nach oben

Innovative Infrastructure Solutions

Erschienen in:

01.09.2021 | Technical paper

Durability performance and microstructure of binary blended high-performance concrete

verfasst von: Sanjay Kumar, Baboo Rai

Erschienen in: Innovative Infrastructure Solutions | Ausgabe 3/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

High-performance concrete (HPC) is a relatively recent advancement in cementitious composite materials with mechanical and durability properties which far exceed those of conventional concrete. Three different binary blends of HPC mixes utilizing distinctive supplementary cementitious materials at various substitution rates with ordinary Portland cement have been designed and cast to explore the durability performance and microstructure analysis of HPC. The water and chloride transport properties have also been investigated. The phase identification analysis of the cementitious materials has been performed using X-Ray diffractogram. The microstructure evolution of HPC has experimentally been studied by scanning electron microscope. The results revealed that all the mixes were less porous as compared to the control mix and showed “low-range” chloride penetration. An attempt has been made to develop correlation between compressive strength and durability parameters of concrete.

Vorheriger Artikel Modeling the drying shrinkage of structural concretes

Nächster Artikel Evaluating the structural capacity of flexible pavements at the network level using layered elastic analysis

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

ACI Committee 363 (1992) State-of-the-art report on high-strength concrete (ACI 363R-92). ACI J Proc, vol 92

CEB-FIP C (1991) Model code 1990, Com Euro-International Du Beton, Paris, pp 87–109. https://doi.org/10.1680/ceb-fipmc1990.35430

Kumar Mehta P, Burrows RW (2001) Building durable structures in the 21st century. Indian Concr J

Alexander MG, Santhanam M, Ballim Y (2010) Durability design and specification for concrete structures––the way forward. Int J Adv Eng Sci Appl Math. https://doi.org/10.1007/s12572-011-0027-xCrossRef

Alkaysi M, El-Tawil S, Liu Z, Hansen W (2016) Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC). Cem Concr Compos. https://doi.org/10.1016/j.cemconcomp.2015.11.005CrossRef

Wu Z, Khayat KH, Shi C (2019) Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2019.105786CrossRef

Abdulkareem OM, Fraj B, Bouasker M, Khelidj A (2017) Mechanical and durability properties of environmentally friendly UHCPC AFGC-ACI-Fib-RILEM. Int Symp Ultra High Perform Fibre Reinforced Concr

A.M. W. Gildas Cédric DOUAMBA, Abdou LAWANE, Latifou BELLO, Effect of metakaolin as partial substitution to Portland cement on the mechanical and durability properties of high performance concrete. Am J Civ Eng. ArchitA (2018). https://doi.org/https://doi.org/10.12691/ajcea-6-6-4.

Shen D, Liu K, Wen C, Shen Y, Jiang G (2019) Early-age cracking resistance of ground granulated blast furnace slag concrete. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2019.06.028CrossRef

10.

Li J, Wu Z, Shi C, Yuan Q, Zhang Z (2020) Durability of ultra-high performance concrete—A review. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.119296CrossRef

11.

M.I. Khan, R. Siddique, A. Mardani-Aghabaglou, G. Inan Sezer, K. Ramyar, M. Cyr, M. Trinh, B. Husson, G. Casaux-Ginestet, A. Borosnyói, D.M. Roy, P. Arjunan, M.R. Silsbee, H.S. Wong, H.A. Razak, Effect of cement type on metakaolin efficiency, Cem. Concr. Res. 57 (2014) 30–35. https://doi.org/https://doi.org/10.1016/j.resconrec.2011.09.016.

12.

Du H, Du S, Liu X (2014) Durability performances of concrete with nano-silica. Constr Build Mater 73:705–712. https://doi.org/10.1016/j.conbuildmat.2014.10.014CrossRef

13.

Khan MI, Siddique R (2011) Utilization of silica fume in concrete: Review of durability properties. Resour Conserv Recycl 57:30–35. https://doi.org/10.1016/j.resconrec.2011.09.016CrossRef

14.

Dobias D, Pernicova R, Mandlik T (2016) Water transport properties and depth of chloride penetration in ultra high performance concrete. Key Eng Mater.

15.

Li LG, Zhu J, Huang ZH, Kwan AKH, Li LJ (2017) Combined effects of micro-silica and nano-silica on durability of mortar. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2017.09.105CrossRef

16.

Wu K, Shi H, Xu L, Ye G, De Schutter G (2016) Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2015.09.018CrossRef

17.

Cyr M, Trinh M, Husson B, Casaux-Ginestet G (2014) Effect of cement type on metakaolin efficiency. Cem Concr Res 64:63–72. https://doi.org/10.1016/j.cemconres.2014.06.007CrossRef

18.

Wong HS, Razak HA (2005) Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance. Cem Concr Res 35:696–702. https://doi.org/10.1016/j.cemconres.2004.05.051CrossRef

19.

Wang XY (2014) Effect of fly ash on properties evolution of cement based materials. Constr Build Mater 69:32–40. https://doi.org/10.1016/j.conbuildmat.2014.07.029CrossRef

20.

Borosnyói A (2016) Long term durability performance and mechanical properties of high performance concretes with combined use of supplementary cementing materials. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2016.02.224CrossRef

21.

Kumar S, Rai B (2018) A review on wider application of supplementary cementitious materials on the development of high-performance concrete. Int J Civ Eng Technol 9:187–204

22.

Neville A, Aïtcin P-C (1998) High performance concrete—an overview. Mater Struct 31:111–117. https://doi.org/10.1007/BF02486473CrossRef

23.

Aïtcin PC, High-performance concrete, 1998.

24.

Aitcin PC, Neville A, Acker P (1997) Integrated view of shrinkage deformation. Concr Int 19: 35–41. https://www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&ID=68.

25.

Hassan KE, Cabrera JG, Maliehe RS (2000) Effect of mineral admixtures on the properties of high-performance concrete. Cem Concr Compos 22:267–271. https://doi.org/10.1016/S0958-9465(00)00031-7CrossRef

26.

Langan BW, Weng K, Ward MA (2002) Effect of silica fume and fly ash on heat of hydration of Portland cement. Cem Concr Res. https://doi.org/10.1016/S0008-8846(02)00742-1CrossRef

27.

A.C. E-701 (2001) Cementitious materials for concrete. ACI Educ Bull, pp E3–01

28.

ACI Committee 209 (2005) Report on factors affecting shrinkage and creep of hardened concrete, Am Concr Inst

29.

Malhotra VM, Zhang M, Read PH, Ryell J (2000) Long-term mechanical properties and durability characteristics of high-strength/high performance concrete incorporating supplementary cementing materials under outdoor exposure conditions. ACI Mater J 97:518–525

30.

Li G, Zhao X (2003) Properties of concrete incorporating fly ash and ground granulated blast-furnace slag. Cem Concr Compos. https://doi.org/10.1016/S0958-9465(02)00058-6CrossRef

31.

Neville AM (1996) Properties of concrete. In: 4th Final Ed. Wiley, New York

32.

ACI Committee 211 (2013) Standard practice for selecting proportions for normal heavyweight, and mass concrete, ACI 211.1-91 (Reapproved 2009), In: Man Concr Pract

33.

ACI211 (1998) Guide for Selecting proportions for high-strength concrete with Portland cement and fly ash, ACI 211.4R-93

34.

Duval R, Kadri EH (1998) Influence of silica fume on the workability and the compressive strength of high-performance concretes. Cem Concr Res 28:533–547. https://doi.org/10.1016/S0008-8846(98)00010-6CrossRef

35.

Banthia N, Mindess S (1989) Water permeability of cement paste. Cem Concr Res 19:727–736. https://doi.org/10.1016/0008-8846(89)90043-4CrossRef

36.

Yu R, Spiesz P, Brouwers HJH (2014) Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cem Concr Res. https://doi.org/10.1016/j.cemconres.2013.11.002CrossRef

37.

Lee T, Lee J (2020) Setting time and compressive strength prediction model of concrete by nondestructive ultrasonic pulse velocity testing at early age. Constr Build Mater 252:119027. https://doi.org/10.1016/j.conbuildmat.2020.119027CrossRef

38.

Alaskar A, Hooton D (2016) The effect of ground granulated blast furnace slag and silica fume on the durability of high performance concrete in bridge decks. Proc Annu Conf Can Soc Civ Eng

39.

Wiciak P, Cascante G, Polak MA (2020) Frequency and geometry effects on ultrasonic pulse velocity measurements of concrete specimens. ACI Mater J. Doi: https://doi.org/10.14359/51722399.

40.

Sabbağ N, Uyanık O (2017) Prediction of reinforced concrete strength by ultrasonic velocities. J Appl Geophys. https://doi.org/10.1016/j.jappgeo.2017.04.005CrossRef

41.

Pal P (2019) Dynamic Poisson’s ratio and modulus of elasticity of pozzolana Portland cement concrete. Int J Eng Technol Innov

42.

Bhalla N, Sharma S, Sharma S, Siddique R (2018) Monitoring early-age setting of silica fume concrete using wave propagation techniques. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2017.12.032CrossRef

43.

Benyahia KA, Ghrici M, Kenai S, Breysse D, Sbartai ZM (2017) Analysis of the relationship between nondestructive and destructive testing of low concrete strength in new structures. Asian J Civ Eng 18:191–205

44.

Y. Lin, S.F. Kuo, C. Hsiao, C.P. Lai, Investigation of pulse velocity-strength relationship of hardened concrete. ACI Mater J (2007). https://doi.org/https://doi.org/10.14359/18823.

45.

Yoon H, Kim Y, Kim HS, Kang JW, Koh HM (2017) Evaluation of early-age concrete compressive strength with ultrasonic sensors. Sensors (Switzerland). https://doi.org/10.3390/s17081817CrossRef

46.

Ye G, Lura P, Van Breugel K, Fraaij ALA (2004) Study on the development of the microstructure in cement-based materials by means of numerical simulation and ultrasonic pulse velocity measurement. Cem Concr Compos. https://doi.org/10.1016/S0958-9465(03)00081-7CrossRef

47.

IS 4031:1996 (Part1to15) (1996) Ed. Various laboratory tests of cement. Bureau of Indian Standards, n.d.

48.

IS 3812:1981 (1981) Ed. Specifications for fly—ash for use as pozzolana and admixture. Bureau of Indian Standards, n.d.

49.

IS:15388 (2003) Specifications for silica fume. Bur Indian Stand. New Delhi, India

50.

Bureau of Indian Standard(BIS) (1959) IS 1199–1959: methods of sampling and analysis of concrete. Bur Indian Stand. Delhi

51.

IS: 516 (1959) Method of test for strength of concrete. Bur Indian Stand. New Delhi

52.

IS 13311 (Part 1) (1992) Non-destructive testing of concrete—methods of test. Bur Indian Satandards, pp 1–7.

53.

Bureau of Indian Standard(BIS) (1965) IS:3085–196, Method of test for permeability of cement mortar and concrete

54.

ASTM C1202 (2012) Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. Am. Soc Test Mater, pp 1–8. Doi: https://doi.org/10.1520/C1202-12.2.

55.

Kovler K, Roussel N (2011) Properties of fresh and hardened concrete. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2011.03.009CrossRef

56.

Astm C989–04 (2004) Standard specification for ground granulated blast-furnace slag for use in concrete. Annu B ASTM Stand

57.

Ganesh Babu K, Sree Rama Kumar V (2000) Efficiency of GGBS in concrete. Cem Concr Res 30: 1031–1036. Doi: https://doi.org/10.1016/S0008-8846(00)00271-4.

58.

Bilim C, Atiş CD, Tanyildizi H, Karahan O (2009) Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network. Adv Eng Softw. https://doi.org/10.1016/j.advengsoft.2008.05.005CrossRef

59.

Chidiac SE, Panesar DK (2008) Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days. Cem Concr Compos. https://doi.org/10.1016/j.cemconcomp.2007.09.003CrossRef

60.

Bentz DP (2006) Influence of water-to-cement ratio on hydration kinetics: simple models based on spatial considerations. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2005.04.014CrossRef

61.

IS 10262 (2009) Ed. Indian standards recommended guidelines for concrete mix design, 2009th ed. Bureau of Indian Standards, n.d.

62.

Wang Q, Feng J, Yan P (2012) The microstructure of 4-year-old hardened cement-fly ash paste. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2011.08.088CrossRef

63.

Papadakis VG (1999) Effect of fly ash on Portland cement systems: part I. low-calcium fly ash. Cem Concr Res 29:1727–1736. https://doi.org/10.1016/S0008-8846(99)00153-2CrossRef

64.

Papadakis VG, Pedersen EJ, Lindgreen H (1999) AFM-SEM investigation of the effect of silica fume and fly ash on cement paste microstructure. J Mater Sci. https://doi.org/10.1023/A:1004500324744CrossRef

65.

Papadakis S, Tsimas VG (2002) Supplementary cementing materials in concrete part I: efficiency and design. Cem Concr Res 3:1525–1532. https://doi.org/10.1016/S0008-8846(02)00827-XCrossRef

66.

Elsen J (2006) Microscopy of historic mortars-a review. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2005.12.006CrossRef

67.

Khan MN, Singla S, Garg R, Garg R (2020) Effect of Microsilica on Strength and Microstructure of the GGBS-based Cement composites. IOP Conf Ser Mater Sci Eng. https://doi.org/10.1088/1757-899X/961/1/012007CrossRef

68.

Abstract of: Guide for the Use of Silica Fume in Concrete (ACI 234R). ACI Mater J (1995). Doi: https://doi.org/10.14359/978.

69.

Gedam BA, Bhandari NM, Upadhyay A (2016) Influence of supplementary cementitious materials on shrinkage, creep, and durability of high-performance concrete. J Mater Civ Eng 28:1–11. https://doi.org/10.1061/(asce)mt.1943-5533.0001462CrossRef

70.

Diamond S (2004) The microstructure of cement paste and concrete-a visual primer. Cem Concr Compos 26: 919–933. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2004.02.028.

71.

Baert G, Hoste S, De Schutter G, De Belie N (2008) Reactivity of fly ash in cement paste studied by means of thermogravimetry and isothermal calorimetry. J Therm Anal Calorim 94:485–492. https://doi.org/10.1007/s10973-007-8787-zCrossRef

72.

Liu J, Xing F, Dong B, Ma H, Pan D (2014) Study on water sorptivity of the surface layer of concrete. Mater Struct Constr. https://doi.org/10.1617/s11527-013-0162-xCrossRef

73.

Ma H (2013) Multi-scale modeling of the microstructure and transport properties of contemporary concrete. The Hong Kong University of Science and Technology, Hong KongCrossRef

74.

Zhang Y, Sun W, Liu S (2002) Study on the hydration heat of binder paste in high-performance concrete. Cem Concr Res. https://doi.org/10.1016/S0008-8846(02)00810-4CrossRef

75.

Mobasher B, Shekarchi M, Bonakdar A, Bakhshi M, Mirdamadi A (2010) Transport properties in metakaolin blended concrete. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2010.04.035CrossRef

76.

Demirboǧa R, Türkmen I, Karakoç MB (2004) Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete. Cem Concr Res 34:2329–2336. https://doi.org/10.1016/j.cemconres.2004.04.017CrossRef

77.

Türkmen I, Öz A, Aydin AC (2010) Characteristics of workability, strength, and ultrasonic pulse velocity of SCC containing zeolite and slag. Sci Res Essays 5:2055–2064

78.

Khatib JM (2008) Performance of self-compacting concrete containing fly ash. Constr Build Mater 22:1963–1971. https://doi.org/10.1016/j.conbuildmat.2007.07.011CrossRef

79.

Shariq M, Prasad J, Masood A (2013) Studies in ultrasonic pulse velocity of concrete containing GGBFS. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2012.11.070CrossRef

80.

Owaid HM, Hamid R, Taha MR (2014) Strength - Ultrasonic pulse velocity relationship of thermally activated alum sludge multiple blended high performance concretes. Key Eng Mater.

81.

Uysal M, Yilmaz K, Ipek M (2012) The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete. Constr Build Mater 27:263–270.CrossRef

82.

Gavela S, Nikoloutsopoulos N, Papadakos G, Sotiropoulou A (2020) Combination of compressive strength test and ultrasonic pulse velocity test with acceptable uncertainty. Mater Des Process Commun. https://doi.org/10.1002/mdp2.171CrossRef

83.

Mohamed OA (2019) Effect of mix constituents and curing conditions on compressive strength of sustainable self-consolidating concrete. Sustain, pp 11. Doi: https://doi.org/10.3390/su1102094.

Titel: Durability performance and microstructure of binary blended high-performance concrete
verfasst von: Sanjay Kumar
Baboo Rai
Publikationsdatum: 01.09.2021
Verlag: Springer International Publishing
Erschienen in: Innovative Infrastructure Solutions / Ausgabe 3/2021
Print ISSN: 2364-4176
Elektronische ISSN: 2364-4184
DOI: https://doi.org/10.1007/s41062-021-00525-w

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 3/2021

Permeability investigation on sand treated using enzyme-induced carbonate precipitation and biopolymers

Evaluation of dynamic behavior of single floating piles embedded in soft clay layer under lateral harmonic and impulse loading

Rutting and moisture-induced damage potential of foamed warm mix asphalt (WMA) containing RAP

Effect of metakaolin developed from natural material Soorh on fresh and hardened properties of self-compacting concrete

Effects of ground motion spectral shapes on the design of seismic base isolation for multi-story building according to Eurocode 8

Lateral response enhancement of a conventional offshore monopile using skirts of helical piles and pipe piles with stiffeners