Skip to main content
Erschienen in: Geotechnical and Geological Engineering 5/2021

13.02.2021 | Original Paper

Cyclic and Dynamic Behavior of Sand–Rubber and Clay–Rubber Mixtures

verfasst von: Sara Rios, Magdalena Kowalska, António Viana da Fonseca

Erschienen in: Geotechnical and Geological Engineering | Ausgabe 5/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this paper, the possibility of using fine scrap tyre rubber to improve the mechanical properties of soil subjected to cyclic loading is addressed. Ground rubber (0.1–0.8 mm) in various proportions (0, 9, 33% and 100% by weight) was mixed with a uniform river sand and a lean clay. Cyclic triaxial tests with bender elements were executed to observe the behaviour of the materials and also to determine damping and shear stiffness parameters. The results have shown that the addition of rubber has significantly decreased the density and shear stiffness of both types of soils, which favours mitigation of vibrations. The shear stiffness degradation at shear strains higher than 10−3 was lower in specimens containing more rubber. Within this strain range, addition of rubber decreased the damping ratio, but increased the normalized accumulated absolute strain energy absorbed by the material. Higher rubber content in sandy specimens resulted in more elastic behaviour, with lower strain accumulation in each loading cycle, eventually resulting in a higher number of loading cycles before failure. The positive effect of rubber presence was not observed in compacted clay–rubber mixture, which sustained less loading cycles than clay alone. The influence of rubber addition in the p′-q stress space was expressed in the form of lower pore pressure generation which shifted the stress path further from the failure envelope.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat Akbulut S, Arasan S, Kalkan E (2007) Modification of clayey soils using scrap tire rubber and synthetic fibers. Appl Clay Sci 38:23–32CrossRef Akbulut S, Arasan S, Kalkan E (2007) Modification of clayey soils using scrap tire rubber and synthetic fibers. Appl Clay Sci 38:23–32CrossRef
Zurück zum Zitat Anastasiadis A, Senetakis K, Pitilakis K (2012) Small-strain shear modulus and damping ratio of sand–rubber and gravel–rubber mixtures. Geotech Geol Eng 30(2):363–382CrossRef Anastasiadis A, Senetakis K, Pitilakis K (2012) Small-strain shear modulus and damping ratio of sand–rubber and gravel–rubber mixtures. Geotech Geol Eng 30(2):363–382CrossRef
Zurück zum Zitat ASTM (ASTM International) (2004) Standard practice for use of scrap tires in civil engineering applications, D 6270–98, vol 11.04 ASTM (ASTM International) (2004) Standard practice for use of scrap tires in civil engineering applications, D 6270–98, vol 11.04
Zurück zum Zitat ASTM (ASTM International) (2010) Standard test method for metal powder specific surface area by physical adsorption. B 922, vol 02.05 ASTM (ASTM International) (2010) Standard test method for metal powder specific surface area by physical adsorption. B 922, vol 02.05
Zurück zum Zitat ASTM (ASTM International) (2011) Standard practice for classification of soils for engineering purposes (unified soil classification system). D 2487–11, vol 04.08 ASTM (ASTM International) (2011) Standard practice for classification of soils for engineering purposes (unified soil classification system). D 2487–11, vol 04.08
Zurück zum Zitat ASTM (ASTM International) (2012) Standard test method for true specific gravity of refractory materials by gas-comparison pycnometer, C604–02 ASTM (ASTM International) (2012) Standard test method for true specific gravity of refractory materials by gas-comparison pycnometer, C604–02
Zurück zum Zitat ASTM (ASTM International) (2016a) Standard test methods for maximum index density and unit weight of soils using a vibratory table, D 4253–16, vol 04.08 ASTM (ASTM International) (2016a) Standard test methods for maximum index density and unit weight of soils using a vibratory table, D 4253–16, vol 04.08
Zurück zum Zitat ASTM (ASTM International) (2016b) Standard test methods for minimum index density and unit weight of soils and calculation of relative density, D 4254–16, vol 04.08 ASTM (ASTM International) (2016b) Standard test methods for minimum index density and unit weight of soils and calculation of relative density, D 4254–16, vol 04.08
Zurück zum Zitat Black DK, Lee KL (1973) Saturating laboratory samples by back pressure. J Soil Mech Found Div ASCE 99(SM1):75–93CrossRef Black DK, Lee KL (1973) Saturating laboratory samples by back pressure. J Soil Mech Found Div ASCE 99(SM1):75–93CrossRef
Zurück zum Zitat Camacho-Tauta J, Cascante G, Viana da Fonseca A, Santos JA (2015) Time and frequency domain evaluation of bender elements systems. Geotechnique 65(7):548–562CrossRef Camacho-Tauta J, Cascante G, Viana da Fonseca A, Santos JA (2015) Time and frequency domain evaluation of bender elements systems. Geotechnique 65(7):548–562CrossRef
Zurück zum Zitat Carraro A, Budagher E, Badanagki M, Kang JB (2013) Sustainable stabilization of sulfate-bearing soil with expansive soil–rubber technology. Technical report no. CDOT-2013–2, March 2013 Carraro A, Budagher E, Badanagki M, Kang JB (2013) Sustainable stabilization of sulfate-bearing soil with expansive soil–rubber technology. Technical report no. CDOT-2013–2, March 2013
Zurück zum Zitat CEN (2010) TS 14243-Materials produced from end of life tires. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities, Brussels CEN (2010) TS 14243-Materials produced from end of life tires. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities, Brussels
Zurück zum Zitat Dunham-Friel J, Carraro JAH (2011) Shear strength and stiffness of expansive soil and rubber (ESR) mixtures in undrained axisymmetric compression. American Society of Civil Engineers, Geotechnical Special Publication, (211 GSP), pp 1111–1120. https://doi.org/https://doi.org/10.1061/41165(397)114 Dunham-Friel J, Carraro JAH (2011) Shear strength and stiffness of expansive soil and rubber (ESR) mixtures in undrained axisymmetric compression. American Society of Civil Engineers, Geotechnical Special Publication, (211 GSP), pp 1111–1120. https://​doi.​org/​https://​doi.​org/​10.​1061/​41165(397)114
Zurück zum Zitat Dyvik R, Madshus C (1985) Lab measurements of Gmax using bender elements. In: Proceedings ASCE annual convention: advances in the art of testing soils under cyclic conditions, Detroit, Michigan, pp 186–197 Dyvik R, Madshus C (1985) Lab measurements of Gmax using bender elements. In: Proceedings ASCE annual convention: advances in the art of testing soils under cyclic conditions, Detroit, Michigan, pp 186–197
Zurück zum Zitat Edil TB, Bosscher PJ (1994) Engineering properties of tire chips and soil mixtures. Geotech Test J 17(4):453–464CrossRef Edil TB, Bosscher PJ (1994) Engineering properties of tire chips and soil mixtures. Geotech Test J 17(4):453–464CrossRef
Zurück zum Zitat Edinçliler A, Baykal G, Saygili A (2010) Influence of different processing techniques on mechanical properties of used tires in embankment construction. Waste Manag 30:1073–1108CrossRef Edinçliler A, Baykal G, Saygili A (2010) Influence of different processing techniques on mechanical properties of used tires in embankment construction. Waste Manag 30:1073–1108CrossRef
Zurück zum Zitat Ehsani M, Shariatmadari N, Mirhosseini SM (2015) Shear modulus and damping ratio of sand-granulated rubber mixtures. J Cent South Univ 22(8):3159–3167CrossRef Ehsani M, Shariatmadari N, Mirhosseini SM (2015) Shear modulus and damping ratio of sand-granulated rubber mixtures. J Cent South Univ 22(8):3159–3167CrossRef
Zurück zum Zitat Esmaeili M, Mosayebi SA, Nakhaee N (2013) Performance of shred tire mixed with railway subgrade in reduction of train induced vibrations. Adv Railw Eng Int J 1(1):37–49 Esmaeili M, Mosayebi SA, Nakhaee N (2013) Performance of shred tire mixed with railway subgrade in reduction of train induced vibrations. Adv Railw Eng Int J 1(1):37–49
Zurück zum Zitat Feng ZY, Sutter KG (2000) Dynamic properties of granulated rubber-sand mixtures. Geotech Test J GTJODJ 23(3):338–344CrossRef Feng ZY, Sutter KG (2000) Dynamic properties of granulated rubber-sand mixtures. Geotech Test J GTJODJ 23(3):338–344CrossRef
Zurück zum Zitat Ghazavi M (2004) Shear strength characteristics of sand-mixed with granular rubber. Geotech Geol Eng 22:401–416CrossRef Ghazavi M (2004) Shear strength characteristics of sand-mixed with granular rubber. Geotech Geol Eng 22:401–416CrossRef
Zurück zum Zitat Gromysz K, Kowalska M (2017) Reduction of vibrations applied on structures—results of chamber tests with the use of tire derived aggregate. Proc Eng 193:305–312CrossRef Gromysz K, Kowalska M (2017) Reduction of vibrations applied on structures—results of chamber tests with the use of tire derived aggregate. Proc Eng 193:305–312CrossRef
Zurück zum Zitat Hazarika H, Kohama E, Sugano T (2008) Underwater shake table tests on waterfront structures protected with tire chips cushion. J Geotech Geoenviron Eng 134(12):1706–1719CrossRef Hazarika H, Kohama E, Sugano T (2008) Underwater shake table tests on waterfront structures protected with tire chips cushion. J Geotech Geoenviron Eng 134(12):1706–1719CrossRef
Zurück zum Zitat Heyer NC (2012) Swell, stiffness and strength of expansive soil–rubber (ESR) mixtures at various scales: effect of specimen and rubber particle sizes. MSc thesis, Colorado State University, Fort Collins Heyer NC (2012) Swell, stiffness and strength of expansive soil–rubber (ESR) mixtures at various scales: effect of specimen and rubber particle sizes. MSc thesis, Colorado State University, Fort Collins
Zurück zum Zitat Hong Y, Yang Z, Orense RP, Lu Y (2015) Investigation of sand–tire mixtures as liquefaction remedial measure. In: Proceedings of 10th Pacific conference on earthquake engineering—building an earthquake resilient Pacific. Australian Earthquake Engineering Society, Sydney, Australia Hong Y, Yang Z, Orense RP, Lu Y (2015) Investigation of sand–tire mixtures as liquefaction remedial measure. In: Proceedings of 10th Pacific conference on earthquake engineering—building an earthquake resilient Pacific. Australian Earthquake Engineering Society, Sydney, Australia
Zurück zum Zitat Indraratna B, Qi Y, Heitor A (2017) Evaluating the Properties of Mixtures of Steel Furnace Slag, Coal Wash, and Rubber Crumbs Used as Subballast. J Mater Civ Eng 30(1):04017251CrossRef Indraratna B, Qi Y, Heitor A (2017) Evaluating the Properties of Mixtures of Steel Furnace Slag, Coal Wash, and Rubber Crumbs Used as Subballast. J Mater Civ Eng 30(1):04017251CrossRef
Zurück zum Zitat Ishibashi I, Zhang X (1993) Unified dynamic shear moduli and damping ratios of sand and clay. Soils Found 33(1):182–191CrossRef Ishibashi I, Zhang X (1993) Unified dynamic shear moduli and damping ratios of sand and clay. Soils Found 33(1):182–191CrossRef
Zurück zum Zitat Ishihara K (1985) Stability of natural deposits during earthquakes. In: Proceedings of 11th international conference on soil mechanics and foundations engineering, San Fransisco, Balkema, pp 321–376 Ishihara K (1985) Stability of natural deposits during earthquakes. In: Proceedings of 11th international conference on soil mechanics and foundations engineering, San Fransisco, Balkema, pp 321–376
Zurück zum Zitat ISO (International Organization for Standardization) (2017) 14688–2 Geotechnical investigation and testing. Identification and classification of soil. Part 2: principles for a classification ISO (International Organization for Standardization) (2017) 14688–2 Geotechnical investigation and testing. Identification and classification of soil. Part 2: principles for a classification
Zurück zum Zitat ISO (International Organization for Standardization) (2015) ISO 60:1977 Plastics - Determination of apparent density of material that can be poured from a specified funnel ISO (International Organization for Standardization) (2015) ISO 60:1977 Plastics -  Determination of apparent density of material that can be poured from a specified funnel
Zurück zum Zitat ISO (International Organization for Standardization) (2018a) ISO 17892-12:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits ISO (International Organization for Standardization) (2018a) ISO 17892-12:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits
Zurück zum Zitat ISO (International Organization for Standardization) (2018b) ISO 17892-9:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils ISO (International Organization for Standardization) (2018b) ISO 17892-9:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils
Zurück zum Zitat Jamiolkowski M (2012) Role of geophysical testing in geotechnical site characterization. Soils Rocks 35(2):117–137 Jamiolkowski M (2012) Role of geophysical testing in geotechnical site characterization. Soils Rocks 35(2):117–137
Zurück zum Zitat JGS (Japanese Geotechnical Society) (2000) Method for cyclic triaxial test to determine deformation properties of geomaterials. JGS 0542–2000 JGS (Japanese Geotechnical Society) (2000) Method for cyclic triaxial test to determine deformation properties of geomaterials. JGS 0542–2000
Zurück zum Zitat Kim H-K, Santamarina JC (2008) Sand–rubber mixtures (large rubber chips). Can Geotech J 45:1457–1466CrossRef Kim H-K, Santamarina JC (2008) Sand–rubber mixtures (large rubber chips). Can Geotech J 45:1457–1466CrossRef
Zurück zum Zitat Kokusho T (1980) Cyclic triaxial test of dynamic soil properties for wide strain range. Soils Found 20(2):45–60CrossRef Kokusho T (1980) Cyclic triaxial test of dynamic soil properties for wide strain range. Soils Found 20(2):45–60CrossRef
Zurück zum Zitat Kramer SL (1996) Geotechnical earthquake engineering. Pearson, Upper Saddle River Kramer SL (1996) Geotechnical earthquake engineering. Pearson, Upper Saddle River
Zurück zum Zitat Kumar SS, Krishna AM, Dey A (2015) Cyclic response of sand using stress controlled cyclic triaxial tests. In: Proceedings of 50th Indian geotechnical conference, 17th–19th December 2015, Pune, Maharashtra, India Kumar SS, Krishna AM, Dey A (2015) Cyclic response of sand using stress controlled cyclic triaxial tests. In: Proceedings of 50th Indian geotechnical conference, 17th–19th December 2015, Pune, Maharashtra, India
Zurück zum Zitat Lee JH, Salgado R, Bernal A, Lovell CW (1999) Shredded tires and rubber-sand as lightweight backfill. J Geotech Geoenviron Eng 125(2):132–141CrossRef Lee JH, Salgado R, Bernal A, Lovell CW (1999) Shredded tires and rubber-sand as lightweight backfill. J Geotech Geoenviron Eng 125(2):132–141CrossRef
Zurück zum Zitat Lee J-S, Dodds J, Santamarina JC (2007) Behavior of Rigid-Soft Particle Mixtures. J Mater Civ Eng 19(2):179–184CrossRef Lee J-S, Dodds J, Santamarina JC (2007) Behavior of Rigid-Soft Particle Mixtures. J Mater Civ Eng 19(2):179–184CrossRef
Zurück zum Zitat Lings ML, Greening PD (2001) A novel bender/extender element for soil testing. Geotechnique 51(8):713–717CrossRef Lings ML, Greening PD (2001) A novel bender/extender element for soil testing. Geotechnique 51(8):713–717CrossRef
Zurück zum Zitat Mashiri MS, Vinod JS, Sheikh MN (2016) Liquefaction potential and dynamic properties of sand-tyre chip (STCh) mixtures. Geotech Test J 39(1):69–79CrossRef Mashiri MS, Vinod JS, Sheikh MN (2016) Liquefaction potential and dynamic properties of sand-tyre chip (STCh) mixtures. Geotech Test J 39(1):69–79CrossRef
Zurück zum Zitat McCartney JS, Ghaaowd I, Fox PJ, Sanders MJ, Thielmann SS, Sander AC (2017) Shearing behavior of tire-derived aggregate with large particle size. II: cyclic simple shear. J Geotech Geoenviron Eng 143(10): 04017079CrossRef McCartney JS, Ghaaowd I, Fox PJ, Sanders MJ, Thielmann SS, Sander AC (2017) Shearing behavior of tire-derived aggregate with large particle size. II: cyclic simple shear. J Geotech Geoenviron Eng 143(10): 04017079CrossRef
Zurück zum Zitat Nakhaei A, Marandi SM, Kermani SS, Bagheripour MH (2012) Dynamic properties of granular soils mixed with granulated rubber. Soil Dyn Earthq Eng 43:124–132CrossRef Nakhaei A, Marandi SM, Kermani SS, Bagheripour MH (2012) Dynamic properties of granular soils mixed with granulated rubber. Soil Dyn Earthq Eng 43:124–132CrossRef
Zurück zum Zitat Özkul ZH, Baykal G (2007) Shear behavior of compacted rubber fiber-clay composite in drained and undrained loading. J Geotech Geoenviron Eng 133(7):767–781CrossRef Özkul ZH, Baykal G (2007) Shear behavior of compacted rubber fiber-clay composite in drained and undrained loading. J Geotech Geoenviron Eng 133(7):767–781CrossRef
Zurück zum Zitat Pistolas GA, Anastasiadis A, Pitilakis K (2018) Dynamic behaviour of granular soil materials mixed with granulated rubber: effect of rubber content and granularity on the small-strain shear modulus and damping ratio. Geotech Geol Eng 36:1267–1281 Pistolas GA, Anastasiadis A, Pitilakis K (2018) Dynamic behaviour of granular soil materials mixed with granulated rubber: effect of rubber content and granularity on the small-strain shear modulus and damping ratio. Geotech Geol Eng 36:1267–1281
Zurück zum Zitat Richart FE, Hall JR, Woods RD (1970) Vibrations of soils and foundations. Prentice Hall, Englewood Cliffs, p 414 Richart FE, Hall JR, Woods RD (1970) Vibrations of soils and foundations. Prentice Hall, Englewood Cliffs, p 414
Zurück zum Zitat Seda JH, Lee JC, Carraro JAH (2007) Beneficial use of waste tire rubber for swelling potential mitigation in expansive soils. Geotechnical Special Publication 172, American Society of Civil Engineers, Denver, pp 1–9 Seda JH, Lee JC, Carraro JAH (2007) Beneficial use of waste tire rubber for swelling potential mitigation in expansive soils. Geotechnical Special Publication 172, American Society of Civil Engineers, Denver, pp 1–9
Zurück zum Zitat Soares M (2015) Evaluation of soil liquefaction potential based on laboratory data. Major factors and limit boundaries. PhD thesis, University do Porto Soares M (2015) Evaluation of soil liquefaction potential based on laboratory data. Major factors and limit boundaries. PhD thesis, University do Porto
Zurück zum Zitat Stempkowska A (2014) Properties of clays and clinkers. Red clay. Report, AGH University of Science and Technology, Kraków (in Polish) Stempkowska A (2014) Properties of clays and clinkers. Red clay. Report, AGH University of Science and Technology, Kraków (in Polish)
Zurück zum Zitat Szczepański T (2017) Saturating overconsolidated cohesive soils: theory and standards versus reality. In: 6th international workshop in situ and lab characterization of OC subsoil, Poznań, pp 93–100 Szczepański T (2017) Saturating overconsolidated cohesive soils: theory and standards versus reality. In: 6th international workshop in situ and lab characterization of OC subsoil, Poznań, pp 93–100
Zurück zum Zitat Tatlisoz N, Edil TB, Benson CH (1998) Interaction between reinforcing geosynthetics and soil-tire chip mixtures. J Geotech Geoenviron Eng 124(11):1109–1119CrossRef Tatlisoz N, Edil TB, Benson CH (1998) Interaction between reinforcing geosynthetics and soil-tire chip mixtures. J Geotech Geoenviron Eng 124(11):1109–1119CrossRef
Zurück zum Zitat Teixeira S (2015) Evaluation and modelling of sandy soil behavior in terms of liquefaction potential. MSc thesis, University of Porto (in Portuguese) Teixeira S (2015) Evaluation and modelling of sandy soil behavior in terms of liquefaction potential. MSc thesis, University of Porto (in Portuguese)
Zurück zum Zitat Thompson DJ, Jiang J, Toward M, Hussein M, Ntotsios E, Dijckmans A, Coulier P, Lombaert G, Degrande G (2016) Reducing railway-induced ground-borne vibration by using open trenches and soft-filled barriers. Soil Dyn Earthq Eng 88:45–59CrossRef Thompson DJ, Jiang J, Toward M, Hussein M, Ntotsios E, Dijckmans A, Coulier P, Lombaert G, Degrande G (2016) Reducing railway-induced ground-borne vibration by using open trenches and soft-filled barriers. Soil Dyn Earthq Eng 88:45–59CrossRef
Zurück zum Zitat Trifunac MD (2003) Nonlinear soil response as a natural passive isolation mechanism. Paper II. The 1933, Long Beach, California Earthquake. Soil Dyn Earthq Eng 23(7):549–562CrossRef Trifunac MD (2003) Nonlinear soil response as a natural passive isolation mechanism. Paper II. The 1933, Long Beach, California Earthquake. Soil Dyn Earthq Eng 23(7):549–562CrossRef
Zurück zum Zitat Tsang H-H, Pitilakis K (2019) Mechanism of geotechnical seismic isolation system: analytical modeling. Soil Dyn Earthq Eng 122:171–184CrossRef Tsang H-H, Pitilakis K (2019) Mechanism of geotechnical seismic isolation system: analytical modeling. Soil Dyn Earthq Eng 122:171–184CrossRef
Zurück zum Zitat Tsang H-H, Lo SH, Xu X, Sheikh MN (2012) Seismic isolation for low-to-medium-rise buildings using granulated rubber–soil mixtures: numerical study. Earthq Eng Struct Dyn 41:2009–2024CrossRef Tsang H-H, Lo SH, Xu X, Sheikh MN (2012) Seismic isolation for low-to-medium-rise buildings using granulated rubber–soil mixtures: numerical study. Earthq Eng Struct Dyn 41:2009–2024CrossRef
Zurück zum Zitat Vieira N, Viana da Fonseca A, Ferreira C (2005) Proceso de saturación de ensayos triaxiales. Geotecnia 104:31–42. Sociedade Portuguesa de Geotecnia (in Spanish) Vieira N, Viana da Fonseca A, Ferreira C (2005) Proceso de saturación de ensayos triaxiales. Geotecnia 104:31–42. Sociedade Portuguesa de Geotecnia (in Spanish)
Zurück zum Zitat Vinot V, Baleshwar S (2013) Shredded tire-sand as fill material for embankment applications. J Environ Res Dev 7(4A):1622–1627 Vinot V, Baleshwar S (2013) Shredded tire-sand as fill material for embankment applications. J Environ Res Dev 7(4A):1622–1627
Zurück zum Zitat Watanabe K, Kusakabe O (2013) Reappraisal of loading rate effects on sand behavior in view of seismic design for pile foundation. Soils Found 53(2):215–231CrossRef Watanabe K, Kusakabe O (2013) Reappraisal of loading rate effects on sand behavior in view of seismic design for pile foundation. Soils Found 53(2):215–231CrossRef
Zurück zum Zitat Yamada Y, Ishihara K (1979) Anisotropic deformation characteristics of sand under three-dimensional stress conditions. Soils Found 19(2):79–94CrossRef Yamada Y, Ishihara K (1979) Anisotropic deformation characteristics of sand under three-dimensional stress conditions. Soils Found 19(2):79–94CrossRef
Zurück zum Zitat Yoon S, Prezzi M, Siddiki NZ, Kim B (2005) Construction of test embankment using sand-tire shred mixture as fill material. Waste Manag 26:1033–1044CrossRef Yoon S, Prezzi M, Siddiki NZ, Kim B (2005) Construction of test embankment using sand-tire shred mixture as fill material. Waste Manag 26:1033–1044CrossRef
Zurück zum Zitat Youwai S, Bergado DT (2003) Strength and deformation characteristics of shredded rubber tire–sand mixtures. Can Geotech J 40:254–264CrossRef Youwai S, Bergado DT (2003) Strength and deformation characteristics of shredded rubber tire–sand mixtures. Can Geotech J 40:254–264CrossRef
Metadaten
Titel
Cyclic and Dynamic Behavior of Sand–Rubber and Clay–Rubber Mixtures
verfasst von
Sara Rios
Magdalena Kowalska
António Viana da Fonseca
Publikationsdatum
13.02.2021
Verlag
Springer International Publishing
Erschienen in
Geotechnical and Geological Engineering / Ausgabe 5/2021
Print ISSN: 0960-3182
Elektronische ISSN: 1573-1529
DOI
https://doi.org/10.1007/s10706-021-01704-3

Weitere Artikel der Ausgabe 5/2021

Geotechnical and Geological Engineering 5/2021 Zur Ausgabe