nach oben

Rheologica Acta

Erschienen in:

01.12.2011 | Original Contribution

Dispersion of multi-walled carbon nanotubes in PDMS/PB blend

verfasst von: Joung Sook Hong, Chongyoup Kim

Erschienen in: Rheologica Acta | Ausgabe 11-12/2011

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, the sequential dispersion of multi-walled carbon nanotubes (CNTs) in PDMS/PB (polydimethylsiloxane/polybutene) blends and the change of blend morphology by the dispersion of CNTs were investigated by rheological and morphological observations. The dispersion of CNTs into PDMS/PB blend was accomplished by the dilution of the CNT master (2 wt.% CNT in PDMS) in PDMS/PB blend using an extensional mixer. The morphological study shows that under the extensional flow, CNTs in the dispersed CNT master phase are mainly broken up by tip-streaming and the continuous pinching-off of PDMS drops during morphology evolution enhances the dispersion of CNT. It has been shown that CNTs can be disentangled as in the case of dispersing CNTs in a Boger fluid. Rheological data and TEM observations show that it is not simply a mixing of two phases and the CNTs in the master phase can be dispersed in the single CNT level.

Vorheriger Artikel Slope effect on core-annular flow

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Acrivos A, Lo TS (1978) Deformation and breakup of a single slender drop in an extensional flow. J Fluid Mech 86:641–672CrossRef

Baudouin AC, Devaux J, Bailly C (2010) Localization of carbon nanotubes at the interface in blends of polyamide and ethylene–acrylate copolymer. Polymer 51:1341–1354CrossRef

Bose S, Ozdilek C, Leys J, Sew JW, Wubbenhorst M, Vermant J, Moldenaers P (2010) Phase separation as a tool to control dispersion of multiwall carbon nanotubes in polymeric blends. App Mat Interfaces 2(3):800–807CrossRef

Doi M, Edwards SF (1986) The theory of polymer dynamics. Oxford University Press, New York

Hemelrijck EV, Puyvelde PV, Macosko CW, Moldenaers P (2005) The effect of block copolymer architecture on the coalescence and interfacial elasticity in compatibilized polymer blends. J Rheol 49(3):783–798CrossRef

Hobbie EK, Fry DJ (2006) Nonequilibrium phase diagram of sticky nanotube suspensions. Phys Rev Lett 97:036101CrossRef

Hong JS, Kim C (2007) Extension-induced dispersion of multi-walled carbon nanotube in non-Newtonian fluid. J Rheol 51:833–850CrossRef

Hong JS, Kim C (2010) Generation of sub-micron-sized droplets, by continuous extensional flow. J Non-Newt Fluid Mech 165:681–686CrossRef

Hong JS, Kim YK, Ahn KH, Lee SJ, Kim C (2007) Interfacial tension reduction of PBT/PE blends by nanoclay. Rheol Acta 46(4):469–478CrossRef

Hong JS, Kim YK, Ahn KH, Lee SJ (2008) Shear-induced migration of nanoclay during morphology evolution of PBT/PS blend. J App Polym Sci 108:565–575CrossRef

Huang YY, Ahir SV, Terentjev EM (2006) Dispersion rheology of carbon nanotubes in a polymer matrix. Phys Rev B 73:125422CrossRef

Kang J, Lee J, Kim TH, Park J, Seong MJ, Hong S (2008) Large scale assembly of carbon Nanotube based flexible circuits for DNA sensors. Nanotechnology 19:135305CrossRef

Larson RG (1999) The structure and rheology of complex fluids. Oxford University Press, New York

Lin-Gibson S, Pathak JA, Grulke EA, Wang H, Hobbie EK (2004) Elastic flow instability in nanotube suspensions. Phys Rev Lett 92(4):048302CrossRef

Ma AWK, Mackley MR, Rahatekar SS (2007) Experimental observation on the flow-induced assembly of carbon nanotube suspensions to form helical bands. Rheol Acta 46:979–987CrossRef

Martin JD, Velankar SS (2007) Effect of compatibilizer on immiscible polymer blends near phase inversion. J Rheol 51(4):669–6992CrossRef

Miliken WJ, Leal LG (1991) Deformation and breakup of viscoelastic drops in planar extensional flows. J Non-Newt Fluid Mech 40:355–379CrossRef

Montesi A, Pena AA, Pasquali M (2004) Volticity alignment and negative normal stresses in sheared attractive emulsions. Phys Rev Lett 92(5):058303CrossRef

Pegel S, Potschke P, Petzold G, Alig I, Dudkin SM, Lellinger D (2008) Dispersion, agglomeration, and network formation of multiwalled carbon nanotubes in polycarbonate melts. Polymer 49:974–984CrossRef

Potschke P, Bhattacharyya AR, Janke A (2004) Melt mixing of polycarbonate with multiwalled carbon nanotubes: microscopic studies on the state of dispersion. Eur Polym J 40:137–148CrossRef

Potschke P, Pegel S, Clases M, Bonduel D (2008) A novel strategy to incorporate carbon nanotubes into thermoplastic matrices. Macro Rapid Comm 29:244–251CrossRef

Start PR, Hudson SD, Hobbie EK, Migler KB (2006) Breakup of carbon nanotube flocs in microfluidic traps. J Colloid Int Sci 297:631–636CrossRef

Taylor GI (1934) The formation of emulsions in definable fields of flow. Proc R Soc London Ser A 146:501–523CrossRef

Tirtaatmadja V, Sridhar T (1993) A filament stretching device for measurement of extensional viscosity. J Rheol 37:1081–1102CrossRef

Tufano C, Peters GW, Meijer HEH (2008) Confined flow of polymer blends. Langmuir 24(9):4494–4505CrossRef

Vermant J, Cioccolo G, Nair K G and Moldenaers P (2004) Coalescence suppression in model immiscible polymer blends by nano-sized colloidal particles. Rheol Acta 43(5):529–538CrossRef

Wu S (1982) Polymer interface and adhesion. Marcel Dekker, New York

Wu M, Shaw L (2006) Electrical and mechanical behaviors of carbon nanotube filled polymer blends. J App Polym Sci 99:477–488CrossRef

Titel: Dispersion of multi-walled carbon nanotubes in PDMS/PB blend
verfasst von: Joung Sook Hong
Chongyoup Kim
Publikationsdatum: 01.12.2011
Verlag: Springer-Verlag
Erschienen in: Rheologica Acta / Ausgabe 11-12/2011
Print ISSN: 0035-4511
Elektronische ISSN: 1435-1528
DOI: https://doi.org/10.1007/s00397-011-0581-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 11-12/2011

Extensional rheology of human saliva

Slope effect on core-annular flow

Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry

Viscoelastic properties of a silicone resin during crosslinking

Flow behaviour of highly concentrated emulsions of supersaturated aqueous solution in oil

Strain stiffening of non-colloidal hard sphere suspensions dispersed in Newtonian fluid near liquid-and-crystal coexistence region

Premium Partner

Marktübersichten