nach oben

Journal of Sol-Gel Science and Technology

Erschienen in:

01.10.2014 | Original Paper

Effect of titanium isopropoxide addition in low-temperature cured TiO₂ photoanode for a flexible DSSC

verfasst von: Hohyoung Kim, Taejin Hwang

Erschienen in: Journal of Sol-Gel Science and Technology | Ausgabe 1/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, titanium isopropoxide (TIPP) was employed as a binder for low-temperature processed photoanode of a flexible dye sensitized solar cell. The coating paste for dip-coating method was prepared comprising commercially available TiO₂ nanoparticles, TIPP and small amount of water. Effect of binder addition was compared at three different TIPP to TiO₂ nanoparticle molar ratios; 0.05, 0.1 and 0.3. By adding TIPP molecules directly to the coating paste, flexible photoanodes were successfully prepared. An optimum TIPP to TiO₂ particle ratio was selected considering the particle dispersion stability in the paste and the microstructure of prepared photoanode. The photoanode prepared using the paste with optimized composition showed highest photoconversion efficiency of 1.96 % from a unit cell.

Vorheriger Artikel Junction properties of In2O3:Al2O3 composite on p-type silicon by sol–gel method

Nächster Artikel Photovoltaic properties of Pt/BiFeO3 thin film/fluorine-doped tin oxide capacitor

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

O’Regan B, Gratzel M (1991) A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353:737–740. doi:10.1038/353737a0 CrossRef

Upadhyaya HM, Senthilarasu S, Hsu M-H, Kumar DK (2013) Recent progress and the status of dye-sensitised solar cell (DSSC) technology with state-of-the-art conversion efficiencies. Sol Energy Mater Sol Cells 119:291–295. doi:10.1016/j.solmat.2013.08.031 CrossRef

Narayan MR (2012) Review: dye sensitized solar cells based on natural photosensitizers. Renew Sustain Energy Rev 16:208–215. doi:10.1016/j.rser.2011.07.148

Gong J, Liang J, Sumathy K (2012) Review on dye-sensitized solar cells (DSSCs): fundamental concepts and novel materials. Renew Sustain Energy Rev 16:5848–5860. doi:10.1016/j.rser.2012.04.044 CrossRef

Pagliaro M, Ciriminna R, Palmisano G (2008) Flexible solar cells. ChemSusChem 1:880–891. doi:10.1002/cssc.200800127 CrossRef

Liao J-Y, Lei B-X, Chen H-Y et al (2012) Oriented hierarchical single crystalline anatase TiO2 nanowire arrays on Ti-foil substrate for efficient flexible dye-sensitized solar cells. Energy Environ Sci 5:5750–5757. doi:10.1039/C1EE02766B CrossRef

Zou D, Wang D, Chu Z et al (2010) Fiber-shaped flexible solar cells. Coord Chem Rev 254:1169–1178. doi:10.1016/j.ccr.2010.02.012 CrossRef

Li Y, Yoo K, Lee D-K et al (2010) Highly bendable composite photoelectrode prepared from TiO2/polymer blend for low temperature fabricated dye-sensitized solar cells. Curr Appl Phys 10:e171–e175. doi:10.1016/j.cap.2010.01.014 CrossRef

Weerasinghe HC, Huang F, Cheng Y-B (2013) Fabrication of flexible dye sensitized solar cells on plastic substrates. Nano Energy 2:174–189. doi:10.1016/j.nanoen.2012.10.004 CrossRef

10.

Lee J-W, Choi JO, Jeong J-E et al (2013) Energy harvesting of flexible and translucent dye-sensitized solar cell fabricated by laser assisted nano particle deposition system. Electrochim Acta 103:252–258. doi:10.1016/j.electacta.2013.04.050 CrossRef

11.

Balraju P, Suresh P, Kumar M et al (2009) Effect of counter electrode, thickness and sintering temperature of TiO2 electrode and TBP addition in electrolyte on photovoltaic performance of dye sensitized solar cell using pyronine G (PYR) dye. J Photochem Photobiol A 206:53–63. doi:10.1016/j.jphotochem.2009.05.014 CrossRef

12.

Gutiérrez-Tauste D, Zumeta I, Vigil E et al (2005) New low-temperature preparation method of the TiO2 porous photoelectrode for dye-sensitized solar cells using UV irradiation. J Photochem Photobiol A 175:165–171. doi:10.1016/j.jphotochem.2005.04.031 CrossRef

13.

Wessels K, Wark M, Oekermann T (2010) Efficiency improvement of dye-sensitized solar cells based on electrodeposited TiO2 films by low temperature post-treatment. Electrochim Acta 55:6352–6357. doi:10.1016/j.electacta.2010.06.059 CrossRef

14.

Kovash CS Jr, Hoefelmeyer JD, Logue BA (2012) TiO2 compact layers prepared by low temperature colloidal synthesis and deposition for high performance dye-sensitized solar cells. Electrochim Acta 67:18–23. doi:10.1016/j.electacta.2012.01.092 CrossRef

15.

Pasquier AD (2007) An approach to laminated flexible dye sensitized solar cells. Electrochim Acta 52:7469–7474. doi:10.1016/j.electacta.2007.06.028 CrossRef

16.

Park N-G, Kim KM, Kang MG et al (2005) Chemical sintering of nanoparticles: a methodology for low-temperature fabrication of dye-sensitized TiO2 films. Adv Mater 17:2349–2353. doi:10.1002/adma.200500288 CrossRef

17.

Lee S, Kim JY, Youn SH et al (2007) Preparation of a nanoporous CaCO3-coated TiO2 electrode and its application to a dye-sensitized solar cell. Langmuir 23:11907–11910. doi:10.1021/la701826v CrossRef

18.

Chen J, Luo J, Jin X et al (2013) Promotion of charge transport in low-temperature fabricated TiO2 electrodes by curing-induced compression stress. Electrochim Acta 100:85–92. doi:10.1016/j.electacta.2013.03.127 CrossRef

19.

Menzies DB, Dai Q, Bourgeois L et al (2007) Modification of mesoporous TiO2 electrodes by surface treatment with titanium(IV), indium(III) and zirconium(IV) oxide precursors: preparation, characterization and photovoltaic performance in dye-sensitized nanocrystalline solar cells. Nanotechnology 18:125608CrossRef

20.

Cho SH, Yoon YJ (2013) Multi-layer TiO2 films prepared by aerosol deposition method for dye-sensitized solar cells. Thin Solid Films 547:91–94. doi:10.1016/j.tsf.2013.04.107 CrossRef

21.

Vijayakumar V, Du Pasquier A, Birnie DP III (2011) Electrical and optical studies of flexible stainless steel mesh electrodes for dye sensitized solar cells. Sol Energy Mater Sol Cells 95:2120–2125. doi:10.1016/j.solmat.2011.03.010 CrossRef

22.

Hao Y, Rui Y, Li Y et al (2014) Size-tunable TiO2 nanocrystals from titanium (IV) bis (ammonium lactato) dihydroxide and towards enhance the performance of dye-sensitized solar cells. Electrochim Acta 117:268–275. doi:10.1016/j.electacta.2013.11.128 CrossRef

23.

Syrrokostas G, Giannouli M, Yianoulis P (2009) Effects of paste storage on the properties of nanostructured thin films for the development of dye-sensitized solar cells. Renew Energy 34:1759–1764. doi:10.1016/j.renene.2008.12.029 CrossRef

24.

Dhungel SK, Park JG (2010) Optimization of paste formulation for TiO2 nanoparticles with wide range of size distribution for its application in dye sensitized solar cells. Renew Energy 35:2776–2780. doi:10.1016/j.renene.2010.04.031 CrossRef

25.

Bakhshayesh AM, Mohammadi MR (2013) Development of nanostructured porous TiO2 thick film with uniform spherical particles by a new polymeric gel process for dye-sensitized solar cell applications. Electrochim Acta 89:90–97. doi:10.1016/j.electacta.2012.11.060 CrossRef

26.

Nam J-G, Lee E-S, Jung W-C et al (2009) Photovoltaic enhancement of dye-sensitized solar cell prepared from [TiO2/ethyl cellulose/terpineol] paste employing TRITON™ X-based surfactant with carboxylic acid group in the oxyethylene chain end. Mater Chem Phys 116:46–51. doi:10.1016/j.matchemphys.2009.02.037 CrossRef

27.

Vishwas M, Sharma SK, Rao KN et al (2010) Influence of surfactant and annealing temperature on optical properties of sol–gel derived nano-crystalline TiO2 thin films. Spectrochim Acta Part A Mol Biomol Spectrosc 75:1073–1077. doi:10.1016/j.saa.2009.12.057 CrossRef

28.

Thapa A, Zai J, Elbohy H et al (2014) TiO2 coated urchin-like SnO2 microspheres for efficient dye-sensitized solar cells. Nano Res. doi:10.1007/s12274-014-0478-z

29.

Lee K-M, Hsu C-Y, Chiu W-H et al (2009) Dye-sensitized solar cells with a micro-porous TiO2 electrode and gel polymer electrolytes prepared by in situ cross-link reaction. Sol Energy Mater Sol Cells 93:2003–2007. doi:10.1016/j.solmat.2009.07.017 CrossRef

30.

Opara Krašovec U, Berginc M, Hočevar M, Topič M (2009) Unique TiO2 paste for high efficiency dye-sensitized solar cells. Sol Energy Mater Sol Cells 93:379–381. doi:10.1016/j.solmat.2008.11.012 CrossRef

Titel: Effect of titanium isopropoxide addition in low-temperature cured TiO2 photoanode for a flexible DSSC
verfasst von: Hohyoung Kim
Taejin Hwang
Publikationsdatum: 01.10.2014
Verlag: Springer US
Erschienen in: Journal of Sol-Gel Science and Technology / Ausgabe 1/2014
Print ISSN: 0928-0707
Elektronische ISSN: 1573-4846
DOI: https://doi.org/10.1007/s10971-014-3427-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1/2014

Preparation, characterization, catalytic performance and antibacterial activity of Ag photodeposited on monodisperse ZnO submicron spheres

Effects of Cu addition on the structure and magnetic properties of L10-FePt nanoparticles prepared by sol–gel method

Formulation and evaluation of thermoreversible, mucoadhesive in situ intranasal gel of rizatriptan benzoate

A biofriendly sol–gel route to new hybrid gels for enzyme encapsulation

Erratum to: Sol–gel synthesis and characterization of SiO2–TaC nanocomposites with controlled volume fraction

Microwave assisted non-aqueous sol–gel synthesis of LiNiPO4 and its copper doped analogues

Premium Partner

Marktübersichten