European Journal of Wood and Wood Products

Editorial

Quality grading of cork stoppers based on porosity, density and elasticity

F. González-Hernández, J. R. González-Adrados, J. L. García de Ceca, M. Sánchez-González

Light microscopic analysis of Tectona grandis L.f. wood inoculated with Irpex lacteus and Phanerochaete chrysosporium

Rina D. Koyani, Kishore S. Rajput

Dimensional stability of wood–plastic composites reinforced with potassium methyl siliconate modified fiber and sawdust made from beetle-killed trees

Cheng Piao, Zhiyong Cai, Nicole M. Stark, Charles J. Monlezun

The potential of partial substitution of the wood fibre in hardboards by reject fibres from the paper recycling industry

Elena Tikhonova, Michael Lecourt, Mark Irle

Influence of wall friction on settling behavior of loose-fill cellulose insulation material dependent on different surface roughness

Andreas Böck, Sebastian Treml

Influence of veneer thickness on the properties of LVL from Paricá (Schizolobium amazonicum) plantation trees

Rafael Rodolfo de Melo, Cláudio Henrique Soares Del Menezzi

Multi-elemental analysis of wood waste using energy dispersive X-ray fluorescence (ED-XRF) analyzer

M. Fellin, M. Negri, R. Zanuttini

Influence of cross-section and knot assessment on the strength of visually graded Norway spruce

Peter Stapel, Jan-Willem G. van de Kuilen

Moment resisting connections composed of friction-welded spruce boards: experimental investigations and numerical strength prediction

Benjamin Hahn, Till Vallée, Bernhard Stamm, Yves Weinand

Moisture content (MC) and multinuclear magnetic resonance imaging (MRI) study of water absorption effect on wood treated with aminofunctional silane

Bartłomiej Mazela, Joanna Kowalczuk, Izabela Ratajczak, Kinga Szentner

Influence of heat pressure steaming (HPS) on the mechanical and physical properties of common oak wood

Thomas Volkmer, Thomas Lorenz, Philipp Hass, Peter Niemz

Outdoor weathering performance parameters of exterior wood coating systems on tropical hardwood substrates

Imke De Windt, Jan Van den Bulcke, Inge Wuijtens, Hugo Coppens, Joris Van Acker

Modeling crack propagation in wood by extended finite element method

L. P. Qiu, E. C. Zhu, J. W. G. van de Kuilen

Antimicrobial efficacy of silver nanoparticles in transparent wood coatings

Tina Künniger, Markus Heeb, Martin Arnold

Resistance based moisture content measurements on native, modified and preservative treated wood

Christian Brischke, Stefan Clemens Lampen

Selected mechanical properties of Scots pine wood from antique churches of Central Poland

Piotr Witomski, Adam Krajewski, Paweł Kozakiewicz