nach oben

Bulletin of Engineering Geology and the Environment

Erschienen in:

01.05.2008 | Original Paper

Determination of the thermal conductivity from physico-mechanical properties

verfasst von: E. Yaşar, Y. Erdoğan, H. Güneyli

Erschienen in: Bulletin of Engineering Geology and the Environment | Ausgabe 2/2008

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Samples of limestone, dolomite, dolomitic limestone, marble, travertine, sandstone, siltstone, andesite, basalt and porous basalt from different parts of Turkey were tested to obtain their UCS, porosity, water absorption, density, P-wave velocity and thermal conductivity (TC). It was observed that while TC increased with density, P-wave velocity and UCS, it decreased with increasing porosity. Equations are presented to allow an assessment of TC from these physico-mechanical properties.

Vorheriger Artikel Study of the behaviour of schist grains under crushing

Nächster Artikel Design of large cuttings in jointed rock

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Anderson DL (1967) A seismic equation of state. Geophys J R Astron Soc 13:9–30

ASTM C 1045-90 (1990) Practice for the calculation of thermal transmission properties from steady state heat flux measurements. American Society for Testing and Materials, Pennsylvania

ASTM C 1113-90 (1990) Test method for thermal conductivity of refractories by hot wire, Platinum Resistance Thermometer Technique. American Society for Testing and Materials, Philadelphia

Birch F (1961) The velocity of compression waves in rocks to 10 kbars (Part I) J. Geophys Res 66:2199–2224CrossRef

British Standards Institute (1986) Determining thermal insulating properties, guarded hot plate method. Part 2: Sect. 2.1 BS 874

Çanakcı H, Demirboğa R, Karakoç BM, Şirin O (2007) Thermal conductivity of limestone from Gaziantep (Turkey). Build Environ 42:1777–1782CrossRef

Harmathy TZ (1970) Thermal properties of concrete at elevated temperatures. J Mater 5:47–74

Hasan A (1999) Optimising insulation thickness for buildings using life cycle cost. Appl Energy 63:115–124. Elsevier, Amsterdam

Horai KI, Simmons G (1969) Thermal conductivity of rock forming minerals. Earth Planet Sci Lett 6:358–368

Horai KI, Simmons G (1970) An empirical relationship between thermal conductivity and Debye temperature for silicates. J Geophys Res 75:978–982CrossRef

ISRM (1972) Committee on Laboratory Tests. Suggested methods for determining water content, porosity, density, absorption and related properties, Int J Rock Mech Min Sci Geomech, p 12 (Abstract)

Incropera FP, Dewitt DP (1990) Fundamentals of heat and mass transfer. Wiley, New York

Marshall AL (1972) The thermal properties of concrete. Build Sci 7:167–74CrossRef

Mavko G, Mukerji T, Dvorkin J (1998) The rock physics handbook, Cambridge University Press, London, 329p

Özkahraman HT, Selver R, Işık EC (2004) Determination of the thermal conductivity of rock from P-wave velocity. Int J Rock Mech Min Sci 40:703–708

Smorodinov MI, Motovilov EA, Volkov VA (1970) Determinations of correlation relationships between strength and some physical characteristics of rocks. In: Proceedings of the 2nd Congress of the International Society of Rock Mechanics, Belgrade, vol 2, pp 35–37

Yaşar E, Erdoğan Y (2004) Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. Int J Rock Mech Min Sci 41:871–875CrossRef

Titel: Determination of the thermal conductivity from physico-mechanical properties
verfasst von: E. Yaşar
Y. Erdoğan
H. Güneyli
Publikationsdatum: 01.05.2008
Verlag: Springer-Verlag
Erschienen in: Bulletin of Engineering Geology and the Environment / Ausgabe 2/2008
Print ISSN: 1435-9529
Elektronische ISSN: 1435-9537
DOI: https://doi.org/10.1007/s10064-008-0126-5

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2008

Design of large cuttings in jointed rock

Fracture properties of marble–mortar compounds

Engineering geology and future stability of the El Risco landslide, NW-Gran Canaria, Spain

Determination of mechanical properties of rocks using simple methods

Comparison of three Tunisian clayey soils for containing acid waste

Relationship between cleavage orientation, uniaxial compressive strength and Young’s modulus for slates in NW Spain