nach oben

Continuum Mechanics and Thermodynamics

Erschienen in:

20.11.2019 | Original Article

Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson’s ratio

verfasst von: Filippo Agnelli, Andrei Constantinescu, Grigor Nika

Erschienen in: Continuum Mechanics and Thermodynamics | Ausgabe 2/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This work proposes the complete design cycle for several auxetic materials where the cycle consists of three steps (i) the design of the micro-architecture, (ii) the manufacturing of the material and (iii) the testing of the material. We use topology optimization via a level-set method and asymptotic homogenization to obtain periodic micro-architectured materials with a prescribed effective elasticity tensor and Poisson’s ratio. The space of admissible micro-architectural shapes that carries orthotropic material symmetry allows to attain shapes with an effective Poisson’s ratio below \(-\,1\). Moreover, the specimens were manufactured using a commercial stereolithography Ember printer and are mechanically tested. The observed displacement and strain fields during tensile testing obtained by digital image correlation match the predictions from the finite element simulations and demonstrate the efficiency of the design cycle.

Vorheriger Artikel Thermomechanical characterization and modeling of fast-curing polyurethane adhesives

Nächster Artikel Microstructural observations supporting thermography measurements for short glass fibre thermoplastic composites under fatigue loading

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Characteristics of this material can be found in the manufacturers data sheet (see https://dl.airtable.com).

Allaire, G.: Shape Optimization by the Homogenization Method. Springer, New York (2002). https://doi.org/10.1007/978-1-4684-9286-6 CrossRefMATH

Allaire, G., Dapogny, C., Delgado, G., Michailidis, G.: Multi-phase structural optimization via a level set method. ESAIM Control Optim. Calc. Var. 20(2), 576–611 (2014). https://doi.org/10.1051/cocv/2013076 MathSciNetCrossRefMATH

Allaire, G., Jouve, F., Toader, A.: Structural optimization using sensitivity analysis and a level-set method. J. Comput. Phys. 194(1), 363–393 (2004). https://doi.org/10.1016/j.jcp.2003.09.032 MathSciNetCrossRefMATHADS

Allaire, G., Pantz, O.: Structural optimization with FreeFem++. Struct. Multidiscip. Optim. 32(3), 173–181 (2006). https://doi.org/10.1007/s00158-006-0017-y MathSciNetCrossRefMATH

Allais, L., Bornert, M., Bretheau, T., Caldemaison, D.: Experimental characterization of the local strain field in a heterogeneous elastoplastic material. Acta Metall. Mater. 42(11), 3865–3880 (1994). https://doi.org/10.1016/0956-7151(94)90452-9 CrossRef

Almgren, R.F.: An isotropic three-dimensional structure with Poisson’s ratio \(= -\,1\). J. Elast. 15(4), 427–430 (1985). https://doi.org/10.1007/BF00042531 CrossRef

Babaee, S., Shim, J., Weaver, J.C., Chen, E.R., Patel, N., Bertoldi, K.: 3D soft metamaterials with negative Poisson’s ratio. Adv. Mater. 25(36), 5044–5049 (2013). https://doi.org/10.1002/adma.201301986 CrossRef

Bakhvalov, N., Panasenko, G.: Homogenisation: Averaging Processes in Periodic Media. Springer, Dordrecht (1989). https://doi.org/10.1007/978-94-009-2247-1 CrossRefMATH

Bendsøe, M.P., Sigmund, O.: Topology Optimization: Theory, Methods and Applications. Springer, Berlin (2004). https://doi.org/10.1007/978-3-662-05086-6 CrossRefMATH

10.

Carraturo, M., Rocca, E., Bonetti, E., Hömberg, D., Reali, A., Auricchio, F.: Graded-material design based on phase-field and topology optimization. Comput. Mech. (2019). https://doi.org/10.1007/s00466-019-01736-w MathSciNetCrossRefMATH

11.

Choi, J.B., Lakes, R.S.: Fracture toughness of re-entrant foam materials with a negative Poisson’s ratio: experiment and analysis. Int. J. Fract. 80(1), 73–83 (1996). https://doi.org/10.1007/BF00036481 CrossRef

12.

Clausen, A., Wang, F., Jensen, J.S., Sigmund, O., Lewis, J.A.: Topology optimized architectures with programmable Poisson’s ratio over large deformations. Adv. Mater. 27(37), 5523–5527 (2015). https://doi.org/10.1002/adma.201502485 CrossRef

13.

Duncan, O., Shepherd, T., Moroney, C., Foster, L., Venkatraman, P.D., Winwood, K., Allen, T., Alderson, A.: Review of auxetic materials for sports applications: expanding options in comfort and protection. Appl. Sci. 8(6), 941 (2018). https://doi.org/10.3390/app8060941 CrossRef

14.

Evans, K.E.: Auxetic polymers: a new range of materials. Endeavour 15(4), 170–174 (1991). https://doi.org/10.1016/0160-9327(91)90123-S CrossRef

15.

Friis, E.A., Lakes, R.S., Park, J.B.: Negative Poisson’s ratio polymeric and metallic foams. J. Mater. Sci. 23(12), 4406–4414 (1988). https://doi.org/10.1007/bf00551939 CrossRefADS

16.

Gao, J., Li, H., Luo, Z., Gao, L., Li, P.: Topology optimization of micro-structured materials featured with the specific mechanical properties. Int. J. Comput. Methods (2018). https://doi.org/10.1142/S021987621850144X MathSciNetCrossRef

17.

Greaves, G.N., Greer, A.L., Lakes, R.S., Rouxel, T.: Poisson’s ratio and modern materials. Nat. Mater. 10(11), 823–837 (2011). https://doi.org/10.1038/nmat3134 CrossRefADS

18.

Grima, J.N., Zammit, V., Gatt, R., Alderson, A., Evans, K.E.: Auxetic behaviour from rotating semi-rigid units. Phys. Status Solidi B 244(3), 866–882 (2007). https://doi.org/10.1002/pssb.200572706 CrossRefADS

19.

Hecht, F.: New development in FreeFem++. J. Numer. Math. (2012). https://doi.org/10.1515/jnum-2012-0013

20.

Hou, S., Liu, T., Zhang, Z., Han, X., Li, Q.: How does negative Poisson’s ratio of foam filler affect crashworthiness? Mater. Des. 82, 247–259 (2015). https://doi.org/10.1016/j.matdes.2015.05.050 CrossRef

21.

Imbalzano, G., Tran, P., Ngo, T.D., Lee, P.V.S.: A numerical study of auxetic composite panels under blast loadings. Compos. Struct. 135, 339–352 (2016). https://doi.org/10.1016/j.compstruct.2015.09.038 CrossRef

22.

Jantos, D.R., Riedel, C., Hackl, K., Junker, P.: Comparison of thermodynamic topology optimization with SIMP. Continu. Mech. Thermodyn. 31(2), 521–548 (2018). https://doi.org/10.1007/s00161-018-0706-y MathSciNetCrossRefADS

23.

Lakes, R.S.: Foam structures with a negative Poisson’s ratio. Science 235(4792), 1038–1040 (1987). https://doi.org/10.1126/science.235.4792.1038 CrossRefADS

24.

Lakes, R.S.: Advances in negative Poisson’s ratio materials. Adv. Mater. 5(4), 293–296 (1993). https://doi.org/10.1002/adma.19930050416 CrossRef

25.

Lakes, R.S., Elms, K.: Indentability of conventional and negative Poisson’s ratio foams. J. Compos. Mater. 27(12), 1193–1202 (1993). https://doi.org/10.1177/002199839302701203 CrossRefADS

26.

Larsen, U.D., Sigmund, O., Bouwsta, S.: Design and fabrication of compliant micromechanisms and structures with negative Poisson’s ratio. J. Microelectromech. Syst. 6(2), 99–106 (1997). https://doi.org/10.1109/84.585787 CrossRef

27.

Li, T., Chen, Y., Hu, X., Li, Y., Wang, L.: Exploiting negative Poisson’s ratio to design 3D-printed composites with enhanced mechanical properties. Mater. Des. 142, 247–258 (2018). https://doi.org/10.1016/j.matdes.2018.01.034 CrossRef

28.

Mei, C.C., Vernescu, B.: Homogenization Methods for Multiscale Mechanics. World Scientific, Singapore (2010). https://doi.org/10.1142/7427

29.

Milton, G.W.: Composite materials with poisson’s ratios close to \(-\,1\). J. Mech. Phys. Solids 40(5), 1105–1137 (1992). https://doi.org/10.1016/0022-5096(92)90063-8 MathSciNetCrossRefMATHADS

30.

Milton, G.W., Cherkaev, A.V.: Which elasticity tensors are realizable? J. Eng. Mater. Technol. 117(4), 483 (1995). https://doi.org/10.1115/1.2804743 CrossRef

31.

Nika, G., Constantinescu, A.: Design of multi-layer materials using inverse homogenization and a level set method. Comput. Methods Appl. Mech. Eng. 346, 388–409 (2019). https://doi.org/10.1016/j.cma.2018.11.029 MathSciNetCrossRefADS

32.

Osher, S., Sethian, J.A.: Fronts propagating with curvature-dependent speed: algorithms based on Hamilton–Jacobi formulations. J. Comput. Phys. 79(1), 12–49 (1988). https://doi.org/10.1016/0021-9991(88)90002-2 MathSciNetCrossRefMATHADS

33.

Ranaivomiarana, N., Irisarri, F.X., Bettebghor, D., Desmorat, B.: Concurrent optimization of material spatial distribution and material anisotropy repartition for two-dimensional structures. Contin. Mech. Thermodyn. 31(1), 133–146 (2018). https://doi.org/10.1007/s00161-018-0661-7 MathSciNetCrossRefMATHADS

34.

Réthoré, J., Leygue, A., Coret, M., Stainier, L., Verron, E.: Computational measurements of stress fields from digital images. Int. J. Numer. Methods Eng. 113(12), 1810–1826 (2017). https://doi.org/10.1002/nme.5721 MathSciNetCrossRef

35.

Sanchez-Palencia, E., Zaoui, A.: Homogenization Techniques for Composite Media. Springer, Berlin (1987). https://doi.org/10.1007/3-540-17616-0 MATH

36.

Saxena, K.K., Das, R., Calius, E.P.: Three decades of auxetics research—materials with negative Poisson’s ratio: a review. Adv. Eng. Mater. 18(11), 1847–1870 (2016). https://doi.org/10.1002/adem.201600053 CrossRef

37.

Sigmund, O.: Materials with prescribed constitutive parameters: an inverse homogenization problem. Int. J. Solids Struct. 31(17), 2313–2329 (1994). https://doi.org/10.1016/0020-7683(94)90154-6 MathSciNetCrossRefMATH

38.

Spadoni, A., Ruzzene, M., Gonella, S., Scarpa, F.: Phononic properties of hexagonal chiral lattices. Wave Motion 46(7), 435–450 (2009). https://doi.org/10.1016/j.wavemoti.2009.04.002 MathSciNetCrossRefMATH

39.

Ting, T.C.T., Chen, T.: Poisson’s ratio for anisotropic elastic materials can have no bounds. Q. J. Mech. Appl. Math. 58(1), 73–82 (2005). https://doi.org/10.1093/qjmamj/hbh021 MathSciNetCrossRefMATH

40.

Vogiatzis, P., Chen, S., Wang, X., Li, T., Wang, L.: Topology optimization of multi-material negative Poisson’s ratio metamaterials using a reconciled level set method. Comput. Aided Des. 83, 15–32 (2017). https://doi.org/10.1016/j.cad.2016.09.009 MathSciNetCrossRef

41.

Wang, F., Sigmund, O., Jensen, J.S.: Design of materials with prescribed nonlinear properties. J. Mech. Phys. Solids 69, 156–174 (2014). https://doi.org/10.1016/j.jmps.2014.05.003 MathSciNetCrossRefADS

42.

Wang, X., Mei, Y., Wang, M.Y.: Level-set method for design of multi-phase elastic and thermoelastic materials. Int. J. Mech. Mater. Des. 1(3), 213–239 (2004). https://doi.org/10.1007/s10999-005-0221-8 CrossRef

43.

Wang, Y., Luo, Z., Zhang, N., Kang, Z.: Topological shape optimization of microstructural metamaterials using a level set method. Comput. Mater. Sci. 87, 178–186 (2014). https://doi.org/10.1016/j.commatsci.2014.02.006 CrossRef

44.

Zhang, H., Luo, Y., Kang, Z.: Bi-material microstructural design of chiral auxetic metamaterials using topology optimization. Compos. Struct. 195, 232–248 (2018). https://doi.org/10.1016/j.compstruct.2018.04.058 CrossRef

Titel: Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson’s ratio
verfasst von: Filippo Agnelli
Andrei Constantinescu
Grigor Nika
Publikationsdatum: 20.11.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Continuum Mechanics and Thermodynamics / Ausgabe 2/2020
Print ISSN: 0935-1175
Elektronische ISSN: 1432-0959
DOI: https://doi.org/10.1007/s00161-019-00851-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2020

Thermomechanical characterization and modeling of fast-curing polyurethane adhesives

Modeling and simulation of the curing process of epoxy resins using finite elements

Experimental study and phenomenological modelling of flaw sensitivity of two polymers used as dielectric elastomers

Strain-induced crystallisation in natural rubber: a thermodynamically consistent model of the material behaviour using a multiphase approach

Foreword

Modelling the curing process in particle-filled electro-active polymers with a dispersion anisotropy

Premium Partner

Marktübersichten