nach oben

Innovative Infrastructure Solutions

Erschienen in:

01.09.2023 | Technical Paper

Effect of waste plastic polyethylene terephthalate on properties of asphalt cement

verfasst von: Taisir Khedaywi, Madhar Haddad, Hakam Bataineh

Erschienen in: Innovative Infrastructure Solutions | Ausgabe 9/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

There are numerous environmental and performance benefits to modifying asphalt binders. The wet mixing method was used to add waste polyethylene terephthalate (PET) to asphalt binder (60/70 grade) in this study. By volume of binder, five different percentages of waste PET were used (0%, 5%, 10%, 15%, and 20%). Several laboratory tests were conducted on waste PET modified asphalt binder to study the effect of the modification on the physical properties of asphalt. On the waste PET modified asphalt binder, conventional asphalt binder tests (penetration, ductility, softening point, flash and fire point, and unit weight) as well as Superpave tests which include performance grading (PG) (rotational viscosity, dynamic shear rheometer, and bending beam rheometer) were conducted. The penetration, softening point, flash and fire points, and unit weight of the waste PET modified asphalt were all improved. Also, the dynamic shear rheometer (DSR) test results showed that the asphalt-waste PET binders have enhanced rutting resistance. Furthermore, using this research as an alternative recycling method for PET bottles has significant environmental benefits, and the process can be considered feasible and viable.

Vorheriger Artikel Seismic evaluation of traditional timber framed masonry systems using shake table tests and finite element modelling

Nächster Artikel Eco-friendly warm mix asphalt mixtures incorporating electric arc furnace steel slag as substitute to conventional aggregates

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ravindranath K, Mashelkar RA (1986) Polyethylene terephthalate—I. Chemistry, thermodynamics and transport properties. Chem Eng Sci 41(9):2197–2214CrossRef

Commons.wikimedia.org (2020) File:Recycling pet.svg. [online] Available at: <https://commons.wikimedia.org/w/index.php?title=File:Recycling_pet.svg&oldid=511338289> [Accessed 27 May 2022]

Das SK, Eshkalak SK, Chinnappan A, Ghosh R, Jayathilaka WADM, Baskar C, Ramakrishna S (2021) Plastic recycling of polyethylene terephthalate (PET) and polyhydroxybutyrate (PHB)—A comprehensive review. Mater Circ Economy 3(1):1–22

Lytle CLG (2011) When the mermaids cry: the great plastic tide. Ecological and Human Health Impacts

D’Ambrières W (2019) Plastics recycling worldwide: current overview and desirable changes field actions science reports. J Field Act 19:12–21

Sojobi AO, Owamah HI (2014) Evaluation of the suitability of low-density polyethylene (LDPE) waste as fine aggregate in concrete. Niger J Technol 33(4):409–425CrossRef

Geyer R (2020) Production, use, and fate of synthetic polymers. In: Plastic waste and recycling (pp. 13–32). Academic Press

Köfteci S, Ahmedzade P, Kultayev B (2014) Performance evaluation of bitumen modified by various types of waste plastics. Constr Build Mater 73:592–602CrossRef

Al-Qadi QN, Al-Qadi AN, Khedaywi TS (2014) Effect of oil shale ash on static creep performance of asphalt paving mixtures. Jordan J Earth Environ Sci 6(2):67–75

10.

Al Qadi ANS, Khedaywi TS, Haddad MA, Al-Rababa’ah OA (2021) Investigating the effect of olive husk ash on the properties of asphalt concrete mixture. Annales de Chimie Science des Matériaux 45(1):11–15. https://doi.org/10.18280/acsm.450102CrossRef

11.

Al-Omari AA, Khedaywi TS, Khasawneh MA (2018) Laboratory characterization of asphalt binders modified with waste vegetable oil using SuperPave specifications. Int J Pavement Res Technol 11(1):68–76CrossRef

12.

Khedaywi TS (2019) Laboratory study to evaluate the effect of waste toner on dynamic creep of asphalt concrete mixtures. In: Fifth international conference on sustainable construction materials and technologies (SCMT5), Kingston University, London, UK, 14–17, pp 48–16

13.

Khedaywi T, Al Kofahi N, Al-Zoubi M (2020) Effect of olive waste ash on properties of asphalt cement and asphalt concrete mixtures. Int J Pavement Res Technol 13(3):276–285CrossRef

14.

Khedaywi TS, Haddad MA, Al Qadi ANS, Al-Rababa’ah OA (2021) Investigating the effect of addition of olive husk ash on asphalt binder properties. Annales de Chimie Science des Matériaux 45(3):239–243. https://doi.org/10.18280/acsm.450307CrossRef

15.

Al-Mistarehi BW, Khadaywi TS, Hussein AK (2021) Investigating the effects on creep and fatigue behavior of asphalt mixtures with recycled materials as fillers. J King Saud Univ Eng Sci 33(5):355–363

16.

Haddad M, Khedaywi T (2023) Investigating the effect of olive husk ash on dynamic creep of asphalt concrete mixtures. J Eng Sci Technol 18(2):931–948

17.

Gupta H, Singh G (2022) Experimental analysis of utilization of waste polyethylene in bituminous concrete mixes. Int J Res Publ Rev 3(9):1351–1354

18.

Li M, Chen X, Cong P, Luo C, Zhu L, Li H, Zhang Y, Chao M, Yan L (2022) Facile synthesis of polyethylene-modified asphalt by chain end-functionalization. Compos Commun. https://doi.org/10.1016/j.coco.2022.101088CrossRef

19.

Nejres AM, Mustafa YF, Aldewachi HS (2022) Evaluation of natural asphalt properties treated with egg shell waste and low density polyethylene. Int J Pavement Eng 23(1):39–45. https://doi.org/10.1080/10298436.2020.1728534CrossRef

20.

Tuˇsar M, Kakar MR, Poulikakos LD, Pasquini E, Baliello A, Pasetto M, Porot L, Wang D, CannoneFalchetto A, Dalmazzo D, Lo Presti D, Giancontieri G, Varveri A, Veropalumbo R, Viscione N, Vasconcelos K, Carter A (2022) RILEM TC 279 WMR round robin study on waste polyethylene modified bituminous binders: advantages and challenges. Road Mater Pavement Des. https://doi.org/10.1080/14680629.2021.2017330CrossRef

21.

Wang D, Baliello A, Poulikakos L, Vasconcelos K, Kakar MR, Giancontieri G, Pasquini E, Porot L, Tušar M, Riccardi C, Pasetto M, Presti DL, Falchetto AC (2022) Rheological properties of asphalt binder modified with waste polyethylene: an interlaboratory research from the RILEM TC WMR. Resour Conser Recycl. https://doi.org/10.1016/j.resconrec.2022.106564CrossRef

22.

Wang T (2022) Study and application of compatibility of waste polyethylene-modified asphalt. J Mater Civ Eng. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004315CrossRef

23.

Kakar MR, Mikhailenko P, Piao Z, Bueno M, Poulikakos L (2021) Analysis of waste polyethylene (PE) and its by-products in asphalt binder. Construct Build Mater. https://doi.org/10.1016/j.conbuildmat.2021.122492CrossRef

24.

Du Z, Jiang C, Yuan J, Xiao F, Wang J (2020) Low temperature performance characteristics of polyethylene modified asphalts–a review. Construct Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.120704CrossRef

25.

Sharma A, Dubey M (2018) Bituminous concrete mix design using different percentage of waste polyethylene to improve the strength of road. Int J Adv Technol Eng Res 8(4):4–9

26.

Fernandes S, Costa L, Silva H, Oliveira J (2017) Effect of incorporating different waste materials in bitumen. Ciência Tecnologia dos Materiais 29(1):e204–e209. https://doi.org/10.1016/j.ctmat.2016.07.003CrossRef

27.

García-Travé G, Tauste R, Moreno-Navarro F, Sol-Sánchez M, Rubio-Gámez MC (2016) Use of reclaimed geomembranes for modification of mechanical performance of bituminous binders. J Mater Civ Eng 28(7):04016021. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001507CrossRef

28.

Fang C, Zhang M, Yu R, Liu X (2015) Effect of preparation temperature on the aging properties of waste polyethylene modified asphalt. J Mater Sci Technol 31(3):320–324. https://doi.org/10.1016/j.jmst.2014.04.019CrossRef

29.

Hu JB, Fang CQ, Zhou SS, Jiao LN, Zhang MR, Wu D (2015) Rheological properties of packaging-waste-polyethylene-modified asphalt. J Vinyl Add Tech 21(3):215–219. https://doi.org/10.1002/vnl.21388CrossRef

30.

Yan K, Xu H, You L (2015) Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene. Constr Build Mater 83:143–149. https://doi.org/10.1016/j.conbuildmat.2015.02.092CrossRef

31.

Rahman MN, Ahmeduzzaman M, Sobhan MA, Ahmed TU (2013) Performance evaluation of waste polyethylene and PVC on hot asphalt mixtures. Am J Civil Eng Archit 1(5):97–102CrossRef

32.

Vargas MA, Vargas MA, Sánchez-Sólis A, Manero O (2013) Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling. Constr Build Mater 45:243–250. https://doi.org/10.1016/j.conbuildmat.2013.03.064CrossRef

33.

Attaelmanan M, Feng CP, Al-Hadidy AI (2011) Laboratory evaluation of HMA with high density polyethylene as a modifier. Constr Build Mater 25(5):2764–2770. https://doi.org/10.1016/j.conbuildmat.2010.12.037CrossRef

34.

Al-Hadidy AI, Yi-qiu T (2009) Effect of polyethylene on life of flexible pavements. Constr Build Mater 23(3):1456–1464. https://doi.org/10.1016/j.conbuildmat.2008.07.004CrossRef

35.

Punith VS, Veeraragavan A (2007) Behavior of asphalt concrete mixtures with reclaimed polyethylene as additive. J Mater Civ Eng 19(6):500–507. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:6(500)CrossRef

36.

AI-Dubabe IA, AI-Abdul Wahhab HI, Asi IM, Ali MF (1998) Polymer modification of Arab asphalt. J Mater Civil Eng 10(3):161–167. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:3(161)CrossRef

37.

Miłkowski W (1985) Catalytic modification of road asphalt by polyethylene. J Transp Eng 111(1):54–72CrossRef

38.

Jaar M, Chaabane W (2021) Results of the waste sorting analysis. Berlin: Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH

39.

Swami V, Jirge A, Patil K, Patil S, Patil S, Salokhe K (2012) Use of waste plastic in construction of bituminous road. Int J Eng Sci Technol 4(5)

40.

Awwad MT, Shbeeb L (2007) The use of polyethylene in hot asphalt mixtures. Am J Appl Sci 4(6):390–396. https://doi.org/10.3844/ajassp.2007.390.396CrossRef

41.

ASTM (2020) Standard test method for penetration of bituminous materials D5–20. West Conshohocken, PA: ASTM International

42.

ASTM (2017) Standard Test Method for Ductility of Asphalt Materials D113–17. West Conshohocken, PA: ASTM International

43.

ASTM (2014) Standard Test Method for Softening Point of Bitumen (Ring-and-ball Apparatus) D36–14. West Conshohocken, PA: ASTM International

44.

ASTM (2018) Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester D92–18. West Conshohocken, PA: ASTM International

45.

ASTM (2021) Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method) D70–21. West Conshohocken, PA: ASTM International

46.

Biron M (2020) A practical guide to plastics sustainability: Concept, solutions, and implementation, Kidlington, Osford. William Andrew, Applied Science Publishers, Cambridge

47.

ASTM (2015) Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer D4402–15. West Conshohocken, PA: ASTM International

48.

Abed YH, Al-Haddad AHA (2020) Temperature susceptibility of modified asphalt binders. In: IOP conference series: materials science and engineering, 671(1), p 012121. IOP Publishing

49.

Hunter RN, Self A, Read J, Hobson E (2015) The shell bitumen handbook. Ice Publishing, London, p 789

50.

ASTM (2021) Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test) D2872–21. West Conshohocken, PA: ASTM International

51.

ASTM (2021) Standard test method for accelerated aging of asphalt binder using a pressurized aging vessel (PAV) D6521–19a. West Conshohocken, PA: ASTM International

52.

ASTM (2015) Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer D7175–15. West Conshohocken. PA: ASTM International

53.

ASTM (2008) Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR) D6648–08. West Conshohocken. PA: ASTM International

54.

Sojobi AO, Nwobodo SE, Aladegboye OJ (2016) Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete. Cogent Eng 3(1):1133480CrossRef

55.

Anderson DA, Kennedy TW (1993) Development of SHRP binder specification (with discussion). J Assoc Asphalt Paving Technol, 62

56.

Pfeiffer JP, van Doormaal PM (1936) The rheological properties of asphaltic bitumen. J Inst Pet Technol 22:414

57.

Hainin MR, Aziz MMA, Adnan AM, Hassan NA, Jaya RP, Liu HY (2015) Performance of modified asphalt binder with tire rubber powder. Jurnal Teknologi. 73(4)

Titel: Effect of waste plastic polyethylene terephthalate on properties of asphalt cement
verfasst von: Taisir Khedaywi
Madhar Haddad
Hakam Bataineh
Publikationsdatum: 01.09.2023
Verlag: Springer International Publishing
Erschienen in: Innovative Infrastructure Solutions / Ausgabe 9/2023
Print ISSN: 2364-4176
Elektronische ISSN: 2364-4184
DOI: https://doi.org/10.1007/s41062-023-01208-4

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 9/2023

Optimization of the mechanical behavior of polymer composites reinforced with fibers, nanoparticles, and rubbers

Influence of loading direction on X-HVB shear connectors in partially composite steel–concrete beams exposed to fire

Prediction of water quality parameters using support vector regression

A review on structural health monitoring: past to present

Mechanical characterization of a gypseous soil: experimental and numerical studies

Geomechanical characteristics and failure analysis of the limestone slope at Sahastradhara–Chamasari road Dehradun Uttarakhand India