nach oben

Strength of Materials

Erschienen in:

22.03.2016

Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes Under Various Loads

verfasst von: G. H. Li, W. J. Wang, Z. J. Jing, X. C. Ma, L. B. Zuo

Erschienen in: Strength of Materials | Ausgabe 1/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, reinforced thermoplastic pipes (RTP) were studied under various loads. A total of five groups of specimens were designed to study the mechanical properties of RTPs under internal pressure, bending, a combination of internal pressure and bending moment, external pressure, and tension. This study obtained the bursting pressure of RTPs under internal pressure, the minimum bending radius under the bending moment, and the failure pressure under external pressure. At the same time, the mechanical properties of RTPs under various loads were analyzed using the finite element analysis. Analytical results agree well with the experimental ones. The finite element model established in this paper can be used for further research on the mechanical properties of RTPs.

Vorheriger Artikel Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steam Power Plants

Nächster Artikel The Sources and Affecting Factors of Creep Threshold Stress of Magnesium-Based Composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Xia, H. Takayanagi, and K. Kemmochi, “Analysis of multi-layered filament-wound composite pipes under internal pressure,” Compos. Struct., 53, 483–491 (2001).CrossRef

M. Xia, H. Takayanagi, and K. Kemmochi, “Bending behavior of filament-wound fiber-reinforced sandwich pipes,” Compos. Struct., 56, 201–210 (2002).CrossRef

C. S. Chouchaoui and O. O. Ochoa, “Similitude study for a laminated cylindrical tube under tensile, torsion, bending, internal and external pressure. Part I: Governing equations,” Compos. Struct., 44, 221–229 (1999).CrossRef

C. S. Chouchaoui and O. O. Ochoa, “Similitude study for a laminated cylindrical tube under tensile, torsion, bending, internal and external pressure. Part II: Scale models,” Compos. Struct., 44, 231–236 (1999).CrossRef

J. Q. Tarn and Y. M. Wang, “Laminated composite tubes under extension, torsion, bending, shearing and pressuring: a state space approach,” Int. J. Solids Struct., 38, 9053–9075 (2011).CrossRef

A. L. Newberry, “Advanced software for stress analysis of composite pipe systems,” Reinforced Plastics, 46, No. 10, 46–48 (2002).CrossRef

Y. Zhang, X. M. Fan, and D. Kong, “Study on the mechanics model of multi-layered tube,” J. Nanjing Univ. Sci. Technol., 23, No. 5, 446–449 (1999).

Zh. M. Ren, D. Y. Ren, K. L. Liu, and J. T. Liu, “The finite element analysis of steel wir frame reinforced plastic pipes,” China Plastics, 16, No. 11, 40–43 (2002).

X. P. Cheng, Analysis and Study on Properties of Steel Framed Polyethylene Plastic Pipes, Master’s Thesis, Zhejiang University, Hangzhou (2003).

10.

W. Z. Yang, G. Q. Yang, and c. Yang, “Mechanics analysis on swaging process of hose assembly,” Process Equip. Piping, 41, No. 2, 60–62 (2004).

11.

C. A. GargiuIo, M. A. Marchetti, and A. A. Rizzo, “Prediction of failure envelopes of composite tubes subjected to biaxial loadings,” Acta Astronaut., 39, No. 5, 355–368 (1996).CrossRef

12.

Y. W. Yang, Y. Zhen, and G. Sh. Qiu, “Stress analysis and strength check of FRP/PVC composite pipe,” J. Nanjing Univ. Sci. Technol., 19, No. 4, 38l–384 (1995).

13.

Y. E. Zhang, X. M. Fan, and D. Kong, “Theoretical calculation of strength of multi-layered cylinder,” J. Ballistics, 14, No. 1, 54–57 (2002).

14.

T. Nitulescu and S. Talu, Applications of Descriptive Geometry and Computer Aided Design in Engineering Graphics, Risoprint Publishing House, Cluj-Napoca, Romania (2001), ISBN 973-656-102-X.

15.

S. Talu and C. Racocea, Axonometric Representations with Applications in Technique, MEGA Publishing House, Cluj-Napoca, Romania (2007), ISBN 978-973-7867-98-8.

Titel: Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes Under Various Loads
verfasst von: G. H. Li
W. J. Wang
Z. J. Jing
X. C. Ma
L. B. Zuo
Publikationsdatum: 22.03.2016
Verlag: Springer US
Erschienen in: Strength of Materials / Ausgabe 1/2016
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI: https://doi.org/10.1007/s11223-016-9752-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2016

Design Optimization for Shear Key on the TF Coil Structure of the KSTAR Tokamak

Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy

Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steam Power Plants

Compression Deformation Behavior and Processing Map of Pure Copper

Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling Alt

Preface

Premium Partner

Marktübersichten