nach oben

Water Resources Management

Erschienen in:

01.01.2013

Design of a Pumping Main Considering Pipeline Failure

verfasst von: Prabhata K. Swamee, Ashok K. Sharma

Erschienen in: Water Resources Management | Ausgabe 1/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Cost and reliability are two diametrically opposite objectives in a pumping main design as the objective of an uninterrupted supply of water will increase the system cost. In this investigation, a methodology for pumping main design is presented by considering the costs of pumping main and pipeline breakage. Although it has been found that there is no clear-cut optimum point in such a design objective, there is however, a set of non-dominated points called Pareto-optimal front which can be used to optimize pipe diameter. It is hoped that this methodology will be useful to design engineers engaged in the design of pumping mains and will also result in the cost savings to water service providers.

Vorheriger Artikel The Compensation Mechanism and Water Quality Impacts of Agriculture-Urban Water Transfers: A Case Study in China’s Chaobai Watershed

Nächster Artikel Estimation of Geomorphological Parameters of Lower Zab River-Basin by Using GIS-Based Remotely Sensed Image

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Boxall JB, O’Hagan A, Pooladsaz S, Saul AJ, Unwin DM (2007) Estimation of burst rates in water distribution mains. Proc. Inst. of Civil Engineers, Water Management 160(WM2), 73–82

Christodoulou S, Agathokleous A, Charalmbous B, Adamou B (2010) Proactive risk-based integrity assessment of water distribution networks. Water Resour Manag 24(13):3715–3730CrossRef

Clark RM, Stafford CL, Goodrich JA (1982) Water distribution systems: a spatial and cost evaluation. J Water Resour Plan Manag Div 108:243–256

Deb K (2001) Multi-objective optimization using evolutionary algorithms. Wiley, New York

Farmani R, Walters GA, Savic DA (2005) Trade-off between total cost and reliability for Anytown water distribution network. J Water Resour Plan Manag ASCE 131(3):161–171CrossRef

Goulter IC, Davidson J, Jacobs P (1993) Predicting water main breakage rate. J Water Resour Plan Manag ASCE 119(4):419–436CrossRef

Gupta R, Bhave PR (1994) Reliability analysis of water distribution systems. J Environ Eng ASCE 120(2):447–460CrossRef

Kettler AJ, Goulter IC (1985) An analysis of pipe breakage in urban water distribution networks. Can J Civil Eng 12:286–293CrossRef

Shamir U, Howard C (1979) An analytical approach to scheduling pipe replacement. J Am Water Works Assoc 71:248–258

Shooman ML (1968) Probabilistic reliability: an engineering approach. McGraw-Hill Book Co., New York

Soltanjalili M, Bozorg-Haddad O, Marino MA (2011) Effect of breakage level one in design of water distribution networks. Water Resour Manag 25(1):311–337CrossRef

Swamee PK, Jain AK (1976) Explicit equations for pipe flow problems. J Hydraul Eng ASCE 102(5):657–664

Swamee PK, Sharma AK (2008) Design of water supply pipe networks. Wiley-Inter Science, HobokenCrossRef

Todini E (2000) Looped water distribution networks design using a resilience index based heuristic approach. Urban Water 2(2):115–122CrossRef

Xu C, Goulter IC (1999) Reliability based optimal design of water distribution networks. J Water Resour Plan Manag ASCE 125(6):352–362CrossRef

Titel: Design of a Pumping Main Considering Pipeline Failure
verfasst von: Prabhata K. Swamee
Ashok K. Sharma
Publikationsdatum: 01.01.2013
Verlag: Springer Netherlands
Erschienen in: Water Resources Management / Ausgabe 1/2013
Print ISSN: 0920-4741
Elektronische ISSN: 1573-1650
DOI: https://doi.org/10.1007/s11269-012-0178-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1/2013

Estimating the Impact of Water Pricing on Water Use Efficiency in Semi-arid Cropping System: An Application of Probabilistically Constrained Nonparametric Efficiency Analysis

Residential Water Use: Efficiency, Affordability, and Price Elasticity

Implementing Pollution Source Control—Learning from the Innovation Process in English and Welsh Water Companies

Hydrological Drought Assessment in Northwestern Iran Based on Streamflow Drought Index (SDI)

Tap Water Costs and Service Sustainability, a Close Relationship

Estimation of Geomorphological Parameters of Lower Zab River-Basin by Using GIS-Based Remotely Sensed Image