nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Experimental Investigation on Tensile and Fracture Behaviour of Glass Fibre-Reinforced Nanoclay/Mg–Al LDH-Based Fibre Metal Laminates

verfasst von : K. Logesh, V. K. Bupesh Raja, M. Venkatasudhahar, Hitesh Kumar Rana

Erschienen in: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nano-sized particulate materials have been influencing their effect in the modern world. In this paper, morphological conduct is been decided by using the sandwich sheets of fibre-metal laminates (FMLs) containing nanoclay Cloisite 30B and Mg–Al layered double hydro-oxide (Mg–Al LDH). Atomic force microscope (AFM) is been utilized to discover the harshness of the nano-particles. Here, the tensile test for 3, 4 and 5 wt% of layered double hydroxide (LDH)/nanoclay added FML sheets was analysed. The EDAX is employed to discover the real structure of the chosen nano-powders along the identification of the chemical composition of the nanofiller. It results that the sandwich sheet with nanoclay had smooth surface for a similar molecule measure than the LDH. The fractured surface is analysed by scanning electron microscopy (SEM) hence indicates ductile nature of fracture for modified epoxy and reinforced with glass fibre metal. Henceforth, nanoclay and LDH-based FMLs can be decided on applications in automotive applications.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Synthesis and Characterization of Al2O3–Cr2O3-Based Ceramic Composites for Artificial Hip Joint

Nächstes Kapitel Experimental Study on Micro-deburring of Micro-grooves by Micro-EDM

Logesh, K., Bupesh Raja, V.K.: Evaluation of mechanical properties of Mg-Al layered double hydroxide as a filler in epoxy-based FML composites, pp.1–19. Int. J. Adv. Manuf. Technol. (2018). https://doi.org/10.1007/s00170-018-1692-8

Logesh, K., Bupesh Raja, V.K., Sasidhar, P.: An experiment about morphological structure of Mg-Al layered double hydroxide using field emission scanning electron microscopy with EDAX analysis. Int. J. ChemTech Res. 8(3), 1104–1108 (2015). ISSN: 0974-4290

Becker, C.M., Gabbardo, A.D., Wypych, F., Amico, S.C.: Mechanical and flame-retardant properties of epoxy/Mg–Al LDH composites. Compos. A 42, 196–202 (2011)CrossRef

Klemkaite, K., Prosycevas, I., Taraskevicius, R., Khinsky, A., Kareiva, A.: Synthesis and characterization of layered double hydroxides with different cations (Mg Co, Ni, Al), decomposition and reformation of mixed metal oxides to layered structures. Cent. Eur. J. Chem. 9(2), 275–282 (2011)CrossRef

Gabr, M.H., Okumura, W., Ueda, H., Kuriyama, W., Uzawa, K., Kimpara, I.: Mechanical and thermal properties of carbon fiber/polypropylene composite filled with nano-clay. Compos. B 69, 94–100 (2015)CrossRef

da Costa, E.F.R., Skordos, A.A., Partridge, I.K., Rezai, A.: RTM processing and electrical performance of carbon nanotube modified epoxy/fibre composites. Compos. A. Appl. Sci. Manuf. 43(4), 593–602 (Apr 2012)

Becker, C.M., Dick, T.A., Wypych, F., Schrekker, H.S., Amico, S.C.: Synergetic effect of LDH and glass fiber on the properties of two- and three-component epoxy composites. Polym. Test. 31, 741–747 (2012)CrossRef

Wang, K., Chen, L., Kotaki, M., He, C.: Preparation, microstructure and thermal mechanical properties of epoxy/crude clay nanocomposites. Compos. A 38, 192–197 (2007)CrossRef

Hossen, Md.F., Hamdan, S., Rahman, Md.R., Islam, Md.S., Liew, F.K., Lai, J.C., Rahman, Md.M.: Effect of clay content on the morphological, thermo-mechanical and chemical resistance properties of propionic anhydride treated jute fiber/polyethylene/nanoclay nanocomposites. Measurement 90, 404–411 (2016)CrossRef

10.

Li, M., Gu, Y., Liu, Y., Li, Y., Zhang, Z.: Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers. Carbon 52, 109–121 (2013)CrossRef

11.

Bogner, A., Jouneau, P.H., Thollet, G., Basset, D., Gauthier, C.: A History of Scanning Electron Microscopy Developments: Towards ‘‘wet-STEM’’ Imaging, vol. 38, p. 391. Elsevier Ltd (2007)

12.

Ramesh, M., Palanikumar, K., Hemachandra Reddy, K.: Evaluation of mechanical and interfacial properties of sisal/jute/glass hybrid fiber reinforced polymer composites. Trans. Indian Inst. Met. https://doi.org/10.1007/s12666-016-0844-5CrossRef

13.

Costa, F.R., Wagenknecht, U., Heinrich, G.: LDPE/MgeAl layered double hydroxide nanocomposite: thermal and flammability properties. Polym. Degrad. Stab. 92, 1813–1823 (2007)CrossRef

14.

Wypych, F., Satyanarayana, K.G.: Functionalization of single layers and nanofibers: a new strategy to produce polymer nanocomposites with optimized properties. J. Colloid Interface Sci. 285, 532–543 (2005)CrossRef

15.

Hu, P.-Y., Hsieh, Y.-H., Chen, J.-C., Chang, C.-Y.: Characteristics of manganese-coated sand using SEM and EDAX analysis. J. Colloid Interface Sci. 272(2), 308–313 (2004)CrossRef

16.

Deva Kumar, M.L.S., Drakshayani, S., Vijaya Kumar Reddy, K.: Effect of fuel injection pressure on performance of single cylinder diesel engine at different intake manifold inclinations. Int. J. Eng. Innov. Technol. (IJEIT) 2(4) (Oct 2012). ISSN: 2277-3754

17.

Zhang, H., Gn, S.W., An, J., Xiang, Y., Yang, J.L.: Impact behaviour of GLAREs with MWCNT modified epoxy resins. Exp. Mech. 54, 83–93 (2014)CrossRef

18.

Lokhande, C.D., Sankapal, B.R., Mane, R.S., Pathan, H.M., Muller, M., Giersig, M., Ganesan, V.: XRD, SEM, AFM, HRTEM, EDAX and RBS studies of chemically deposited Sb2S3 and Sb2Se3 thin films. Appl. Surf. Sci. 193(1–4), 1–10 (2002)CrossRef

19.

Jezerska, L., Zajonc, O., Rozbroj, J., Vyletělek, J., Zegzulka, J.: Research on effect of spruce sawdust with added starch on flowability and pelletization of the material. IERI Procedia 8, 154–163 (2014)CrossRef

20.

Logesh, K., Bupesh Raja, V.K.: Formability analysis for enhancing forming parameters in AA8011/PP/AA1100 sandwich materials. Int. J. Adv. Manuf. Technol. 93(1-4), 113–120 (2017)CrossRef

21.

Ramesh, M., Nijanthan, S.: Mechanical property analysis of kenaf–glass fibre reinforced polymer composites using finite element analysis. Bull. Mater. Sci. 39(1), 147–157 (2016)CrossRef

22.

Gonzalez-Canche, N.G., Flores-Johnson, E.A., Cortes, P., Carrillo, J.G.: Evaluation of surface treatments on 5052-H32 aluminum alloy for enhancing the interfacial adhesion of thermoplastic-based fiber metal laminates. Int. J. Adhes. Adhes. (2018). https://doi.org/10.1016/j.ijadhadh.2018.01.003CrossRef

23.

Majzoobi, G.H., Morshedi, H., Farhadi, K.: The effect of aluminum and titanium sequence on ballistic limit of bi-metal 2/1 FMLs. Thin-Walled Struct. 122, 1–7 (2018)CrossRef

Titel: Experimental Investigation on Tensile and Fracture Behaviour of Glass Fibre-Reinforced Nanoclay/Mg–Al LDH-Based Fibre Metal Laminates
verfasst von: K. Logesh
V. K. Bupesh Raja
M. Venkatasudhahar
Hitesh Kumar Rana
Verlag: Springer Singapore
Buch: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
Print ISBN: 978-981-13-2717-9

Electronic ISBN: 978-981-13-2718-6

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-13-2718-6_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht