Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Progress in Additive Manufacturing
Erschienen in: Progress in Additive Manufacturing 4/2021

19.06.2021 | Full Research Article

Experimental study of a novel layer deposition technique and its effect on anisotropic behavior of wire arc additively manufactured steel parts

verfasst von: Esraa S. Abdelall, Abdullah F. Al-Dwairi, Esraa Ashour, Mohamed Eldakroury

Erschienen in: Progress in Additive Manufacturing | Ausgabe 4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This work investigates the possibility of reducing the anisotropic behavior of wire arc additively manufactured (WAAM) parts by a new layer deposition technique. An experiment was carried out in which specimens were printed using AWS E6013 low carbon steel electrodes. In printing the specimens, sets of layers were deposited bottom-up (along Z-axis) at different inclination angles (namely, 0˚, ± 15˚, ± 30˚ and ± 45˚) with respect to X-axis of substrate XZ-plane. Results show that the proposed technique does reduce anisotropic behavior of printed parts when deposition angles of ± 30˚ and ± 45˚ are used. Parts printed with layer sets deposited at ± 45˚ inclinations showed least anisotropy and highest tensile strength, but they also had longer building times as compared with the other specimens.
Vorheriger Artikel Modelling of the capillarity effect for cylindrical shapes in Multi Jet Fusion technology
Nächster Artikel Review on additive hybrid- and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potential

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928CrossRef
2.
Paskual A, Álvarez P, Suárez A (2018) Study on arc welding processes for high deposition rate additive manufacturing. Procedia Cirp 68:358–362CrossRef
3.
Cyr E, Lloyd A, Mohammadi M (2018) Tension-compression asymmetry of additively manufactured Maraging steel. J Manuf Process 35:289–294
4.
Mellor S, Hao L, Zhang D (2014) Additive manufacturing: a framework for implementation. Int J Prod Econ 149:194–201CrossRef
5.
Cunningham CR, Flynn JM, Shokrani A, Dhokia V, Newman ST (2018) Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit Manuf 22:672–686
6.
Youheng F, Guilan W, Haiou Z, Liye L (2017) Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel. Int J Adv Manuf Technol 91:301–313CrossRef
7.
Yehorov Y, da Silva LJ, Scotti A (2019) Exploring the use of switchback for mitigating homoepitaxial unidirectional grain growth and porosity in WAAM of aluminium alloys. Int J Adv Manuf Technol 104:1581–1592CrossRef
8.
Sun R, Li L, Zhu Y, Guo W, Peng P, Cong B, Sun J, Che Z, Li B, Guo C (2018) Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening. J Alloys Compd 747:255–265CrossRef
9.
Xu X, Ganguly S, Ding J, Dirisu P, Martina F, Liu X, Williams SW (2019) Improving mechanical properties of wire + arc additively manufactured maraging steel through plastic deformation enhanced aging response. Mater Sci Eng A Struct Mater 747:111–118CrossRef
10.
Colegrove PA, Donoghue J, Martina F, Gu J, Prangnell P, Hönnige J (2017) Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components. Scr Mater 135:111–118CrossRef
11.
Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P (2016) Wire + Arc additive manufacturing. Mater Sci Technol (United Kingdom) 32(7):641–647CrossRef
12.
Geng H, Li J, Xiong J, Lin X, Zhang F (2017) Geometric limitation and tensile properties of wire and arc additive manufacturing 5A06 aluminum alloy parts. J Mater Eng Perform 26:621–629CrossRef
13.
Wang L, Xue J, Wang Q (2019) Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel. Mater Sci Eng A 751:183–190CrossRef
14.
Zhang C, Li Y, Gao M, Zeng X (2018) Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source. Mater Sci Eng A 711:415–423CrossRef
15.
Zhu Y, Tian X, Li J, Wang H (2015) The anisotropy of laser melting deposition additive manufacturing Ti–6.5 Al–3.5 Mo–1.5 Zr–0.3 Si titanium alloy. Mater Des 67:538–542CrossRef
16.
Zhang Q, Chen J, Zhao Z, Tan H, Lin X, Huang W (2016) Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy. Mater Sci Eng A 673:204–212CrossRef
17.
Caballero A, Ding J, Ganguly S, Williams S (2019) Wire + Arc Additive Manufacture of 17–4 PH stainless steel: effect of different processing conditions on microstructure, hardness, and tensile strength. J Mater Process Technol 268:54–62CrossRef
18.
Shen C, Mu G, Hua X, Li F, Luo D, Ji X, Zhang C (2019) Influences of postproduction heat treatments on the material anisotropy of nickel-aluminum bronze fabricated using wire-arc additive manufacturing process. Int J Adv Manuf Technol 103:3199–3209CrossRef
19.
Thompson MK et al (2016) Design for Additive Manufacturing: trends, opportunities, considerations, and constraints. CIRP Ann Manuf Technol 65(2):737–760CrossRef
20.
Nancharaiah T (2011) Optimization of process parameters in FDM process using design of experiments. Int J Emerg Technol 2(1):100–102
21.
22.
Vahabli E, Rahmati S (2017) Improvement of FDM parts’ surface quality using optimized neural networks–medical case studies. Rapid Prototyp. J. 23(4):825–842CrossRef
23.
Nuñez PJ, Rivas A, García-Plaza E, Beamud E, Sanz-Lobera A (2015) Dimensional and surface texture characterization in fused deposition modelling (FDM) with ABS plus. Procedia Eng 132:856–863CrossRef
24.
Garg PK, Singh R, Ahuja IPS (2017) Multi-objective optimization of dimensional accuracy, surface roughness and hardness of hybrid investment cast components. Rapid Prototyp J 23(5):845–857CrossRef
25.
Khoshkhoo A, Carrano AL, Blersch DM (2018) Effect of surface slope and build orientation on surface finish and dimensional accuracy in material jetting processes. Procedia Manuf. 26:720–730CrossRef
26.
Klingaa JH, Dahmen CG, Baier T, Mohanty S, Hattel JH (2019) Build orientation effects on the roughness of SLM channels. In: In joint special interest group meeting between euspen and ASPE advancing precision in additive manufacturing, pp. 111–114
27.
Fatimatuzahraa AW, Farahaina B, Yusoff WAY (2011) The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts. In: ISBEIA 2011–2011 IEEE Symposium on Business, Engineering and Industrial Applications, pp 22–27
28.
Armillotta A, Carcallaro M (2017) Edge quality in fused deposition modeling: I. Definition and analysis. Rapid Prototyp J 23(6):1079–1087CrossRef
29.
Hill N, Haghi M (2014) Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate. Rapid Prototyp J. 20(3):221–227CrossRef
30.
Domingo-Espin GR, Puigoriol-Forcada JM, Garcia-Granada AA, Lluma J, Borros S (2015) Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts. Mater Des 83:670–677CrossRef
31.
Cantrell JT, Rohde S, Damiani D, Gurnani R, DiSandro L, Anton J, Young A, Jerez A, Steinbach D, Kroese C (2017) Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts.". Rapid Prototyp. J. 23(4):811–824CrossRef
32.
Deng X, Zeng Z, Peng B, Yan S, Ke W (2018) Mechanical properties optimization of poly-ether-ether-ketone via fused deposition modeling. Materials (Basel) 11(2):216CrossRef
33.
Afrose MF, Masood SH, Iovenitti P, Nikzad M, Sbarski I (2016) Effects of part build orientations on fatigue behaviour of FDM-processed PLA material. Prog Addit Manuf 1(1–2):21–28CrossRef
34.
Keleş Ö, Blevins CW, Bowman KJ (2017) Effect of build orientation on the mechanical reliability of 3D printed ABS. Rapid Prototyp J 23(2):320–328CrossRef
35.
Croccolo D, De Agostinis M, Fini S, Olmi G, Vranic A, Ciric-Kostic S (2016) Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine. Fatigue Fract Eng Mater Struct 39(5):637–647CrossRef
36.
Bogojević S, Ćirić-Kostić A, Vranić G, Olmi G, Croccolo D (2020) Influence of the orientation of steel parts produced by DMLS on the fatigue behavior. In: Lecture Notes in Mechanical Engineering, pp 294–305
37.
Karlsson P, Pejryd L, Oikonomou C (2017) Factors influencing mechanical properties of additive manufactured thin-walled parts. In: Proceedings Euro PM 2017: international powder metallurgy congress and exhibition
38.
Mortazavian S, Fatemi A (2015) Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites. Compos Part B Eng 72:116–129CrossRef
Metadaten
Titel
Experimental study of a novel layer deposition technique and its effect on anisotropic behavior of wire arc additively manufactured steel parts
verfasst von
Esraa S. Abdelall
Abdullah F. Al-Dwairi
Esraa Ashour
Mohamed Eldakroury
Publikationsdatum
19.06.2021
Verlag
Springer International Publishing
Erschienen in
Progress in Additive Manufacturing / Ausgabe 4/2021
Print ISSN: 2363-9512
Elektronische ISSN: 2363-9520
DOI
https://doi.org/10.1007/s40964-021-00201-6

Weitere Artikel der Ausgabe 4/2021

Progress in Additive Manufacturing 4/2021 Zur Ausgabe

Full Research Article

The effects of printing parameters on quality, strength, mass, and processing time of polylactic acid specimens produced by additive manufacturing

Full Research Article

Voxel and stereolithographic digital design framework in additive manufacturing: effects in a PolyJet printing process and relevant digital solutions

Full Research Article

Additive manufacturing of Ti-6Al-4V alloy by metal fused filament fabrication (MF3): producing parts comparable to that of metal injection molding

Full Research Article

Intelligent orientation of parts based on defect prediction in Multi Jet Fusion process

Editorial

Editorial PIAM November 2021

Review Article

Review on additive hybrid- and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potential

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise