nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

23. Experimental Investigations on the Effect of Energy Interaction Durations During Micro-channeling with ECDM

verfasst von : Tarlochan Singh, Akshay Dvivedi

Erschienen in: Advances in Micro and Nano Manufacturing and Surface Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the present study, the effect of feed rate (that implies the energy interaction durations), applied voltage and pulse on time on performance characteristics of machined micro-channels was experimentally investigated. One factor at a time approach was used to perform the experiments. The width of micro-channels (WOC) and depth of penetration (DOP) were considered as the response characteristics. Additionally, the mechanism of energy interaction during fabrication of micro-channels has also been discussed with appropriate illustrations. DSO-recorded voltage signals were used to describe the discharge characteristics as well as their respective gas film behavior. During experimentation, the maximum DOP and minimum WOC were found 104 and 480 µm, respectively.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Micro-tool Fabrication and Micro-ED Milling of Titanium Nitride Alumina Ceramic–Composite

Nächstes Kapitel Influence of Chip Thickness Models on Deflection Aspects of an End Mill Cutter and a Spindle Bracket of a Miniaturized Machine Tool

Judy, J.W.: Microelectromechanical systems (MEMS): fabrication, design and applications. Smart Mater. Struct. 10, 1115–1134 (2001)CrossRef

Singh, T., Dvivedi, A.: On performance evaluation of textured tools during micro-channeling with ECDM. J. Manuf. Process. 32, 699–713 (2018)CrossRef

Singh, T., Dvivedi, A.: Developments in electrochemical discharge machining: a review on electrochemical discharge machining, process variants and their hybrid methods. Int. J. Mach. Tools Manuf. 105, 1–13 (2016)CrossRef

Pawariya, K., Dvivedi, A., Singh, T.: On performance enhancement of electrochemical discharge trepanning (ECDT) process by sonication of tool electrode. Precis. Eng. (2018). https://doi.org/10.1016/j.precisioneng.2018.08.016CrossRef

Hajian, M., Razfar, M.R., Etefagh, A.H.: Experimental study of tool bending force and feed rate in ECDM milling. Int. J. Adv. Manuf. Technol. 91(5–8), 1677–1687 (2017)CrossRef

Singh, T., Dvivedi, A.: An ecdm approach for the development of 3d microchannels on glass substrates. Int. J. Res. Eng. Technol. 5, 125–127 (2016)

Singh, T., Dvivedi, A.: A pressurized feeding approach for effective control on working gap in ECDM of borosilicate glass. Mater. Manuf. Process. 33(4), 462–473 (2018)CrossRef

Elhami, S., Razfar, M.R.: Study of the current signal and material removal during ultrasonic-assisted electrochemical discharge machining. Int. J. Adv. Manuf. Technol. 92(5–8), 1591–1599 (2017)CrossRef

Saranya, S., Nair, A., Sankar, A.R.: Experimental investigations on the electrical and 2D-machining characteristics of an electrochemical discharge machining (ECDM) process. Microsyst. Technol. 23(5), 1453–1461 (2017)CrossRef

10.

Gupta, P.K., Dvivedi, A., Kumar, P.: Effect of pulse duration on quality characteristics of blind hole drilled in glass by ECDM. Mater. Manuf. Process. 31(13), 1740–1748 (2016)CrossRef

Titel: Experimental Investigations on the Effect of Energy Interaction Durations During Micro-channeling with ECDM
verfasst von: Tarlochan Singh
Akshay Dvivedi
Verlag: Springer Singapore
Buch: Advances in Micro and Nano Manufacturing and Surface Engineering
Print ISBN: 978-981-329-424-0

Electronic ISBN: 978-981-329-425-7

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-32-9425-7_23

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht