Skip to main content
Erschienen in: Journal of Material Cycles and Waste Management 2/2018

16.10.2017 | ORIGINAL ARTICLE

Drying characteristics of thickened sewage sludge in oil vacuum evaporation system

verfasst von: Seok-Hwan Kim, Byung-Ran Lim, Soo-Koo Lee

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 2/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In the current work, drying characteristics of thickened sludge was investigated with respect to drying conditions in oil vacuum evaporation system. The drying characteristics were confirmed by measuring the amount of condensate with 1-min interval. Results showed that the type of mixing oil changed thermal characteristics. The evaporation rate and drying efficiencies of waste cooking oil showed better results rather than other refined oils. From the TG and DTA test results, the ignition temperature varied depending on oil type. The ignition temperature of drying sludge with refined oil was lower than that with waste cooking oil and raw sludge. The moisture content of dried sludge mixed with oil was less than 3%, however, the sludge dried without any oil showed much higher moisture content of 53.7%. This study showed that sludge-derived fuel from the newly developed oil vacuum drying process can be widely used as a renewable energy source.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Park KT, Lim BR, Lee SK (2010) Drying characteristics of sewage sludge using vacuum evaporation and frying. J Mater Cycles Waste Manag 12(3):235–239CrossRef Park KT, Lim BR, Lee SK (2010) Drying characteristics of sewage sludge using vacuum evaporation and frying. J Mater Cycles Waste Manag 12(3):235–239CrossRef
2.
Zurück zum Zitat Ohm TI, Chae JS, Kim JE, Kim H, Moon SH (2009) A study on the dewatering of industrial waste sludge by fry-drying technology. J. Hazard Mater 168(1):445–450CrossRef Ohm TI, Chae JS, Kim JE, Kim H, Moon SH (2009) A study on the dewatering of industrial waste sludge by fry-drying technology. J. Hazard Mater 168(1):445–450CrossRef
3.
Zurück zum Zitat Alvis A, Velez C, Rada-Mendoza M, Villamiel M (2009) Heat transfer coefficient during deep-fat frying. Food Control 20(4):321–325CrossRef Alvis A, Velez C, Rada-Mendoza M, Villamiel M (2009) Heat transfer coefficient during deep-fat frying. Food Control 20(4):321–325CrossRef
4.
Zurück zum Zitat Chai LH (2007) Statistical dynamic features of sludge drying systems. Int J Thermal Sci 46(8):802–811CrossRef Chai LH (2007) Statistical dynamic features of sludge drying systems. Int J Thermal Sci 46(8):802–811CrossRef
5.
Zurück zum Zitat Silva DP, Rudolph V, Taranto OP (2005) The drying of sewage sludge by immersion frying. Braz J Chem Eng 22(2):271–276CrossRef Silva DP, Rudolph V, Taranto OP (2005) The drying of sewage sludge by immersion frying. Braz J Chem Eng 22(2):271–276CrossRef
6.
Zurück zum Zitat Garayo J, Moreira R (2002) Vacuum frying of potato chips. J Food Eng 55(2):181–191CrossRef Garayo J, Moreira R (2002) Vacuum frying of potato chips. J Food Eng 55(2):181–191CrossRef
7.
Zurück zum Zitat Magdziarz A, Wilk M (2013) Thermogravimetric study of biomass, sewage sludge and coal combustion. Energy Convers Manag 75:425–430CrossRef Magdziarz A, Wilk M (2013) Thermogravimetric study of biomass, sewage sludge and coal combustion. Energy Convers Manag 75:425–430CrossRef
8.
Zurück zum Zitat Deng WY, Yan JH, Li XD, Zhu XW, Lu SY, Cen KF (2009) Emission characteristics of volatile compounds during sludges drying process. J Hazard Mater 162(1):186–192CrossRef Deng WY, Yan JH, Li XD, Zhu XW, Lu SY, Cen KF (2009) Emission characteristics of volatile compounds during sludges drying process. J Hazard Mater 162(1):186–192CrossRef
9.
Zurück zum Zitat Yasuhara A, Amano Y, Shibamoto T (2010) Investigation of the self-heating and spontaneous ignition of refuse-derived fuel(RDF) during storage. Waste Manag 30(7):1161–1164CrossRef Yasuhara A, Amano Y, Shibamoto T (2010) Investigation of the self-heating and spontaneous ignition of refuse-derived fuel(RDF) during storage. Waste Manag 30(7):1161–1164CrossRef
10.
Zurück zum Zitat Murasawa N, Koseki H, Li XR, Iwata Y (2012) Study on thermal behaviour and risk assessment of biomass fuels. Int J Energy Eng 2(5):242–252CrossRef Murasawa N, Koseki H, Li XR, Iwata Y (2012) Study on thermal behaviour and risk assessment of biomass fuels. Int J Energy Eng 2(5):242–252CrossRef
11.
Zurück zum Zitat Zerlottin M, Refosco D, Della Zassa M, Biasin A, Canu P (2013) Self-heating of dried wastewater sludge. Waste Manag 33(1):129–137CrossRef Zerlottin M, Refosco D, Della Zassa M, Biasin A, Canu P (2013) Self-heating of dried wastewater sludge. Waste Manag 33(1):129–137CrossRef
12.
Zurück zum Zitat Chen W, Mori S, Pan WP (1996) Studying the mechanisms of ignition of coal particles by TG-DTA. Thermochim Acta 275:149–158CrossRef Chen W, Mori S, Pan WP (1996) Studying the mechanisms of ignition of coal particles by TG-DTA. Thermochim Acta 275:149–158CrossRef
Metadaten
Titel
Drying characteristics of thickened sewage sludge in oil vacuum evaporation system
verfasst von
Seok-Hwan Kim
Byung-Ran Lim
Soo-Koo Lee
Publikationsdatum
16.10.2017
Verlag
Springer Japan
Erschienen in
Journal of Material Cycles and Waste Management / Ausgabe 2/2018
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI
https://doi.org/10.1007/s10163-017-0671-8

Weitere Artikel der Ausgabe 2/2018

Journal of Material Cycles and Waste Management 2/2018 Zur Ausgabe