nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

Design of a New Multi-element Beta Titanium Alloy Based on d-Electron Method

verfasst von : S. Sadeghpour, S. M. Abbasi, M. Morakabati

Erschienen in: TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A new beta titanium alloy in the Ti-Al-Mo-Cr-V system has been designed using the d-electron method with the aim of activating a combination of different deformation mechanisms. In this regard Ti-3Al-5Mo-7V-3Cr (Ti-3573) alloy has been designed and compared with a commercial Ti-5Al-5Mo-5V-3Cr (Ti-5553) alloy. To evaluate the accuracy of the d-electron theoretical predictions, uniaxial compression tests were performed at room temperature. The deformation mechanism of Ti-3573 was found to be a combination of slip, stress-induced martensitic transformation and mechanical twinning. As a result of the combined deformation mechanisms, the designed alloy showed enhanced compressive strength and ductility in comparison to the Ti-5553 alloy. The results showed that in the case of twinning the prediction by the d-electron method is consistent with experimental observations but regarding the stress-induced martensitic transformation this method should be used with modifications to the d-electron phase stability map.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Coupling Void Coalescence Criteria in Finite Element Models: Application to Tensile Test

Nächstes Kapitel Effects of Oxygen on the Density of States and Elastic Properties of Hafnium—First Principles Calculations

Hanada S, Izumi O (1986) MTA 17:1409CrossRef

Xing H, Sun J (2008) Mechanical twinning and omega transition by <111> {112} shear in a metastable β titanium alloy. Appl Phys Lett 93:031908CrossRef

Bertrand E, Castany P, Péron I, Gloriant T (2011) Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis. Scr Mater 64:1110–1113CrossRef

Ohyama H, Nishimura T (1995) Effects of alloying elements on deformation mode in Ti-V based b titanium alloy system. ISIJ Int 35:927–936CrossRef

Min XH, Emura S, Nishimura T, Tsuchiya K, Tsuzaki K (2010) Microstructure, tensile deformation mode and crevice corrosion resistance in Ti-10Mo-xFe alloys. Mater Sci Eng A 527:5499–5506CrossRef

Min XH, Emura S, Sekido N, Nishimura T, Tsuchiya K, Tsuzaki K (2010) Effects of Fe addition on tensile deformation mode and crevice corrosion resistance in Ti-15Mo alloy. Mater Sci Eng A 527:2693–2701CrossRef

Bhattacharjee A, Varma VK, Kamat SV, Gogia AK, Bhargava S (2006) Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti-10V-2Fe-3Al. Metall Mat Trans A 37:1423–1433CrossRef

Paradkar A, Kashyap BP, Gogia AK, Kamat SV (2009) On the influence of alloy composition on the fracture toughness of two-phase Ti-Al-Nb alloys undergoing stress-induced martensitic transformation. Metall Mat Trans A 40:1604–1610CrossRef

Paradkar AG, Kamat SV, Gogia AK, Kashyap BP (2009) On the validity of Hall-Petch equation for single-phase β Ti-Al-Nb alloys undergoing stress-induced martensitic transformation. Mater Sci Eng, A 520:168–173CrossRef

10.

Friák M, Counts WA, Ma D, Sander B, Holec D, Raabe D et al (2012) Theory-guided materials design of multi-phase Ti-Nb alloys with bone-matching elastic properties. Materials 5:1853–1872CrossRef

11.

Raabe D, Sander B, Friák M, Ma D, Neugebauer J (2007) Theory-guided bottom-up design of β-titanium alloys as biomaterials based on first principles calculations: Theory and experiments. Acta Mater 55:4475–4487CrossRef

12.

Abdel-Hady M, Hinoshita K, Morinaga M (2006) General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters. Scr Mater 55:477–480CrossRef

13.

Kuroda D, Niinomi M, Morinaga M, Kato Y, Yashiro T (1998) Design and mechanical properties of new β type titanium alloys for implant materials. Mater Sci Eng A 243:244–249CrossRef

14.

Morinaga M, Yukawa N, Maya T, Sone K, Adachi H (1988) Theoretical design of titanium alloys. In: Sixth world conference on titanium III. Cannes, p 1601

15.

Abdel-Hady M, Hinoshita K, Fuwa H, Murata Y, Morinaga M (2008) Change in anisotropy of mechanical properties with β-phase stability in high Zr-containing Ti-based alloys. Mater Sci Eng A 480:167–174CrossRef

16.

Laheurte P, Prima F, Eberhardt A, Gloriant T, Wary M, Patoor E (2010) Mechanical properties of low modulus beta titanium alloys designed from the electronic approach. J Mech Behav Biomed Mater 3:565–573CrossRef

17.

Brozek C, Sun F, Vermaut P, Millet Y, Lenain A, Embury D et al (2016) A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties. Scr Mater 114:60–64CrossRef

18.

Marteleur M, Sun F, Gloriant T, Vermaut P, Jacques PJ, Prima F (2012) On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects. Scr Mater 66:749–752CrossRef

19.

Sun F, Zhang JY, Marteleur M, Brozek C, Rauch EF, Veron M et al (2015) A new titanium alloy with a combination of high strength, high strain hardening and improved ductility. Scr Mater 94:17–20CrossRef

20.

Fanning JC (2005) Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6Fe). J Materi Eng Perform 14:788–791CrossRef

21.

Morinaga M, Murata Y, Yukawa H (2007) Molecular orbital approach to alloy design. In: Bozzolo G, Noebe RD, Abel PB (eds) Applied computational materials modeling: theory, simulation and experiment. Springer, USA, pp 255–306CrossRef

22.

Yang Y, Wu SQ, Li GP, Li YL, Lu YF, Yang K et al (2010) Evolution of deformation mechanisms of Ti-22.4Nb-0.73Ta-2Zr-1.34O alloy during straining. Acta Mater 58:2778–2787CrossRef

23.

Qu L, Yang Y, Lu YF, Feng L, Ju JH, Ge P et al (2013) A detwinning process of {332} <113> twins in beta titanium alloys. Scr Mater 69:389–392CrossRef

24.

Min XH, Tsuzaki K, Emura S, Sawaguchi T, Ii S, Tsuchiya K (2013) {332} <113> Twinning system selection in a β-type Ti-15Mo-5Zr polycrystalline alloy. Mater Sci Eng A 579:164–169CrossRef

25.

Sun F, Zhang JY, Marteleur M, Gloriant T, Vermaut P, Laillé D et al (2013) Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects. Acta Mater 61:6406–6417CrossRef

26.

Zhou X, Xa Min, Emura S, Tsuchiya K (2017) Accommodative {332} <113> primary and secondary twinning in a slightly deformed β-type Ti-Mo titanium alloy. Mater Sci Eng A 684:456–465CrossRef

27.

Li C, Wu X, Chen JH, van der Zwaag S (2011) Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti-10 V-2Fe-3Al. Mater Sci Eng, A 528:5854–5860CrossRef

28.

Li C, Chen JH, Wu X, Wang W, van der Zwaag S (2012) Tuning the stress induced martensitic formation in titanium alloys by alloy design. J Mater Sci 47:4093–4100CrossRef

29.

Ahmed M, Wexler D, Casillas G, Ivasishin OM, Pereloma EV (2015) The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy. Acta Mater 84:124–135CrossRef

30.

Grosdidier T, Philippe MJ (2000) Deformation induced martensite and superelasticity in a β-metastable titanium alloy. Mater Sci Eng A 291:218–223CrossRef

31.

Hao YL, Li SJ, Sun SY, Zheng CY, Yang R (2007) Elastic deformation behaviour of Ti-24Nb-4Zr-7.9Sn for biomedical applications. Acta Biomater 3:277–286CrossRef

Titel: Design of a New Multi-element Beta Titanium Alloy Based on d-Electron Method
verfasst von: S. Sadeghpour
S. M. Abbasi
M. Morakabati
Verlag: Springer International Publishing
Buch: TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings
Print ISBN: 978-3-319-72525-3

Electronic ISBN: 978-3-319-72526-0

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-319-72526-0_36

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht