nach oben

European Journal of Wood and Wood Products

Erschienen in:

28.01.2017 | Original

Effect of incising on the long-term biodeterioration resistance of alkaline copper quaternary (ACQ) treated wood

verfasst von: Sung-Jun Pang, Jung-Kwon Oh, Jung-Pyo Hong, Sang-Joon Lee, Jun-Jae Lee

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 5/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this study was to investigate whether making incising for injecting alkaline copper quaternary (ACQ) into wood extends the wood’s biodeterioration resistance. The biodeterioration resistance was checked by comparing long-term residual ACQ in wood with a toxic threshold to fungi. The residual ACQ in wood was estimated by leaching ratios and a long-term emission model which was derived by leaching tests of full-sized ACQ treated wood. The initial retention and the amount of ACQ leached of incised specimens were higher than those of non-incised specimens. However, the initial retention had a larger impact on leaching ratio than amount of ACQ leached. As a result, the leaching ratios of incised specimens were lower than those of non-incised specimens. The results indicate that incised wood can be expected to have the biodeterioration resistance for a longer period of time than non-incised wood.

Vorheriger Artikel Bonding of densified beech wood using adhesives based on thermally modified soy proteins

Nächster Artikel Factors influencing the processing and technological properties of laminates based on phenolic resin impregnated papers

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Archer K, Nicholas DD, Schultz TP (1995) Screening of wood preservatives: comparison of the soil-block, agar-block, and agar-plate tests. Forest Prod J 45:86–89

AWPA (2009a) A3-08 Standard method for determining penetration of preservatives and fire retardants. American Wood Protection Association, Birmingham

AWPA (2009b) A9-08 Standard method for analysis of treated wood and treating solutions by X-ray spectroscopy. American Wood Protection Association, Birmingham

Baines EF, Saur JM (1985) Preservative treatment of spruce and other refractory wood. Proc of Am Wood Preservers Assoc Conf 81:136–147

British Standard (BS) 8417 (2011) Preservation of wood. Code of Practice. British Standard online at techindex.co.uk. British Standard Institution

Brooks KM (1996) Evaluating the environmental risks associated with the use of chromated copper arsenate-treated wood products in aquatic environments. Estuaries 19(2A):296–305CrossRef

Brooks KM (1997a) Literature review and assessment of the environmental risks associated with the use of ACZA treated wood products in aquatic environments. 2nd edn. Prepared for the Western Wood Preservers’ Institute, Vancouver

Brooks KM (1997b) Literature review, computer model and assessment of the potential environmental risks associated with creosote treated wood products used in aquatic environments. 3rd edn. Prepared for the Western Wood Preservers’ Institute, Vancouver

Brooks KM (1997c) Literature review and assessment of the environmental risks associated with the use of CCA treated wood products in aquatic environments. 3rd edition. Prepared for the Western Wood Preservers’ Institute, Vancouver

Brooks KM (1998a) Literature review and assessment of the environmental risks associated with the use of ACQ treated wood products in aquatic environments. Prepared for the Western Wood Preservers Institute, Vancouver

Brooks KM (1998b) Literature review and assessment of the environmental risks associated with the use pentachlorophenol treated wood products in aquatic environments. Prepared for Western Wood Preservers Institute, Vancouver

Brooks KM (2000a) Assessment of the environmental effects associated with wooden bridges preserved with creosote, copper naphthenate or chromated copper arsenate. Res. Pap. FPL-RP-587. US Department of Agriculture, Madison (Forest Service, Forest Products Laboratory)

Brooks KM (2000b) Environmental impact of preservative-treated wood in a wetland boardwalk. Res. Pap. FPL-RP-582. US Department of Agriculture, Madison (Forest Service, Forest Products Laboratory)

Brooks KM (2002) Copper loss from copper naphthenate treated piling immersed in freshwater. Technical report produced for Merichem Company Research Center, Houston

Cooper PA (1973) Effect of species, precompression, and seasoning on heartwood preservative treatability of six western conifers. Forest Prod J 13:51–59

Cooper PA, Ross NA (1977) Treatability of western hemlock lumber from coastal and interior British Columbia regions with waterborne preservatives. Forest Prod J 27:36–39

Cooper PA, Ung YT (2003) Comparison of stabilization and leaching of CCA and ACQ treated lumber. Proc Canad Wood Preserv Assoc 24:177–185

Fleuren RHLJ (2006) Proposal for the interpretation of leaching study data for wood preservatives (biocides), RIVM report 601516014: 69–89

Freeman MH, Crawford D, Lebow P, Brient JA (2005) A comparison of wood preservatives in posts in southern Mississippi: results from a half-decade of testing. In: Proceedings, 101st conference. American Wood-Preservers’ Association, New Orleans La, May 15–17: 136∼143

Gjovik LE, Schumann DR (1992) Treatability of native softwood species of the northeastern United States. Res. Pap. FPL-RP-508. USDA Forest Serv., Forest Prod. Lab., Madison, WI

Hattori N (1995) Laser processing of wood. Mokuzai Gakkaishi 41:703–709

Hernandez R, Winandy JE (2005) Evaluation of a reduced section modulus model for determining effects of incising on bending strength and stiffness of structural lumber. Forest Prod J 55:77–83

Hingston JA (2002) Leaching of copper based preservatives in aquatic environments. Ph. D. Thesis. Faculty of Life Sciences, University of London, London, UK

Homan WJ, van Oosten AL (1999) Statistically stable models for determination of PEC. Int. Res. Group on Wood Preservation, Doc. IRG/WP, 99–50135

ICH Q2B Validation of Analytical Procedures (1996) Methodology (International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use), Geneva, Switzerland

Islam MN, Ando K, Yamuchi H, Kobayashi Y, Hattori N (2007) Passive impregnation of liquid in impermeable lumber incised by laser. J Wood Sci 53:436–441CrossRef

Islam MN, Ando K, Yamuchi H, Kobayashi Y, Hattori N (2008) Comparative study between full cell and passive impregnation method of wood preservation for laser incised Doulas fir lumber. Wood Sci Technol 42:343–350CrossRef

Kang SM, Park YS, Cho MW, Kim SK (2007a) Developing analytical methods for determination of quaternary ammonium compounds (DDAC) using HPLC-MS (application to treating solution and preservatives treated wood). Proceedings of the Korean society of wood science and technology annual meeting:85–86

Kang SM, Cho MW, Kim GH, Koo JA (2007b) Determination of quaternary ammonium compounds (DBAC, DDAC) using HPLC (application to treating solution, treated wood and leacheate). 2007 proceedings of the Korean society of wood science and technology annual meeting:263–264

Lebow S (1996) Leaching of wood preservative components and their mobility in the environment. Summary of pertinent literature. Gen. Tech. Rept. FPL-GTR-93. USDA Forest Serv., Forest Prod. Lab., Madison, WI

Lebow S, Lebow P, Foster D (2008) Estimating preservative release from treated wood exposed to precipitation. Wood Fiber Sci 40:562–571

Morrell JJ, Lebow ST (1991) Borate treatment of seasoned western hemlock and Douglas-fir lumber. Forest Prod J 41:27–29

Morrell JJ, Winandy JE (1987) Incising practices used to improve preservative treatment in western species: A preliminary survey. In: Proceeding of American Wood Preservers’ Assoc. Vol 83 AWPA, Granbury TX:400–404

Morris PI (1995) Pacific silver fir is the more-treatable component of hem-fir from coastal British Columbia. Forest Prod J 45:37–40

Morris PI, Morrell JJ, Ruddick JNR (1994) A review of incising as a means of improving treatment of sawnwood. Internat. Res Group on Wood Preservation Document No. IRG/WP/40019. IRG, Stockholm, Sweden

Nami Kartal S, Lebow ST (2002) Effects of incising on treatability and leachability of CCA-C-treated eastern hemlock. Forest Prod J 52:44–48

National Institute of Forest Science (NIFoS) notification No. 2016-2 (2016) Standard and specification of wood products. Seoul, Republic of Korea

Nejad M, Ung T, Cooper P (2012) Effect of coatings on ACQ preservative component distribution and solubility after natural weathering exposure. Wood Sci Technol 46:1169–1180CrossRef

Núñez O, Moyano E, Galceran MT (2004) Determination of quaternary ammonium biocides by liquid chromatography – mass spectrometry. J Chromatogr A 1058:89–95CrossRefPubMed

OECD (2013) Revised emission scenario document for wood preservatives. Organisation for Economic Co-operation and Development (OECD): Series on Emission Scenario Documents, vol 2. Paris, France

Paneli M (2001) Suggestions for calculation of the long term emissions of preservative component(s) from treated wood, based on experimental leaching data. Working document EXGP(2001)11 of the Expert Group for the development of the OECD ESD for Wood Preservatives, August 2001

Pang SJ, Hong JP, Lee JJ, Oh JK (2015) Service life estimation of ACQ-treated wood based on biodeterioration resistance. J Korean Wood Sci Technol 43:641–651CrossRef

Pankras S, Cooper P, Ung T, Awoyemi L (2009) Effect of copper to quat ratio on fixation and leaching of preservative components in alkaline copper quat-treated wood. Forest Prod J 59:21–27CrossRef

Pankras S, Cooper P, Ung T, Awoyemi L (2012a) Effect of ammonia addition to alkaline copper quaternary wood preservative solution on the distribution of copper complexes and leaching. Holzforschung 66:397–406

Pankras S, Cooper PA, Wylie S (2012b) Relationship between copper species in solution and leaching from alkaline copper quat (ACQ) treated wood. Holzforschung 66:505–514

Perrin PW (1978) Review of incising and its effects on strength and preservative treatment of wood. Forest Prod J 28:27–33

Republic of Korea Patent (2010) Publication No. 10–0942314. Measurement method for purity of didecyl-dimethyl-ammonium chloride using HPLC-MS

Rhatigan R, Freitag C, El-Kasmi S, Morrell JJ (2004) Preservative treatment of Scots pine an Norway spruce. Forest Prod J 54:91–94

Ruddick JNR (1991) Laser incising of Canadian softwood to improve treatability. Forest Prod J 41:53–57

Smith WB (1986) Treatability of several northeastern species with chromated copper arsenate wood preservative. Forest Prod J 36:63–69

Thevenon MF, Tondi G, Pizzi A (2009) High performance tannin resin-boron wood preservatives for outdoor end-uses. Eur J Wood Prod 67:89–93CrossRef

Ung YT, Cooper PA (2005) Copper stabilization in ACQ-D treated wood: retention, temperature and species effects. Holz Roh Werkst 63:186–191CrossRef

Van Eetvelde G, Stevens M, Vander Mijnsbrugge L (1994) Comparative study on leaching of CCA from treated timber: Modeling of emission data. Document No. IRG/WP 04-50027. International Research Group on Wood Protection

Waldron L, Cooper PA, Ung TY (2005) Prediction of long-term leaching potential of preservative-treated wood by diffusion modeling. Holzforschung 59:581–588CrossRef

Winandy JE, Morrell JJ, Lebow ST (1994) Review of effects of incising on treatability and strength. In: Proceeding wood preservation in the ‘90 s and Beyond. Forest Prod. Soc., Madison, WI:65–69

Titel: Effect of incising on the long-term biodeterioration resistance of alkaline copper quaternary (ACQ) treated wood
verfasst von: Sung-Jun Pang
Jung-Kwon Oh
Jung-Pyo Hong
Sang-Joon Lee
Jun-Jae Lee
Publikationsdatum: 28.01.2017
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 5/2017
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-016-1151-x

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2017

Influence of washing chemo-thermo-mechanical pulps (CTMP) on the emission of volatile organic acids of medium density fibreboards (MDF) prepared therefrom

Moisture adsorption isotherms of yew wood (Taxus baccata L.)

Finite element simulations of the loading and deformation of plywood seat shells

Anatomical and chemical properties of bamboo sheaths (Dendrocalamus brandisii) as potential raw materials for paper making

Predicting the bending properties of air dried and modified Populus tremula L. wood using combined air-coupled ultrasound and electrical impedance spectroscopy

Impact performance of two bamboo-based laminated composites