nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Expectations of Additive Manufacturing for the Decade 2020–2030

verfasst von : Henrique Almeida, Joel Vasco

Erschienen in: Progress in Digital and Physical Manufacturing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Additive manufacturing became one of the most important manufacturing technologies in the last three decades. The freeform building capacity plays a relevant role on industrial applications where conventional manufacturing approaches are not technically or even not economically feasible. The development of advanced materials for AM is an ongoing process, providing a new competitive edge to AM technologies. Nowadays, AM plays an important role on the production of complex geometries for products of several domains, such as aerospace, automotive, medical among others, supported by high performance materials and increased efficiency AM processes. Distributed manufacturing supply chain also became a reality, enabling new business models and bridging the gap between product designers and end-users. Additionally, high levels of manufacturing automation, incorporating AM equipment as well as smart factories are emerging. At the middle of the 2020s decade, standardisation for materials, material testing and manufacturing processes started its appearance to establish ground-breaking standards to harmonize the use of additive manufacturing technologies worldwide. Now, on the edge of a new decade, a bright future for AM technologies can be foreseen. This paper presents the AM prospects for the next decade and its prospective impact on business and industrial production models.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Additive Manufacturing Was the Answer, but What Is the Question?

Nächstes Kapitel Additive Technologies in the Medical Field for 2030

Agustí-Juan, I., Habert, G.: Environmental design guidelines for digital fabrication. J. Cleaner Prod. 142, 2780–2791 (2017). https://doi.org/10.1016/j.jclepro.2016.10.190. Elsevier LtdCrossRef

Almeida, H.A., Correia, M.S.: Sustainability impact evaluation of support structures in the production of extrusion based parts. In: Muthu, S.S., Savalani, M.M. (eds.) Handbook of Sustainability in Additive Manufacturing, vol. I, Springer (ISBN 978-981-10-0549-7), pp. 7–30 (2016). https://doi.org/10.1007/978-981-10-0549-7_2CrossRef

Almeida, H.A., Oliveira, E.S.G.: Sustainability based on biomimetic design models. In: Muthu, S.S., Savalani, M.M. (eds.) Handbook of Sustainability in Additive Manufacturing, vol. II, Springer (ISBN 978-981-10-0604-3), pp. 65–84 (2016). https://doi.org/10.1007/978-981-10-0606-7_3 CrossRef

Bourell, D.L., Leu, M.C., Rosen, D.W.: Roadmap for Additive Manufacturing: Identifying the Future of Freeform Processing. The University of Texas at Austin, Austin (2009)

Brueckner, F., Riede, M., Mueller, M., Marquardt, F., Knoll, M., Willner, R., Seidel, A., Lopez, E., Leyens, C., Beyer, E.: Fabrication of metallic multi-material components using Laser Metal Deposition. Solid Free Fabr Symp 2530–2538 (2017)

Chen, D., et al.: Direct digital manufacturing: definition, evolution, and sustainability implications’, Journal of Cleaner Production, p. 107 (2015). https://doi.org/10.1016/j.jclepro.2015.05.009CrossRef

Connor, H.J.O., Dickson, A.N., Dowling, D.P.: Evaluation of the mechanical performance of polymer parts fabricated using a production scale multi jet fusion printing process. Add. Manuf. Elsevier 22, 381–387 (2018). https://doi.org/10.1016/j.addma.2018.05.035CrossRef

Cozmei, C., Caloian, F.: Additive manufacturing flickering at the beginning of existence. Procedia Econ. Financ. 3, 457–462 (2012). https://doi.org/10.1016/S2212-5671(12)00180-3CrossRef

Debroy, T., et al.: Scripta materialia building digital twins of 3D printing machines ☆. Scripta Materialia, Acta Materialia Inc., 135, pp. 119–124 (2017)CrossRef

Desktop Metal: Exploring metal finishing methods for 3D-printed parts Metal finishing Part one. Burlington, MA, USA (2018). https://www.desktopmetal.com/white-paper/metal-finishing-methods/

Dopico, M., Gomez, A., De la Fuente, D., et al.: A vision of industry 40 from an artificial intelligence point of view. Int Conf Artif Intell (ICAI) Steer Comm world Congr Comput Sci Comput Eng Appl Comput 407–413 (2016). https://doi.org/10.1016/s0140-6736(05)63547-7CrossRef

Franchetti, M., Kress, C.: An economic analysis comparing the cost feasibility of replacing injection molding processes with emerging additive manufacturing techniques. Int. J. Adv. Manuf. Technol. 88, 2573–2579 (2017). https://doi.org/10.1007/s00170-016-8968-7CrossRef

Gao, W., et al.: The status, challenges, and future of additive manufacturing in engineering. Comput.-Aided Des. 69, 65–89 (2015). https://doi.org/10.1016/j.cad.2015.04.001. Elsevier LtdCrossRef

Gardan, J.: Additive manufacturing technologies: state of the art and trends. Addit. Manuf. Handb. Prod. Dev. Def. Ind. 7543, 149–168 (2017). https://doi.org/10.1201/9781315119106CrossRef

Gibson, I.: Is additive manufacturing a sustainable technology?”. In: Proceedings of SIM2011 Sustainable Intelligent Manufacturing, Bártolo, H., et al (Eds.), IST Press, 583–589 (2011)

Gibson, I., Rosen, D., Stucker, B.: Additive Manufacturing Technologies – 3D Printing, Rapid Prototyping and Direct Digital Manufacturing, 2nd edn. Springer, New York (2015)

Goehrke, S.A.: Evolve Additive Solutions Emerges from Stealth with 50x Faster 3D Printing for Production (2019). https://3dprint.com/208742/evolve-additive-solutions/

Grünberger, T., Domröse, R.: Optical in-process monitoring of direct metal laser sintering (DMLS). Laser Technik J. 11, 40–42 (2014)CrossRef

Guo, N., Leu, M.C.: Additive manufacturing: technology, applications and research needs. Front. Mech. Eng. 8(3), 215–243 (2013). https://doi.org/10.1007/s11465-013-0248-8CrossRef

ISO: Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock, ISO 17296-2:2015 (E), 2015, pp. 1–5 (2015)

Jackson, B.: Fraunhofer’s TwoCure technology realized in industry-ready 3D printer, 3D Printing Industry (2018a). https://3dprintingindustry.com/news/fraunhofers-twocure-technology-realized-in-industry-ready-3d-printer-141429/. Accessed 4 Mar 2019

Jackson, B.: Fraunhofer’s TwoCure technology realized in industry-ready 3D printer, 3D Printing Industry (2018b)

Kelly, B.E., et al.: Volumetric additive manufacturing via tomographic reconstruction. Science 363(6431), 1075–1079 (2019). https://doi.org/10.1126/science.aau7114CrossRef

Khoo, Z.X., et al.: 3D printing of smart materials: A review on recent progresses in 4D printing. Virtual Phys. Prototyping 10(3), 103–122 (2015). https://doi.org/10.1080/17452759.2015.1097054CrossRef

Knapp, G.L., et al.: Building blocks for a digital twin of additive manufacturing. Acta Mater. 135, 390–399 (2017). https://doi.org/10.1016/j.actamat.2017.06.039CrossRef

Koopmann, J., Voigt, J., Niendorf, T.: Additive manufacturing of a steel-ceramic multi-material by selective laser melting. Metall. Mat. Trans. B Process Metall. Mat. Process Sci. 50, 1042–1051 (2019). https://doi.org/10.1007/s11663-019-01523-1CrossRef

Lee, J.Y., An, J., Chua, C.K.: Fundamentals and applications of 3D printing for novel materials. Appl. Mat. Today 7, 120–133 (2017a). https://doi.org/10.1016/j.apmt.2017.02.004. Elsevier LtdCrossRef

Lee, J.Y., An, J., Chua, C.K.: ‘Fundamentals and applications of 3D printing for novel materials. Appl. Mat. Today 7, 120–133 (2017b). https://doi.org/10.1016/j.apmt.2017.02.004. Elsevier LtdCrossRef

Löber, L., Flache, C., Petters, R., et al.: Comparison of different post processing technologies for SLM generated 316 l steel parts. Rapid Prototyp. J. 19, 173–179 (2013). https://doi.org/10.1108/13552541311312166CrossRef

MacDonald, D., Fernández, R., Delloro, F., Jodoin, B.: Cold spraying of armstrong process titanium powder for additive manufacturing. J. Therm. Spray Technol. 26, 598–609 (2017). https://doi.org/10.1007/s11666-016-0489-2CrossRef

Masoomi, M., Thompson, S.M., Shamsaei, N.: Quality part production via multi-laser additive manufacturing. Manuf. Lett. 13, 15–20 (2017). https://doi.org/10.1016/J.MFGLET.2017.05.003. ElsevierCrossRef

Matt, D.T., Rauch, E., Dallasega, P.: Trends towards distributed manufacturing systems and modern forms for their design. Procedia CIRP 33, 185–190 (2015). https://doi.org/10.1016/j.procir.2015.06.034CrossRef

Melenka, G.W., et al.: Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures. Compos. Struct. 153, 866–875 (2016). https://doi.org/10.1016/j.compstruct.2016.07.018. Elsevier LtdCrossRef

Mendes-Felipe, C., et al.: State-of-the-art and future challenges of UV curable polymer-based smart materials for printing technologies. Adv. Mat. Technol. 1800618, 1–16 (2019). https://doi.org/10.1002/admt.201800618CrossRef

Monzón, M.D., et al.: Standardization in additive manufacturing: activities carried out by international organizations and projects. Int. J. Adv. Manuf. Technol. 76(5–8), 1111–1121 (2015). https://doi.org/10.1007/s00170-014-6334-1CrossRef

Ngo, T.D., et al.: Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos. Part B. 143, 172–196 (2018). https://doi.org/10.1016/j.compositesb.2018.02.012. ElsevierCrossRef

Ning, F., et al.: Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos. Part B: Eng. 80, 369–378 (2015). https://doi.org/10.1016/j.compositesb.2015.06.013. Elsevier LtdCrossRef

Oxman, N.: Variable property rapid prototyping. Virtual Phys. Prototyping 6(1), 3–31 (2011)CrossRef

Peels, J.: Interview with Patrik Ohldin of Open Source Metal 3D Printing Company Freemelt, 3D Print.com (2019). https://3dprint.com/233218/interview-with-patrik-ohldin-of-open-source-metal-3d-printing-company-freemelt/. Accessed 8 July 2019

Pei, E., Loh, G.H., Harrison, D., Almeida, H.A., Verona, M.D.M., Paz, R.: A study of 4D printing and functionally graded additive manufacturing. Assembly Autom. 37(2), 147–153 (2017). https://doi.org/10.1108/AA-01-2017-012CrossRef

Peters, S., et al.: Automotive manufacturing technologies – an international viewpoint. Manuf. Rev. 1, 10 (2014). https://doi.org/10.1051/mfreview/2014010CrossRef

Reeves, P.: Additive manufacturing – a supply chain wide response to economic uncertainty and environmental sustainability. In: International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia (2009)

Rickenbacher, L., Spierings, A., Wegener, K.: An integrated cost-model for selective laser melting (SLM). Rapid Prototyp. J. 19, 208–214 (2013). https://doi.org/10.1108/13552541311312201CrossRef

Riss, F., Schilp, J., Reinhart, G.: Load-dependent optimization of honeycombs for sandwich components-new possibilities by using additive layer manufacturing. Phys. Procedia 56, 327–335 (2014). https://doi.org/10.1016/j.phpro.2014.08.178CrossRef

Rohde, J., et al.: Standardised product development for technology integration of additive manufacturing. Virtual Phys. Prototyp. 14(2), 141–147 (2019). https://doi.org/10.1080/17452759.2018.1532801CrossRef

Roos, G., Fusco, M.: Strategic implications of additive manufacturing (AM) on traditional industry business models. In: Proceedings of Additive Manufacturing with Powder Metallurgy Conference, Orlando (2014)

Salonitis, K., et al.: Additive manufacturing and post-processing simulation: laser cladding followed by high speed machining. Int. J. Adv. Manuf. Technol. 85(9–12), 2401–2411 (2016). https://doi.org/10.1007/s00170-015-7989-yCrossRef

Sames, W.J., et al.: The metallurgy and processing science of metal additive manufacturing. Int. Mat. Rev. Taylor & Francis 61(5), 315–360 (2016). https://doi.org/10.1080/09506608.2015.1116649CrossRef

Sova, A., Grigoriev, S., Okunkova, A., Smurov, I.: Potential of cold gas dynamic spray as additive manufacturing technology. Int. J. Adv. Manuf. Technol. 69, 2269–2278 (2013). https://doi.org/10.1007/s00170-013-5166-8CrossRef

Sreenivasan, R., Goel, A., Bourell, D.L.: Sustainability issues in laser-based additive manufacturing, LANE 2010. Phys. Procedia 5, 81–90 (2010)CrossRef

Tekinalp, H.L., et al.: Highly oriented carbon fiber-polymer composites via additive manufacturing. Compos. Sci. Technol. 105, 144–150 (2014). https://doi.org/10.1016/j.compscitech.2014.10.009. Elsevier LtdCrossRef

Thompson, M.K., et al.: Design for additive manufacturing: trends, opportunities, considerations, and constraints. CIRP Ann. 65(2), 737–760 (2016). https://doi.org/10.1016/J.CIRP.2016.05.004. ElsevierCrossRef

Vayre, B., Vignat, F., Villeneuve, F.: Designing for additive manufacturing. Procedia CIRP 3(1), 632–637 (2012). https://doi.org/10.1016/j.procir.2012.07.108CrossRef

Watson, J.K., Taminger, K.M.B.: A decision-support model for selecting additive manufacturing versus subtractive manufacturing based on energy consumption. J. Cleaner Prod. 176, 1316–1322 (2018). https://doi.org/10.1016/j.jclepro.2015.12.009. Elsevier LtdCrossRef

Weller, C., Kleer, R., Piller, F.T.: Economic implications of 3D printing: market structure models in light of additive manufacturing revisited. Int. J. Prod. Econ. 164, 43–56 (2015). https://doi.org/10.1016/j.ijpe.2015.02.020. ElsevierCrossRef

Yang, S., Zhao, Y.F.: Additive manufacturing-enabled design theory and methodology: a critical review. Int. J. Adv. Manuf. Technol. (2015). https://doi.org/10.1007/s00170-015-6994-5CrossRef

Zegard, T., Paulino, G.H.: Bridging topology optimization and additive manufacturing. Struct. Multi. Optim. 53(1), 175–192 (2016). https://doi.org/10.1007/s00158-015-1274-4CrossRef

Titel: Expectations of Additive Manufacturing for the Decade 2020–2030
verfasst von: Henrique Almeida
Joel Vasco
Verlag: Springer International Publishing
Buch: Progress in Digital and Physical Manufacturing
Print ISBN: 978-3-030-29040-5

Electronic ISBN: 978-3-030-29041-2

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-29041-2_2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht