nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Control Techniques and Failure Mode of Active Magnetic Bearing in Machine Tool System

verfasst von : Shishir Bisht, Nitin Kumar Gupta, G. D. Thakre

Erschienen in: Advances in Metrology and Measurement of Engineering Surfaces

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Bearing is an integral part of the machine tools system, but due to contact stress, wear is induced, which decreases the life of the machine tools and bearing system. Stress developed due to contact between mating surfaces, i.e., contact stress and friction forces, is the main factor which is affecting the efficiency of a system. To achieve efficiency or to make contact-less levitation, active magnetic bearing are most suitable. This paper gives a basic idea on control techniques and failure modes and their effect on the active magnetic bearing system, by which frictional forces and the vibration should be minimised, which are the primary cause of wear and tear and decentralisation of the shaft. AMB systems are more suitable to increase the life and performance of the machine tools.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Tensile and Flexural Behaviour of Areca Husk Fibre Reinforced Epoxy Composite

Nächstes Kapitel A Technological Review on Temperature Measurement Techniques in Various Machining Processes

Zhang, W., & Zhu, H. (2017). Radial magnetic bearings: An overview. Result in Physics, 3756–3766.

Schweitzer, G., & Maslen E. H. (2009). Magnetic bearings, theory, design, and application to rotating machinery. https://doi.org/10.1007/978-3-642-00497-1

Samanta P., & Hirani, H. (2008, February). Magnetic bearing configurations: Theoretical and experimental studies. IEEE Transactions on Magnetics, 44(2). https://doi.org/10.1109/tmag.2007.912854.

Yuan, Y., Sun, Y., & Xiang, Q. Design and analysis of a magnetic bearings with three degrees of freedom. Chinese Journal of Mechanical Engineering. https://doi.org/10.1186/s10033-019-0320-3.

Madhura, S., & Govindaraju, T. V. (2017). Design and testing of an active magnetic bearing. International Journal of Advance Research in Science and Engineering, 6(10), 257–263.

Naikwad, S. (2016, April). Study of active magnetic bearing. International Journal of Engineering and Technical Research (IJETR), 4(4). ISSN: 2321-0869 (O) 2454-4698 (P).

Lijesh, K. P., & Hirani, H. (2016). Failure mode and effect analysis of active magnetic bearing. Tribology in Industry, 38(1), 90–101.

Pewekar, M. (2018, April) Analysis of active magnetic bearings. Thesis. https://doi.org/10.13140/rg.2.2.28631.37286.

Ludvig, T., & Kuczmann, M. (2008). Design of active magnetic bearing. Journal of optoelectronics and advanced materials, 10(7), 1834–1836.

10.

Muzakkir, S. M., & Lijesh, K. P. (2015, August). Studies on control aspects of active magnetic bearings. International Journal of Current Engineering and Technology, 5(4).

11.

Williams, R. D., Joseph Keith, F., & Allaire, P. E. (1990, February). Digital control of active magnetic bearings. IEEE Transactions on Industrial Electronics, 37(1), 19–27.

12.

Schmidt, E. Design of active magnetic bearing. SzéchenyiIstván University, Department of Telecommunication, Laboratory of Electromagnetic Fields.

13.

Hirani, H., & Samanta, P. (2007). Hybrid (hydrodynamic + permanent magnetic) journal bearings. Proceedings of the Institute of Mechanical Engineers, Part J, Journal of Engineering Tribology, 221(J8), 881–891.

14.

Jozˇef RITONJA, Bosˇtjan POLAJZˇER, et al. (2010). Active magnetic bearings control. In Proceedings of the 29th Chinese Control Conference, July 29–31, 2010, Beijing, China, pp. 5604–5609.

15.

Polajzer, B. (2000). Design of horizontal shaft active magnetic bearing, Slovenia, 2000.

Titel: Control Techniques and Failure Mode of Active Magnetic Bearing in Machine Tool System
verfasst von: Shishir Bisht
Nitin Kumar Gupta
G. D. Thakre
Verlag: Springer Singapore
Buch: Advances in Metrology and Measurement of Engineering Surfaces
Print ISBN: 978-981-15-5150-5

Electronic ISBN: 978-981-15-5151-2

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-15-5151-2_5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht