nach oben

Metals and Materials International

Erschienen in:

23.05.2019

Enhancement in Viscoplastic Self-Consistent FLD Prediction Model and Its Application for Austenitic and Ferritic Stainless Steels

verfasst von: Youngung Jeong, Timo Manninen

Erschienen in: Metals and Materials International | Ausgabe 6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The computational algorithm of a crystal-plastic-based FLD predictive model (VPSC-FLD) developed in Jeong et al. (Model Simul Mater Sci Eng, 2016. https://doi.org/10.1088/0965-0393/24/5/055005) is enhanced. A real-time monitor process runs while the forming limit diagram is calculated by parallel computation on various strain loading paths. The monitor process enables the CPU workers to communicate with each other so that the unnecessary model runs can be determined and terminated on the fly. Moreover, the advanced numerical algorithm suggested earlier by Schwindt et al. (Int J Plast 73:62–99, 2015. https://doi.org/10.1016/j.ijplas.2015.01.005) is implemented to VPSC-FLD. The new numerical algorithm and real-time monitor has improved both the overall computational speed and the efficiency in parallel computation. The enhanced VPSC-FLD model is applied for austenitic and ferritic stainless samples in terms of flow stress–strain curve, R-values, and forming limit diagram. The linearization scheme applied on the local constitutive description is studied to reveal its impacts on various macroscopic properties. It is found that the linearization scheme with the best fit on uniaxial data is not necessary the one that gives the best predictive accuracy on the forming limit prediction.

Vorheriger Artikel Variation in Crystallographic Orientation and Twinning Activation with Size of Individual Grains in Rolled Magnesium Alloy

Nächster Artikel Wear Behavior of P/M High Nb Containing γ-TiAl Alloy in Different Environments

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. Keeler, W. Backhofen, Plastic instability and fracture in sheet stretched over rigid punches. ASM Trans. Q. 56, 25–48 (1964)

F. Abu-Farha, L.G. Hector, M. Khraisheh, Cruciform-shaped specimens for elevated temperature biaxial testing of lightweight materials. JOM 61, 48–56 (2009). https://doi.org/10.1007/s11837-009-0121-8 CrossRef

Y. Hanabusa, H. Takizawa, T. Kuwabara, Numerical verification of a biaxial tensile test method using a cruciform specimen. J. Mater. Process. Technol. 213, 961–970 (2013). https://doi.org/10.1016/j.jmatprotec.2012.12.007 CrossRef

J. Li, J.E. Carsley, T.B. Stoughton, L.G. Hector, S.J. Hu, Forming limit analysis for two-stage forming of 5182-O aluminum sheet with intermediate annealing. Int. J. Plast. 45, 21–43 (2013). https://doi.org/10.1016/j.ijplas.2012.10.004 CrossRef

A.F. Graf, W.F. Hosford, Calculations of forming limit diagrams for changing strain paths ALEJANDRO. Metall. Trans. A 24, 2497–2501 (1993). https://doi.org/10.1007/BF02646528 CrossRef

T.B. Stoughton, General forming limit criterion for sheet metal forming. Int. J. Mech. Sci. 42, 1–27 (2000). https://doi.org/10.1016/S0020-7403(98)00113-1 CrossRef

K. Yoshida, T. Kuwabara, M. Kuroda, Path-dependence of the forming limit stresses in a sheet metal. Int. J. Plast. 23, 361–384 (2007). https://doi.org/10.1016/j.ijplas.2006.05.005 CrossRef

Z. Marciniak, K. Kuczyński, T. Pokora, Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension. Int. J. Mech. Sci. 15, 789–800 (1973). https://doi.org/10.1016/0020-7403(73)90068-4 CrossRef

Y. Jeong, M.S. Pham, M. Iadicola, A. Creuziger, T. Foecke, Forming limit prediction using a self-consistent crystal plasticity framework: a case study for body-centered cubic materials. Model. Simul. Mater. Sci. Eng. (2016). https://doi.org/10.1088/0965-0393/24/5/055005 CrossRef

10.

C. Schwindt, F. Schlosser, M.A. Bertinetti, M. Stout, J.W. Signorelli, Experimental and Visco-Plastic Self-Consistent evaluation of forming limit diagrams for anisotropic sheet metals: an efficient and robust implementation of the M-K model. Int. J. Plast 73, 62–99 (2015). https://doi.org/10.1016/j.ijplas.2015.01.005 CrossRef

11.

F. Barlat, O. Richmond, Prediction of tricomponent plane stress yield surfaces and associated flow and failure behavior of strongly textured f.c.c. polycrystalline sheets. Mater. Sci. Eng. 95, 15–29 (1987). https://doi.org/10.1016/0025-5416(87)90494-0 CrossRef

12.

K. Inal, K.W. Neale, A. Aboutajeddine, Forming limit comparisons for FCC and BCC sheets. Int. J. Plast. 21, 1255–1266 (2005). https://doi.org/10.1016/j.ijplas.2004.08.001 CrossRef

13.

C. John Neil, S.R. Agnew, Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B. Int. J. Plast. 25, 379–398 (2009). https://doi.org/10.1016/j.ijplas.2008.05.003 CrossRef

14.

J.S. Nagra, A. Brahme, R.K. Mishra, R.A. Lebensohn, K. Inal, An efficient full-field crystal plasticity-based M-K framework to study the effect of 3D microstructural features on the formability of polycrystalline materials. Model. Simul. Mater. Sci. Eng. (2018). https://doi.org/10.1088/1361-651X/aadc20 CrossRef

15.

J.W. Signorelli, M.A. Bertinetti, P.A. Turner, Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model. Int. J. Plast. 25, 1–25 (2009). https://doi.org/10.1016/j.ijplas.2008.01.005 CrossRef

16.

H. Wang, P.D. Wu, K.P. Boyle, K.W. Neale, On crystal plasticity formability analysis for magnesium alloy sheets. Int. J. Solids Struct. 48, 1000–1010 (2011). https://doi.org/10.1016/j.ijsolstr.2010.12.004 CrossRef

17.

P.D. Wu, K.W. Neale, E. Van Der Giessen, On crystal plasticity FLD analysis. Proc. R. Soc. A Math. Phys. Eng. Sci. 1, 2 (1997). https://doi.org/10.1098/rspa.1997.0099 CrossRef

18.

K. Yoshida, T. Ishizaka, M. Kuroda, S. Ikawa, The effects of texture on formability of aluminum alloy sheets. Acta Mater. 55, 4499–4506 (2007). https://doi.org/10.1016/j.actamat.2007.04.014 CrossRef

19.

K. Chung, H. Kim, C. Lee, Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity. Part I: deformation path insensitive formula based on theoretical models. Int. J. Plast. 58, 3–34 (2014). https://doi.org/10.1016/j.ijplas.2014.03.009 CrossRef

20.

Q. Hu, L. Zhang, Q. Ouyang, X. Li, X. Zhu, J. Chen, Prediction of forming limits for anisotropic materials with nonlinear strain paths by an instability approach. Int. J. Plast. 103, 143–167 (2018). https://doi.org/10.1016/j.ijplas.2018.01.006 CrossRef

21.

M. Kuroda, V. Tvergaard, Forming limit diagrams for anisotropic metal sheets with different yield criteria. Int. J. Solids Struct. 37, 5037–5059 (2000). https://doi.org/10.1016/S0020-7683(99)00200-0 CrossRef

22.

J. Lian, F. Shen, X. Jia, D.C. Ahn, D.C. Chae, S. Münstermann, W. Bleck, An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction. Int. J. Solids Struct. 151, 20–44 (2017). https://doi.org/10.1016/j.ijsolstr.2017.04.007 CrossRef

23.

L. Zhang, J. Wang, Modeling the localized necking in anisotropic sheet metals. Int. J. Plast. 39, 103–118 (2012). https://doi.org/10.1016/j.ijplas.2012.05.005 CrossRef

24.

J.W. Hutchinson, K.W. Neale, Sheet Necking-II. Time-independent behavior. Mech. Sheet Met. Form. (2011). https://doi.org/10.1007/978-1-4613-2880-3_6 CrossRef

25.

J.W. Hutchinson, K.W. Neale, Sheet Necking-III. Strain-rate effects. Mech. Sheet Met. Form. (2011). https://doi.org/10.1007/978-1-4613-2880-3_11 CrossRef

26.

A. Gupta, M. Ben Bettaieb, F. Abed-Meraim, S.R. Kalidindi, Computationally efficient predictions of crystal plasticity based forming limit diagrams using a spectral database. Int. J. Plast. 103, 168–187 (2018). https://doi.org/10.1016/j.ijplas.2018.01.007 CrossRef

27.

D. Steglich, Y. Jeong, Texture-based forming limit prediction for Mg sheet alloys ZE10 and AZ31. Int. J. Mech. Sci. 117, 102–114 (2016). https://doi.org/10.1016/j.ijmecsci.2016.08.013 CrossRef

28.

R.A. Lebensohn, C.N. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metall. Mater. 41, 2611–2624 (1993). https://doi.org/10.1016/0956-7151(93)90130-K CrossRef

29.

J.W. Hutchinson, Bounds and self-consistent estimates for creep of polycrystalline materials. Proc. R. Soc. A Math. Phys. Eng. Sci. 348, 101–127 (2006). https://doi.org/10.1098/rspa.1976.0027 CrossRef

30.

C. Tome, G.R. Canova, U.F. Kocks, N. Christodoulou, J.J. Jonas, The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals. Acta Metall. 32, 1637–1653 (1984). https://doi.org/10.1016/0001-6160(84)90222-0 CrossRef

31.

C.N. Tomé, Self-consistent polycrystal models: a directional compliance criterion to describe grain interactions. Model. Simul. Mater. Sci. Eng. 7, 723–738 (1999). https://doi.org/10.1088/0965-0393/7/5/305 CrossRef

32.

Y. Jeong, F. Barlat, M.-G. Lee, Application of crystal plasticity to an austenitic stainless steel. Model. Simul. Mater. Sci. Eng. (2012). https://doi.org/10.1088/0965-0393/20/2/024009 CrossRef

33.

H. Wang, P.D. Wu, C.N. Tomé, Y. Huang, A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials. J. Mech. Phys. Solids 58, 594–612 (2010). https://doi.org/10.1016/j.jmps.2010.01.004 CrossRef

34.

R.A. Lebensohn, C.N. Tomé, P.J. Maudlin, A selfconsistent formulation for the prediction of the anisotropic behavior of viscoplastic polycrystals with voids. J. Mech. Phys. Solids 52, 249–278 (2004). https://doi.org/10.1016/S0022-5096(03)00114-5 CrossRef

35.

R. Masson, M. Bornert, P. Suquet, A. Zaoui, An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals. J. Mech. Phys. Solids 48, 1203–1227 (2000). https://doi.org/10.1016/S0022-5096(99)00071-X CrossRef

36.

C.N. Tomé, R.A. Lebensohn, Manual for code Visco-Plastic Self-Consistent (VPSC) (2009)

37.

O. Engler, C.N. Tomé, M.Y. Huh, A study of through-thickness texture gradients in rolled sheets. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 31, 2299–2315 (2000). https://doi.org/10.1007/s11661-000-0146-7 CrossRef

38.

M.Y. Huh, J.H. Lee, S.H. Park, O. Engler, D. Raabe, Effect of through-thickness macro and micro-texture gradients on ridging of 17%Cr ferritic stainless steel sheet. Steel Res. Int. (2005). https://doi.org/10.1002/srin.200506098 CrossRef

39.

M.P. Miller, T.J. Turner, A methodology for measuring and modeling crystallographic texture gradients in processed alloys. Int. J. Plast. 17, 783–805 (2001). https://doi.org/10.1016/S0749-6419(00)00068-1 CrossRef

40.

D. Raabe, Inhomogeneity of the crystallographic texture in a hot-rolled austenitic stainless steel. J. Mater. Sci. 30, 47–52 (1995). https://doi.org/10.1007/BF00352130 CrossRef

41.

I. Tikhovskiy, D. Raabe, F. Roters, Simulation of earing of a 17% Cr stainless steel considering texture gradients. Mater. Sci. Eng. A 488, 482–490 (2008). https://doi.org/10.1016/j.msea.2007.11.063 CrossRef

42.

F. Bachmann, R. Hielscher, H. Schaeben, Texture analysis with MTEX—free and open source software toolbox. Solid State Phenom. 160, 63–68 (2010). https://doi.org/10.4028/www.scientific.net/SSP.160.63 CrossRef

43.

Y. Jeong, M.S. Pham, M. Iadicola, A. Creuziger, Forming limit diagram predictions using a self-consistent crystal plasticity model: a parametric study. Key Eng. Mater. 651–653, 193–198 (2015). https://doi.org/10.4028/www.scientific.net/kem.651-653.193 CrossRef

44.

J.A. Nelder, R. Mead, A simplex method for function minimization. Comput. J. 7, 308–313 (1965). https://doi.org/10.1093/comjnl/7.4.308 CrossRef

45.

E. Jones, T. Oliphant, P. Peterson, SciPy: Open source scientific tools for Python (2001). http://www.scipy.org/

46.

T.E. Oliphant, SciPy: open source scientific tools for Python. Comput. Sci. Eng. (2007). https://doi.org/10.1109/MCSE.2007.58 CrossRef

47.

C. Du, F. Maresca, M.G.D. Geers, J.P.M. Hoefnagels, Ferrite slip system activation investigated by uniaxial micro-tensile tests and simulations. Acta Mater. 146, 314–327 (2018). https://doi.org/10.1016/j.actamat.2017.12.054 CrossRef

48.

Y. Jeong, F. Barlat, M.-G. Lee, Crystal plasticity predictions of forward-reverse simple shear flow stress. Mater. Sci. Forum 702–703, 204–207 (2012). https://doi.org/10.4028/www.scientific.net/MSF.702-703.204 CrossRef

49.

H. Wang, P.D. Wu, C.N. Tomé, Y. Huang, A finite strain elastic–viscoplastic self-consistent model for polycrystalline materials. J. Mech. Phys. Solids 58, 594–612 (2010). https://doi.org/10.1016/j.jmps.2010.01.004 CrossRef

50.

F. Barlat, Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals. Mater. Sci. Eng. 91, 55–72 (1987). https://doi.org/10.1016/0025-5416(87)90283-7 CrossRef

51.

K. Bandyopadhyay, S. Basak, K.S. Prasad, M.-G. Lee, S.K. Panda, J. Lee, Improved formability prediction by modeling evolution of anisotropy of steel sheets. Int. J. Solids Struct. 156, 263–280 (2018). https://doi.org/10.1016/j.ijsolstr.2018.08.024 CrossRef

Titel: Enhancement in Viscoplastic Self-Consistent FLD Prediction Model and Its Application for Austenitic and Ferritic Stainless Steels
verfasst von: Youngung Jeong
Timo Manninen
Publikationsdatum: 23.05.2019
Verlag: The Korean Institute of Metals and Materials
Erschienen in: Metals and Materials International / Ausgabe 6/2019
Print ISSN: 1598-9623
Elektronische ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-019-00292-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2019

Effect of Ni Addition on the Morphology and Microstructure of Both Conventional Cast and Melt-Spun of Al–Si–Fe–Nb (at wt%) Alloy

Effects of the Surface Contact on the Uncertainty in Indentation Yield Strength: Surface Roughness and Angular Misalignment

Effects of Ta Content on Thermodynamic Properties and Transformation Temperatures of Shape Memory NiTi Alloy

Electrochemical and Spectroscopic Study on the Corrosion of Ti–5Al and Ti–5Al–5Cu in Chloride Solutions

Effect of Main Parameters on the Mechanical and Wear Behaviour of Functionally Graded Materials by Centrifugal Casting: A Review

Tailoring Mechanical Properties of a Low Carbon Cu-Containing Structural Steel by Two-Step Intercritical Heat Treatment

Premium Partner

Marktübersichten