nach oben

Erschienen in:

01.03.2020 | Original Paper

Effect of Mating Material and Graphitization on Wear of a-C:H Coating in Boundary Base Oil Lubrication

verfasst von: Kouami Auxence Melardot Aboua, Noritsugu Umehara, Hiroyuki Kousaka, Takayuki Tokoroyama, Motoyuki Murashima, Mohd Muhyiddin Bin Mustafa, Yutaka Mabuchi, Tsuyoshi Higuchi, Masahiro Kawaguchi

Erschienen in: Tribology Letters | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Hydrogenated amorphous carbon (a-C:H) coating exhibits different wear behaviors depending on its counterpart material in boundary lubricated sliding contact. In previous works, tribological behaviors of a-C:H coating were investigated against steel, chromium, and germanium counterpart materials. The specific wear rate of a-C:H coating was found to decrease with the ability of its counterpart material to react with or dissolve carbon. The present study investigated how graphitization of a-C:H coating's top layers and interactions of the counterpart material with carbon influence wear behaviors of a-C:H coating in boundary lubrication. Results show that a-C:H coating shows graphitization of its top layers regardless the counterpart material. Correlation with differences in wear behaviors of the a-C:H coating leads to the conclusion that graphitization will induce high wear of a-C:H coating only when there are also atomic interactions between the DLC coating and its counterpart material.

Vorheriger Artikel Correlation of Elastohydrodynamic Friction with Molecular Structure of Highly Refined Hydrocarbon Base Oils

Nächster Artikel Physical Model of Tire-Road Contact Under Wet Conditions

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Budinski, K.G.: Guide to Friction, Wear, and Erosion Testing. ASTM International, West Conshohocken (2009)

Kato, K.: Classification of wear mechanisms/models. In: Stachowiak, G.W. (ed.) Wear—Materials, Mechanisms and Practice, pp. 9–20. Wiley, Chichester (2006)

Neale, M.J., Gee, M.: Guide to Wear Problems and Testing for Industry. William Andrew Pub, Norwich (2001)

Aboua, K.A.M., Umehara, N., Kousaka, H., Tokoroyama, T., Murashima, M., Tasdemir, H.A., Mabuchi, Y., Higuchi, T.: Effect of ZnDTP triboflim’s morphology on friction behaviors of DLC coatings: tribofilm characterization by 3D scanning electron microscope observation. J. Adv. Mech. Des. Syst. Manuf. (2018). https://doi.org/10.1299/jamdsm.2018jamdsm0129 CrossRef

Abdullah Tasdemir, H., Tokoroyama, T., Kousaka, H., Umehara, N., Mabuchi, Y.: Influence of zinc dialkyldithiophosphate tribofilm formation on the tribological performance of self-mated diamond-like carbon contacts under boundary lubrication. Thin Solid Films 562, 389–397 (2014). https://doi.org/10.1016/j.tsf.2014.05.004 CrossRef

Haque, T., Morina, A., Neville, A., Kapadia, R., Arrowsmith, S.: Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions. Wear 266, 147–157 (2009). https://doi.org/10.1016/j.wear.2008.06.011 CrossRef

De Barros’Bouchet, M.I., Martin, J.M., Le-Mogne, T., Vacher, B.: Boundary lubrication mechanisms of carbon coatings by MoDTC and ZDDP additives. Tribol. Int. 38, 257–264 (2005). https://doi.org/10.1016/j.triboint.2004.08.009

Robertson, J.: Diamond-like amorphous carbon. Mater. Sci. Eng. R. Rep. 37, 129–281 (2002). https://doi.org/10.1016/S0927-796X(02)00005-0 CrossRef

Erdemir, A., Donnet, C.: Tribology of diamond-like carbon films: recent progress and future prospects. (2006). https://stacks.iop.org/0022-3727/39/i=18/a=R01?key=crossref.9af827cc7f4ea226ffcf654a7b79e6d5

10.

Bhushan, B.: Modern Tribology Handbook. CRC Press, Boca Raton (2001)

11.

Mobarak, H.M., Chowdhury, M.: Tribological performance of hydrogenated amorphous carbon (a-C: H) DLC coating when lubricated with biodegradable vegetal canola oil. Tribol. Ind. 36, 163–171 (2014)

12.

Almahmud, K.A.H., Varman, M., Kalam, M.A., Masjuki, H.H., Mobarak, H.M., Zulkifli, N.W.M.: Tribological characteristics of amorphous hydrogenated (a-C: H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil. Surf. Coatings Technol. 245, 133–147 (2014). https://doi.org/10.1016/j.surfcoat.2014.02.052 CrossRef

13.

Deng, X., Kousaka, H., Tokoroyama, T., Umehara, N.: Thermal stability and high-temperature tribological properties of a-C: H and Si-DLC deposited by microwave sheath voltage combination plasma. Tribol. Online 8, 257–264 (2013). https://doi.org/10.2474/trol.8.257 CrossRef

14.

Sugimoto, I., Honda, F., Inoue, K.: Analysis of wear behavior and graphitization of hydrogenated DLC under boundary lubricant with MoDTC. Wear 305, 124–128 (2013). https://doi.org/10.1016/j.wear.2013.04.030 CrossRef

15.

Liu, Y., Meletis, E.I.: Evidence of graphitization of diamond-like carbon films during sliding wear. J. Mater. Sci. 32, 3491–3495 (1997). https://doi.org/10.1023/A:1018641304944 CrossRef

16.

Liu, Y., Erdemir, A., Meletis, E.I.: A study of the wear mechanism of diamond-like carbon films. Surf. Coat. Technol. 82, 48–56 (1996). https://doi.org/10.1016/0257-8972(95)02623-1 CrossRef

17.

Aboua, K.A.M., Umehara, N., Kousaka, H., Tokoroyama, T., Murashima, M., Mabuchi, Y., Higuchi, T., Kawaguchi, M.: Effect of carbon diffusion on friction and wear behaviors of diamond-like carbon coating against germanium in boundary base oil lubrication. Tribol. Lett. 67, 65 (2019). https://doi.org/10.1007/s11249-019-1179-2 CrossRef

18.

Aboua, K.A.M., Umehara, N., Kousaka, H., Deng, X., Tasdemir, H.A., Mabuchi, Y., Higuchi, T., Kawaguchi, M.: Effect of carbon diffusion on friction and wear properties of diamond-like carbon in boundary base oil lubrication. Tribol. Int. 113, 389–398 (2017). https://doi.org/10.1016/j.triboint.2016.10.047 CrossRef

19.

Aboua, K.A.M., Umehara, N., Kousaka, H., Tokoroyama, T., Murashima, M., Mabuchi, Y., Higuchi, T., Kawaguchi, M.: Effect of carbon diffusion on friction and wear behaviors of diamond-like carbon coating against Cr-plating in boundary base oil lubrication. Tribol. Online. 13, 290–300 (2018). https://doi.org/10.2474/trol.13.290 CrossRef

20.

Krishtal, M.A.: Diffusion processes in iron alloys. Isr. Progr. Sci. Transl. Jerusalem. 135–137 (1970)

21.

Scace, R.I., Slack, G.A.: Solubility of carbon in silicon and germanium. J. Chem. Phys. 30, 1551–1555 (1959). https://doi.org/10.1063/1.1730236 CrossRef

22.

Novoselov, K.S., Jiang, D., Schedin, F., Booth, T.J., Khotkevich, V.V., Morozov, S.V., Geim, A.K.: Two-dimensional atomic crystals. Proc. Natl. Acad. Sci. USA 102, 10451–10453 (2005). https://doi.org/10.1073/pnas.0502848102 CrossRef

23.

Johra, F.T., Lee, J.W., Jung, W.G.: Facile and safe graphene preparation on solution based platform. J. Ind. Eng. Chem. 20, 2883–2887 (2014). https://doi.org/10.1016/j.jiec.2013.11.022 CrossRef

24.

Mahmoodaliofkhazraeiali, N., Milne, W.I., Ozkan, C.S., Mitura, S., Gervasoni, J.L.: Graphene Science Handbook: Fabrication Methods. CRC Press, Boca Raton (2016)

25.

Anna, A., Oleg, B., Halyna, K., Egor, U., Tibor, I., Oleksander, R., Stepan, P., Alexander, K.: In situ XPS characterization of diamond films after AR + cluster ion beam sputtering. pp. 1–6 (2015)

26.

Xie, F.Y., Xie, W.G., Gong, L., Zhang, W.H., Chen, S.H., Zhang, Q.Z., Chen, J.: Surface characterization on graphitization of nanodiamond powder annealed in nitrogen ambient. Surf. Interface Anal. 42, 1514–1518 (2010). https://doi.org/10.1002/sia.3350 CrossRef

27.

Moulder, J.F., Stickle, W.F., Sobol, P.E., Bomben, K.D.: Handbook of X-ray photoelectron spectroscopy: a reference book of standard spectra for identification and interpretation of XPS data. Perkin-Elmer Corporation, Waltham (1992)

28.

Hu, C.Q., Zheng, B., Zhu, J.Q., Han, J.C., Zheng, W.T., Guo, L.F.: Increasing sp³ hybridized carbon atoms in germanium carbide films by increasing the argon ion energy and germanium content. J. Phys. D. Appl. Phys. (2010). https://doi.org/10.1088/0022-3727/43/13/135103

29.

Han, J., Jiang, C., Zhu, J.: Non-hydrogenated amorphous germanium carbide with adjustable microstructure and properties: a potential anti-reflection and protective coating for infrared windows. Surf. Interface Anal. 45, 685–690 (2013). https://doi.org/10.1002/sia.5130 CrossRef

30.

Yang, D., Velamakanni, A., Bozoklu, G., Park, S., Stoller, M., Piner, R.D., Stankovich, S., Jung, I., Field, D.A., Ventrice, C.A., Ruoff, R.S.: Chemical analysis of graphene oxide films after heat and chemical treatments by X-ray photoelectron and Micro-Raman spectroscopy. Carbon N. Y. 47, 145–152 (2009). https://doi.org/10.1016/j.carbon.2008.09.045 CrossRef

31.

Mérel, P., Tabbal, M., Chaker, M., Moisa, S., Margot, J.: Direct evaluation of the sp³ content in diamond-like-carbon films by XPS. Appl. Surf. Sci. 136, 105–110 (1998). https://doi.org/10.1016/S0169-4332(98)00319-5 CrossRef

32.

Díaz, J., Paolicelli, G., Ferrer, S., Comin, F.: Separation of the sp³ and sp² components in the C1s photoemission spectra of amorphous carbon films. Phys. Rev. B. 54, 8064–8069 (1996). https://doi.org/10.1103/PhysRevB.54.8064 CrossRef

33.

Lee, W.H., Lee, J.G., Reucroft, P.J.: XPS study of carbon fiber surfaces treated by thermal oxidation in a gas mixture of O₂/(O₂ + N₂). Appl. Surf. Sci. 171, 136–142 (2001). https://doi.org/10.1016/S0169-4332(00)00558-4 CrossRef

34.

Papirer, E., Lacroix, R., Donnet, J., Nanse, G., Fioux, P.: XPS study of the halogenation of carbon black - Part 1. Bromination. Carbon N. Y. 32, 1341–1358 (1994)CrossRef

35.

Lee, J.-M., Kim, J.-W., Lim, J.-S., Kim, T.-J., Kim, S.-D., Park, S., Lee, Y.: X-ray Photoelectron spectroscopy study of cobalt supported multi-walled carbon nanotubes prepared by different precursors. Carbon Lett. 8, 120–126 (2007)CrossRef

36.

Chen, Y., Zhang, L.: Polishing of Diamond Materials. Springer, London (2013)CrossRef

37.

Campbell, F.C., Flake, C.: Elements of Metallurgy and Engineering Alloys. ASM International, Materials Park (2008)CrossRef

Titel: Effect of Mating Material and Graphitization on Wear of a-C:H Coating in Boundary Base Oil Lubrication
verfasst von: Kouami Auxence Melardot Aboua
Noritsugu Umehara
Hiroyuki Kousaka
Takayuki Tokoroyama
Motoyuki Murashima
Mohd Muhyiddin Bin Mustafa
Yutaka Mabuchi
Tsuyoshi Higuchi
Masahiro Kawaguchi
Publikationsdatum: 01.03.2020
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 1/2020
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-019-1248-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Response to Comment on “On the Origin of Frictional Energy Dissipation”, by B.N.J. Persson

Study of Micro- and Nanoscale Wetting Properties of Lubricants Using AFM Force–Distance Curves

Comment on “On the Origin of Frictional Energy Dissipation”

Relating Tribological Performance and Tribofilm Formation to the Adsorption Strength of Surface-Active Precursors

Perfluoroalkoxy (PFA)-α-Alumina Composites: Effect of Environment on Tribological Performance

A New Horizon for Evaluating Tire Grip Within a Laboratory Environment

Premium Partner

Marktübersichten