nach oben

Journal of Materials Science

Erschienen in:

01.02.2024 | Chemical routes to materials

Effect of catalyst type on the type and size of nano-diamond synthesized by chlorine gas etching of Ti₃C₂ MXene under ambient pressure

verfasst von: Zhao Zhang, Huaxin Ma, Jingjie Zhang, Shuo Li, Ruijun Zhang

Erschienen in: Journal of Materials Science | Ausgabe 7/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Recently, we have successfully achieved the atmospheric pressure catalytic synthesis of nanodiamonds by applying high stress to Ti₃C₂/Ni composite and then performing chlorine gas etching at atmospheric pressure. In this work, we chose three different catalysts (Fe, Co and Ni), with Ti₃C₂ as the precursor, aiming to investigate the effect of catalyst type on the synthesis of NDs. The results show that all three catalysts can catalyze the synthesis of NDs and that the crystal type and plasticity of the catalysts may have an important effect on the type and size of the resulting ND. When Fe and Ni were used as catalysts, the percentage of C-type NDs obtained was higher than that of C-type NDs catalyzed by Co (hexagonal close-packed crystal structure) due to its face-centered cubic crystal structure. In contrast, more H-type NDs were catalytically synthesized when Co (hexagonal close-packed crystal structure) was used as the catalyst. In addition, the number of small-size NDs (< 10 nm) catalytically synthesized by Co was significantly more than that catalytically synthesized by Fe and Ni, this may be caused by the poor plasticity of Co with a hexagonal close-packed crystal structure compared to Fe and Ni with a face-centered cubic crystal structure.

Vorheriger Artikel Capacitors and catalyst supports based on pyrolytic carbon deposited on metals/metal oxides derived from hydrotalcite-like materials

Nächster Artikel Efficient construction of Al/F microspheres in Pickering emulsion to regulate combustion reactivity

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Kossovsky N, Gelman A, Hnatyszyn HJ, Rajguru S, Garrell RL, Torbati S, Freitas SSF, Chow GM (1995) Surface-modified diamond nanoparticles as antigen delivery vehicles. Bioconjugate Chem 6:507–511. https://doi.org/10.1021/bc00035a001CrossRef

Chkhalov NI, Fedorchenko MV, Kruglyakov EP, Volokhov AI, Baraboshkin KS, Komarov VF, Kostyukov SI, Petrov EA (1995) Ultradispersed diamond powders of detonation nature for polishing X-ray mirrors. Nucl Instrum Methods Phys Res Sect A 359:155–156. https://doi.org/10.1016/0168-9002(94)01387-XCrossRefADS

Irifune T, Kurio A, Sakamoto S, Inoue T, Sumiya H (2003) Ultrahard polycrystalline diamond from graphite. Nature 421:599–600. https://doi.org/10.1038/421599bCrossRefPubMedADS

Mochalin VN, Shenderova O, Ho D, Gogotsi Y (2012) The properties and applications of nanodiamonds. Nat Nanotechnol 7:11–23. https://doi.org/10.1038/nnano.2011.209CrossRefADS

Greiner NR, Phillips DS, Johnson JD, Volk F (1988) Diamonds in detonation soot. Nature 333:440–442. https://doi.org/10.1038/333440a0CrossRefADS

Thiel MV, Ree FH (1987) Properties of carbon clusters in TNT detonation products: graphite-diamond transition. J Appl Phys 62:1761–1767. https://doi.org/10.1063/1.339575CrossRefADS

Hirai H, Kondo K (1991) Modified phases of diamond formed under shock compression and rapid quenching. Science 253:772–774. https://doi.org/10.1126/science.253.5021.7CrossRefPubMedADS

Vlasov II, Shenderova OA (2014) Detonation nanodiamonds: science and applications. Pan Stanford, Boca Raton. https://doi.org/10.1201/b15541CrossRef

Boudou JP, Curmi PA, Jelezko F, Wrachtrup J, Aubert P, Sennour M, Balasubramanian G, Reuter R, Thorel A, Gaffet E (2009) High yield fabrication of fluorescent nanodiamonds. Nanotechnology 20:235602. https://doi.org/10.1088/0957-4484/20/23/235602CrossRefPubMedPubMedCentralADS

10.

Banhart F, Ajayan PM (1996) Carbon onions as nanoscopic pressure cells for diamond formation. Nature 382:433–435. https://doi.org/10.1038/382433a0CrossRefADS

11.

Xiao J, Li JL, Liu P, Yang GW (2014) A new phase transformation path from nanodiamond to new-diamond via an intermediate carbon onion. Nanoscale 6:15098–15106. https://doi.org/10.1039/c4nr05246cCrossRefPubMedADS

12.

Kumar A, Lin PA, Xue A, Hao BY, Yap YK, Sankaran RM (2013) Formation of nanodiamonds at near-ambient conditions via microplasma dissociation of ethanol vapour. Nat Commun 4:2618. https://doi.org/10.1038/ncomms3618CrossRefPubMedADS

13.

Kamali AR, Fray DJ (2015) Preparation of nanodiamonds from carbon nanoparticles at atmospheric pressure. Chem Commun 51:5594–5597. https://doi.org/10.1039/c5cc00233hCrossRef

14.

Hemawan KW, Gou H, Hemley RJ (2015) Diamond synthesis at atmospheric pressure by microwave capillary plasma chemical vapor deposition. Appl Phys Lett 107:181901. https://doi.org/10.1063/1.4934751CrossRefADS

15.

Manjarrez A, Zhou K, Chen CQ, Tzeng YK, Cai LL (2022) Atmospheric-pressure flame vapor deposition of nanocrystalline diamonds: implications for scalable and cost-effective coatings. ACS Appl Nano Mater 5:10715–10723. https://doi.org/10.1021/acsanm.2c02059CrossRef

16.

Zhang W, Fan B, Zhang Y, Fan J (2017) Hydrothermal synthesis of well crystallized C8and diamond nanocrystals and pH-controlled C8↔ diamond phase transition. CrystEngComm 19:1248–1252. https://doi.org/10.1039/c6ce02635dCrossRef

17.

Chmiola J, Yushin G, Dash R, Gogotsi Y (2006) Effect of pore size and surface area of carbide derived carbons on specific capacitance. J Power Sources 158:765–772. https://doi.org/10.1016/j.jpowsour.2005.09.008CrossRef

18.

Presser V, Heon M, Gogotsi Y (2011) Carbide-derived carbons–from porous networks to nanotubes and graphene. Adv Funct Mater 21:810–833. https://doi.org/10.1002/adfm.201002094CrossRef

19.

Tallo I, Thomberg T, Kontturi K, Jänes A, Lust E (2011) Nanostructured carbide-derived carbon synthesized by chlorination of tungsten carbide. Carbon 49:4427–4433. https://doi.org/10.1016/j.carbon.2011.06.033CrossRef

20.

Dutzer MR, Mangarella MC, Schott JA, Dai S, Walton KS (2017) The effects of reactor design on the synthesis of titanium carbide-derived carbon. Chem Eng Sci 160:191–199. https://doi.org/10.1016/j.ces.2016.11.019CrossRef

21.

Tomas CD, Suarez-Martinez I, Vallejos-Burgos F, López MJ, Kaneko K, Marks NA (2017) Structural prediction of graphitization and porosity in carbide-derived carbons. Carbon 119:1–9. https://doi.org/10.1016/j.carbon.2017.04.004CrossRef

22.

Peng B, Zhang Y, Wang GH, Yuan L, Jia R (2018) Ferromagnetism observed in silicon-carbide-derived carbon. Phys Rev B 97:054401. https://doi.org/10.1103/PhysRevB.97.054401CrossRefADS

23.

Yushin GN, Hoffman EN, Nikitin A, Ye H, Barsoum MW, Gogotsi Y (2005) Synthesis of nanoporous carbide-derived carbon by chlorination of titanium silicon carbide. Carbon 43:2075–2082. https://doi.org/10.1016/j.carbon.2005.03.014CrossRef

24.

Urbonaite S, Juárez-Galán JM, Leis J, Rodríguez-Reinoso F, Svensson G (2008) Porosity development along the synthesis of carbons from metal carbides. Microporous Mesoporous Mater 113:14–21. https://doi.org/10.1016/j.micromeso.2007.10.046CrossRef

25.

González-García P, Urones-Garrote E, Ávila-Brande D, Gómez-Herrero A, Otero-Díaz LC (2010) Structural study of carbon nanomaterials prepared by chlorination of tungsten carbide and bis(cyclopentadienyl)tungsten dichloride. Carbon 48:3667–3675. https://doi.org/10.1016/j.carbon.2010.06.003CrossRef

26.

Sui J, Lu JJ (2010) Synthesis of carbon nitride powder by selective etching of TiC_0.3N_0.7 in chlorine-containing atmosphere at moderate temperature. Mater Chem Phys 123:264–268. https://doi.org/10.1016/j.matchemphys.2010.04.008CrossRef

27.

Zhang Z, Ma HX, Zhang JJ, Li S, Zhang RJ (2023) Nickel-catalyzed synthesis of nano-diamonds during the high-temperature chlorination of the layered structured bulk of Ti₃C₂ under atmospheric pressure. Diam Relat Mater 137:110128. https://doi.org/10.1016/j.diamond.2023.110128CrossRefADS

28.

Bundy FP, Hall HT, Strong HM, Wentorfjun RH (1995) Man-made diamonds. Nature 176:51–55. https://doi.org/10.1038/176051a0CrossRefADS

29.

Huang M, Tang MQ, Luo XY (2005) Research and development of powder materials for industrial diamond. Powder Metall Ind 15:33–39

30.

Ma Y, Zou G, Yang H, Meng J (1994) Conversion of fullerenes to diamond under high pressure and high temperature. Appl Phys Lett 65:822–823. https://doi.org/10.1063/1.112242CrossRefADS

31.

Cao LM, Gao CX, Sun HP, Zou GT, Zhang Z, Zhang XY, He M, Zhang M, Li YC, Zhang J, Dai DY, Sun LL, Wang WK (2001) Synthesis of diamond from carbon nanotubes under high pressure and high temperature. Carbon 39:311–314CrossRef

32.

Sung CM, Tai MF (1997) Reactivities of transition metals with carbon: implications to the mechanism of diamond synthesis under high pressure. Int J Refract Metal Hard Mater 15:237–256. https://doi.org/10.1016/S0263-4368(97)00003-6CrossRef

33.

Li Y, Shao H, Lin Z, Lu J, Liu L, Duployer B, Persson POA, Eklund P, Hultman L, Li M, Chen K, Zha XH, Du S, Rozier P, Chai Z, Raymundo-Pinero E, Taberna PL, Simon P, Huang Q (2020) A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte. Nat Mater 19:894–899. https://doi.org/10.1038/s41563-020-0657-0CrossRefPubMedADS

34.

Naguib M, Kurtoglu M, Presser V, Lu J, Niu J, Heon M, Hultman L, Gogotsi Y, Barsoum MW (2011) Two-dimensional nanocrystals produced by exfoliation of Ti₃AlC₂. Adv Mater 23:4248–4253. https://doi.org/10.1002/adma.201102306CrossRefPubMed

35.

Luo R, Li R, Jiang C, Qi R, Liu M, Luo C, Lin H, Huang R, Peng H (2021) Facile synthesis of cobalt modified 2D titanium carbide with enhanced hydrogen evolution performance in alkaline media. Int J Hydrog Energy 46:32536–32545. https://doi.org/10.1016/j.ijhydene.2021.07.110CrossRef

36.

Jiang H, Gong Q, Peterlechner M (2023) Microstructure analysis of a CoCrFeNi high-entropy alloy after compressive deformation. Mater Sci Eng 888:145785. https://doi.org/10.1016/j.msea.2023.145785CrossRef

37.

Nath D, Singh F, Das R (2020) X-ray diffraction analysis by Williamson-Hall, Halder-Wagner and size-strain plot methods of CdSe nanoparticles-a comparative study. Mater Chem Phys 239:122021. https://doi.org/10.1016/j.matchemphys.2019.122021CrossRef

38.

Takaki S, Masumura T, Tsuchiyama T (2018) Proposal of simplified modified Williamson-Hall equation. isij Int 58:2354–2356. https://doi.org/10.2355/isijinternational.ISIJINT-2018-517CrossRef

39.

Tan QY, Yu ZX, Xiang QC, He ND, Long RX, Wang J (2023) Photo-Fenton properties of MIL-88A (Fe)/Ti₃C₂ MXene with tunable active crystal facets: universal for degradation of common pollutants in wastewater. Process Saf Environ Prot 179:405–420. https://doi.org/10.1016/j.psep.2023.09.020CrossRef

40.

Peng YH, Zhang Y, Deng LW, Zhang P, Liu YW, Zeng B, Gao XH, Huang SX (2023) Electrostatic self-assembly of Ti₃C₂T_x/Fe nanochain hybrids for efficient microwave absorber. J Magn Magn Mater 570:170536. https://doi.org/10.1016/j.jmmm.2023.170536CrossRef

41.

Li N, Xie X, Lu HX, Fan BB, Wang XH, Zhao B, Zhang R, Yang R (2019) Novel two-dimensional Ti₃C₂T_x/Ni-spheres hybrids with enhanced microwave absorption properties. Ceram Int 45:22880–22888. https://doi.org/10.1016/j.ceramint.2019.07.331CrossRef

42.

Wen CY, Zhu TJ, Li XY, Li HF, Huang XQ, Sun GB (2020) Nanostructured Ni/Ti₃C₂T_x MXene hybrid as cathode for lithium-oxygen battery. Chin Chem Lett 31:1000–1003. https://doi.org/10.1016/j.cclet.2019.09.028CrossRef

43.

Gogotsi Y, Welz S, Ersoy DA, McNallan MJ (2001) Conversion of silicon carbide to crystalline diamond-structured carbon at ambient pressure. Nature 411:283–287. https://doi.org/10.1038/35077031CrossRefPubMedADS

44.

Gupta SK, Tripathy SP, Bharti D, Pal SK, Verma S, Pal S-K, Ray SS (2023) One pot synthesis of phosphate glass with in situ formed nanodiamonds from adenosine triphosphate for bone repair. Ceram Int 49:22537–22546. https://doi.org/10.1016/j.ceramint.2023.04.089CrossRef

45.

Han SJ, Seo M, Cho MG, Kwon YW, Lim SH, Han SH (2021) Sub-5 nm nanodiamonds fabricated by plasma immersion ion implantation as fluorescent probes. ACS Appl Nano Mater 4:2238–2246. https://doi.org/10.1021/acsanm.1c00038CrossRef

46.

Frenklach M, Kematick R, Huang D, Howard W, Spear KE, Phelps AW, Koba R (1989) Homogeneous nucleation of diamond powder in the gas phase. J Appl Phys 66:395–399. https://doi.org/10.1063/1.343890CrossRefADS

47.

Sharma AK, Salunke HG, Das GP, Ayyub P, Multani MS (1996) Electronic structure of the 4H polytype of diamond. J Phys Condens Matter 8:5801–5809. https://doi.org/10.1088/0953-8984/8/31/013CrossRefADS

48.

Wang JB, Zhang CY, Zhong XL, Yang GW (2002) Cubic and hexagonal structures of diamond nanocrystals formed upon pulsed laser induced liquid–solid interfacial reaction. Chem Phys Lett 361:86–90. https://doi.org/10.1016/S0009-2614(02)00871-0CrossRefADS

Titel: Effect of catalyst type on the type and size of nano-diamond synthesized by chlorine gas etching of Ti3C2 MXene under ambient pressure
verfasst von: Zhao Zhang
Huaxin Ma
Jingjie Zhang
Shuo Li
Ruijun Zhang
Publikationsdatum: 01.02.2024
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 7/2024
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-024-09363-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2024

Optimizing dielectric energy storage properties of BNT-based relaxor ferroelectric ceramics modified via Ba0.4Sr0.6TiO3

Influence of laser powder bed fusion process on microstructures and low cycle fatigue performance of Invar 36 alloy

Capacitors and catalyst supports based on pyrolytic carbon deposited on metals/metal oxides derived from hydrotalcite-like materials

Characterization of dislocations induced by Vickers indentation in GaN for explaining size ratios of dislocation patterns

Effect of Zr content on microstructure and performance of polycrystalline SiC fiber

Zn doping for enhanced sodium-ion conductivity and air stability in Na3SbS4 solid electrolyte

Premium Partner

Marktübersichten