nach oben

Optical and Quantum Electronics

Erschienen in:

01.02.2021

Fibre optic sensors for the monitoring of rotating electric machines: a review

verfasst von: Kun Shang, Yaping Zhang, Michael Galea, Vladimir Brusic, Serhiy Korposh

Erschienen in: Optical and Quantum Electronics | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Accurate and efficient monitoring of electrical machine (EM) operating parameters, including temperature, mechanical vibration, torque and rotating speed and others that can indicate the EM health conditions is becoming ever more important in the world of electrical drives. The traditional methodology of one sensor per parameter can be theoretically replaced by a “one sensor measures all” technology, which can be achieved through the use of fibre-optic sensors (FOS). In this paper, several FOSs, which use different optical sensing principles for multiple physical parameter measurements of EMs, are reviewed. This paper also provides an insight into the major developments, and discusses the engineering challenges of FOS used for EM monitoring over the last few decades, and compares the advanced features of FOS with those of conventional sensors in use. Finally, a novel FOS-EM observer system scheme employing the Fibre Bragg Grating technique for multi-parameter monitoring of EM health is proposed, after discussion of the preceding industrial and academic FOS cases for EM applications.

Vorheriger Artikel Fuzzy queue based switch efficiency measures for optical network

Nächster Artikel Tunable properties of omnidirectional band gap based on photonic quasicrystals containing superconducting material

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ágoston, K.: Vibration detection of the electrical motors using strain gauges. Procedia Technol. (2016). https://doi.org/10.1016/j.protcy.2016.01.037CrossRef

Arregui, F.J., et al.: Unbalance and harmonics detection in induction motors using an optical fiber sensor. IEEE Sens. J. 6(3), 605–612 (2006). https://doi.org/10.1109/JSEN.2006.874441ADSCrossRef

Barczak, K., et al.: Optical fibre magnetic field sensors for monitoring of the state of work of electric motors. Acta Phys. Pol. A 116(3), 250–253 (2009). https://doi.org/10.12693/APhysPolA.116.250ADSCrossRef

Barnish, T.J., Muller, M.R., Kasten, D.J.: Motor maintenance: a survey of techniques and results. In: Saratoga Springs, NY (US), pp. 287–297 (1997)

Basumallick, N., et al.: Fiber Bragg grating accelerometer with enhanced sensitivity. Sens. Actuators A Phys. 173(1), 108–115 (2012). https://doi.org/10.1016/j.sna.2011.10.026CrossRef

Bazurto, A.J., Quispe, E.C., Mendoza, R.C.: Causes and failures classification of industrial electric motor. In: Proceedings of the 2016 IEEE Andescon, Andescon 2016 (2017). https://doi.org/10.1109/ANDESCON.2016.7836190.

Beihoff, B.: Survey of torque transduction methodologies for industrial applications. In: IEEE Conference Record of Annual Pulp and Paper Industry Technical Conference, pp. 220–229 (1996). https://doi.org/10.1109/papcon.1996.536001

Berkoff, T.A., Kersey, A.D.: Experimental demonstration of a fiber bragg grating accelerometer. IEEE Photonics Technol. Lett. 8(12), 1677–1679 (1996). https://doi.org/10.1109/68.544716ADSCrossRef

Binu, S., Mahadevan Pillai, V.P., Chandrasekaran, N.: Fibre optic displacement sensor for the measurement of amplitude and frequency of vibration. Opt. Laser Technol. 39(8), 1537–1543 (2007). https://doi.org/10.1016/j.optlastec.2006.12.008ADSCrossRef

Blake, J.N., Rose, A.H.: Fiber-optic current transducer optimized for power metering applications. In: Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, vol. 1, pp. 405–408 (2003). https://doi.org/10.1109/tdc.2003.1335257

Boiarski, A.A., et al.: Temperature measurements in power plant equipment using distributed fiber optic sensing. IEEE Trans. Power Deliv. 10(4), 1771–1778 (1995). https://doi.org/10.1109/61.473381CrossRef

Brinner, T.R., McCoy, R.H., Kopecky, T.: Induction versus permanent-magnet motors for electric submersible pump field and laboratory comparisons. IEEE Trans. Ind. Appl. 50(1), 174–181 (2014). https://doi.org/10.1109/TIA.2013.2288203CrossRef

Budinski, V., Donlagic, D.: Fiber-optic sensors for measurements of torsion, twist and rotation: a review. Sensors (Switzerland) 17(3), 1–29 (2017). https://doi.org/10.3390/s17030443CrossRef

Burns, W.K.: Optical Fiber Rotation Sensing, Optical Fiber Rotation Sensing. Academic Press, Cambridge (1994). https://doi.org/10.1016/c2009-0-22412-3CrossRef

Burt, C.M., et al.: Electric motor efficiency under variable frequencies and loads. J. Irrig. Drain. Eng. 134(2), 129–136 (2008). https://doi.org/10.1061/(ASCE)0733-9437(2008)134:2(129)CrossRef

Chang, H.Y., et al.: Rotational speed sensors based on a fiber Bragg grating. In: 2017 Opto-Electronics and Communications Conference, OECC 2017 and Photonics Global Conference, PGC 2017, 2017-Novem, pp. 1–3 (2017). https://doi.org/10.1109/OECC.2017.8114863

Chen, Y., et al.: Lubricant film thickness measurement using fiber-optic Michelson Interferometer and fiber-optic displacement sensor. In: 2009 IEEE International Conference on Information and Automation, ICIA 2009, pp. 951–956 (2009). https://doi.org/10.1109/ICINFA.2009.5205055

Chen, W., et al.: A passive eddy current damper for vibration suppression of a force sensor. J. Phys. D Appl. Phys. (2013). https://doi.org/10.1088/0022-3727/46/7/075001CrossRef

Conforti, G., et al.: Fiber optic vibration sensor for remote monitoring in high power electric machines. Appl. Opt. 28(23), 5158 (1989). https://doi.org/10.1364/ao.28.005158ADSCrossRef

Corres, J.M., et al.: Vibration monitoring in electrical engines using an in-line fiber etalon. Sens. Actuators A 132(2), 506–515 (2006). https://doi.org/10.1016/j.sna.2006.02.026CrossRef

Cui, K., et al.: ‘FPGA-based interrogation controller with optimized pipeline architecture for very large-scale fiber-optic interferometric sensor arrays. Opt. Lasers Eng. 121, 389–396 (2019). https://doi.org/10.1016/j.optlaseng.2019.04.026CrossRef

Culshaw, B.: The optical fibre Sagnac interferometer: an overview of its principles and applications. Meas. Sci. Technol. (2006). https://doi.org/10.1088/0957-0233/17/1/R01CrossRef

Cusano, A., et al.: Dynamic strain measurements by fibre Bragg grating sensor. Sens. Actuators A 110(1–3), 276–281 (2004). https://doi.org/10.1016/j.sna.2003.10.031CrossRef

Dakin, J.P., et al.: Distributed optical fibre Raman temperature sensor using a semiconductor light source and detector. Electron. Lett. 21(13), 569–570 (1985). https://doi.org/10.1049/el:19850402ADSCrossRef

de Almeida, A.T., et al.: Policy options to promote energy efficient electric motors and drives in the EU. Renew. Sustain. Energy Rev. 74(January), 1275–1286 (2017). https://doi.org/10.1016/j.rser.2017.01.112CrossRef

De Morais Sousa, K., et al.: Determination of temperature dynamics and mechanical and stator losses relationships in a three-phase induction motor using fiber Bragg grating sensors. IEEE Sens. J. 12(10), 3054–3061 (2012). https://doi.org/10.1109/JSEN.2012.2210203ADSCrossRef

De Morais Sousa, K., et al.: ‘Validation of thermal and electrical model for induction motors using fiber Bragg gratings. Meas. J. Int. Meas. Confed. 46(6), 1781–1790 (2013). https://doi.org/10.1016/j.measurement.2013.02.008CrossRef

de Morais Sousa, K., et al.: Fiber Bragg grating temperature sensors in a 6.5-MW generator exciter bridge and the development and simulation of its thermal model. Sensors (Switzerland) 14(9), 16651–16663 (2014). https://doi.org/10.3390/s140916651CrossRef

Dreyer, U.J., et al.: Quasi-distributed optical fiber transducer for simultaneous temperature and vibration sensing in high-power generators. IEEE Sens. J. 18(4), 1547–1554 (2018). https://doi.org/10.1109/JSEN.2017.2787681ADSCrossRef

Duncan, R.G., Childers, B.A., Rajendran, V.: High-spatial-resolution temperature monitoring of an industrial motor using a distributed fiber optic sensing technique. Smart Struct. Mater. 2004 Smart Sens. Technol. Meas. Syst. 5384, 258 (2004). https://doi.org/10.1117/12.540130ADSCrossRef

Eickhoff, W., Ulrich, R.: Optical frequency domain reflectometry in single-mode fiber. Appl. Phys. Lett. 39(9), 693–695 (1981). https://doi.org/10.1063/1.92872ADSCrossRef

Emadi, A., Berthold, F.: Advanced Electric Drive Vehicles. CRC Press, Boca Raton (2017)

EMSA: Life Cycle Cost Analyses (2019). https://www.motorsystems.org/task-b/life-cycle-cost. Accessed 29 July 2019

Fabian, M., et al.: Comprehensive monitoring of electrical machine parameters using an integrated fiber Bragg grating-based sensor system. J. Lightw. Technol. 36(4), 1046–1051 (2018). https://doi.org/10.1109/JLT.2017.2771143ADSCrossRef

FIBRECORE.Ltd: Pure Silica Core SM Fiber Product specification (2018). https://www.fibercore.com/product/pure-silica-core-sm-fiber

Finley, W.R., Hodowanec, M.M., Holter, W.G.: An analytical approach to solving. In: IEEE PCIC, (Paper No PCIC-99-20), pp. 217–232 (1999)

Finley, W., Loutfi, M., Sauer, B.J.: Motor vibration problems understanding and identifying. In: IEEE Cement Industry Technical Conference (Paper), pp. 1–20 (2013). https://doi.org/10.1109/CITCON.2013.6525282

FOA ^TM-Series Fiber Optic Accelerometers User’s Manual (2015). www.vibrosystm.com. Accessed 4 Nov 2019

Fusiek, G., Niewczas, P., McDonald, J.R.: Feasibility study of the application of optical voltage and current sensors and an arrayed waveguide grating for aero-electrical systems. Sens. Actuators A 147(1), 177–182 (2008). https://doi.org/10.1016/j.sna.2008.05.006CrossRef

Galea, M., Giangrande, P., Madonna, V.: Reliability-oriented design of electrical machines: the design process for machines. Insulation Systems MUST Evolve. IEEE, pp. 20–28 (2020)

Galeti, J.H., Kitano, C., Connelly, M.J.: Improved synthetic-heterodyne Michelson interferometer vibrometer using phase and gain control feedback. Appl. Opt. 54(35), 10418 (2015). https://doi.org/10.1364/ao.54.010418ADSCrossRef

Gangopadhyay, T.K.: Prospects for Fibre Bragg gratings and Fabry-Perot interferometers in fibre-optic vibration sensing. Sens. Actuators A 113(1), 20–38 (2004). https://doi.org/10.1016/j.sna.2004.01.043CrossRef

Gao, Z., et al.: A sensorless rotor temperature estimator for induction machines based on current harmonic spectral estimation scheme. In: EPE-PEMC 2006: 12th International Power Electronics and Motion Control Conference, Proceedings, vol. 55(1), pp. 431–437 (2007). https://doi.org/10.1109/EPEPEMC.2006.283200

García, I., et al.: Optical fiber sensors for aircraft structural health monitoring. Sensors (Switzerland) 15(7), 15494–15519 (2015). https://doi.org/10.3390/s150715494CrossRef

Gerada, D., et al.: High-speed electrical machines: technologies, trends, and developments. IEEE Trans. Ind. Electron. 61(6), 2946–2959 (2014). https://doi.org/10.1109/TIE.2013.2286777CrossRef

Ghatak, K. T. A. (2007) Optical fiber sensors 14.1. In: Fiber optic essentials, 1st edn. Wiley, pp. 221–235. https://doi.org/10.1002/9780470152560

Giurgiutiu, V.: Chapter 7—fiber-optic sensors, structural health monitoring of aerospace composites (2016). https://doi.org/10.1016/B978-0-12-409605-9.00007-6.

Habel, J., et al.: Femtosecond FBG written through the coating for sensing applications. Sensors (Switzerland) 17(11), 1–11 (2017). https://doi.org/10.3390/s17112519CrossRef

Haramoni, N., et al.: Hybrid wavelength-time-domain interrogation system for multiplexed fiber Bragg sensors using a strain-tuned erbium-doped fiber laser. IEEE Sens. J. 8(7), 1061–1066 (2008). https://doi.org/10.1109/JSEN.2008.926175ADSCrossRef

Hashish, B.E., et al.: Vibration diagnostic challenges (2017)

He, H., et al.: Multiple vibrations measurement using phase-sensitive OTDR merged with Mach-Zehnder interferometer based on frequency division multiplexing. Opt. Express 24(5), 4842 (2016). https://doi.org/10.1364/oe.24.004842ADSCrossRef

He, F., Xie, G., Luo, J.: Electrical bearing failures in electric vehicles. Friction 8(1), 4–28 (2020). https://doi.org/10.1007/s40544-019-0356-5CrossRef

Hu, D., et al.: Synchronous interrogation of multiple FBG sensors using multi-wavelength parallel swept light source. In: Liu, T., Jiang, S. (eds.) Advanced Sensor Systems and Applications VIII, p. 44. SPIE, Bellingham (2018). https://doi.org/10.1117/12.2327121CrossRef

Huang, J., et al.: ‘Real-time measurement of temperature field in heavy-duty machine tools using fiber Bragg grating sensors and analysis of thermal shift errors. Mechatronics 31, 16–21 (2015). https://doi.org/10.1016/j.mechatronics.2015.04.004CrossRef

Hubner, L., et al.: Monitoring of winding overhang vibrations on large synchronous motors. In: 11th Petroleum and Chemical Industry Conference Europe Electrical and Instrumentation Applications, PCIC (2014). https://doi.org/10.1109/PCICEurope.2014.6900061

Hudon, C., et al.: ‘Determination of stator temperature profile using distributed sensing’, 2013 IEEE Electrical Insulation Conference. EIC 2013(June), 191–195 (2013). https://doi.org/10.1109/EIC.2013.6554231CrossRef

Hudon, C., et al.: Rotor temperature monitoring using fiber Bragg gratings. In: 2016 IEEE Electrical Insulation Conference (EIC). IEEE, pp. 456–459 (2016a). https://doi.org/10.1109/EIC.2016.7548636

Hudon, C., et al.: Rotor temperature monitoring using fiber Bragg gratings. In: 34th Electrical Insulation Conference, EIC 2016. IEEE, (June), pp. 456–459 (2016b). https://doi.org/10.1109/EIC.2016.7548636

Hughes, A., Drury, B.: Electric Motors and Drives: Fundamentals, Types and Applications. Newnes, Oxford (2013)

IEC: IEC 60034:2019 SER (2019). https://webstore.iec.ch/publication/62415#additionalinfo. Accessed 4 Nov 2019

IEC: IEC 60085 Electrical insulation-Thermal evaluation and designation Isolation (2007). http://webstore.iec.ch. Accessed 4 Nov 2019

IEEE Industry Applications Society: IEEE Standard 841 (2009)

Jankowski, T.A., et al.: Development and validation of a thermal model for electric induction motors. IEEE Trans. Ind. Electron. 57(12), 4043–4054 (2010). https://doi.org/10.1109/TIE.2010.2043044CrossRef

Javied, T., et al.: A study on electric energy consumption of manufacturing companies in the German industry with the focus on electric drives. Procedia CIRP 41, 318–322 (2016)CrossRef

Jia, P.G., et al.: An active temperature compensated fiber-optic fabry-perot accelerometer system for simultaneous measurement of vibration and temperature. IEEE Sens. J. 13(6), 2334–2340 (2013). https://doi.org/10.1109/JSEN.2013.2251879ADSCrossRef

Kafafi, Z.H., et al.: The role of photonics in energy. J. Photonics Energy (2015). https://doi.org/10.1117/1.JPE.5.050997CrossRef

Kersey, A.D.: Distributed and multiplexed fiber optic sensors. In: Fiber Optic Sensors: An Introduction for Engineers and Scientists: Second Edition, pp. 277–314 (2011). https://doi.org/10.1002/9781118014103.ch11

Kirkendall, C.K., Dandridge, A.: Overview of high performance fibre-optic sensing. J. Phys. D Appl. Phys. (2004). https://doi.org/10.1088/0022-3727/37/18/R01CrossRef

Kruger, L., et al.: Non-contact torsion sensor using fibre Bragg gratings. Meas. Sci. Technol. 15(8), 1448–1452 (2004). https://doi.org/10.1088/0957-0233/15/8/002ADSCrossRef

Leal-Junior, A., et al.: Material features based compensation technique for the temperature effects in a polymer diaphragm-based FBG pressure sensor. Opt. Express 26(16), 20590 (2018). https://doi.org/10.1364/oe.26.020590ADSCrossRef

Lee, J.M., Hwang, Y.: A novel online rotor condition monitoring system using fiber Bragg grating (FBG) sensors and a rotary optical coupler. Meas. Sci. Technol. (2008). https://doi.org/10.1088/0957-0233/19/6/065303CrossRef

Lefèvre, H.C.: The fiber-optic gyroscope, a century after Sagnac’s experiment: the ultimate rotation-sensing technology? C R Phys. 15(10), 851–858 (2014). https://doi.org/10.1016/j.crhy.2014.10.007ADSCrossRef

Leite, R.C., et al.: Analysis of thermo-mechanical stress in fiber Bragg grating used for hydro-generator rotor temperature monitoring. J. Microw. Optoelectron. Electromagn. Appl. 16(2), 445–459 (2017). https://doi.org/10.1590/2179-10742017v16i2818CrossRef

Li, X., Kan, E.C.: A wireless low-range pressure sensor based on P(VDF-TrFE) piezoelectric resonance. Sens. Actuators A Phys. 163(2), 457–463 (2010). https://doi.org/10.1016/j.sna.2010.08.022CrossRef

Li, T., et al.: Fiber Bragg grating sensing-based online torque detection on coupled bending and torsional vibration of rotating shaft. IEEE Sens. J. 17(7), 1199–2007 (2017). https://doi.org/10.1109/JSEN.2017.2669528CrossRef

Linessio, R.P., et al.: Induction motors vibration monitoring using a biaxial optical fiber accelerometer. IEEE Sens. J. 16(22), 8075–8082 (2016). https://doi.org/10.1109/JSEN.2016.2604850ADSCrossRef

Liu, L., et al.: Temperature-independent FBG pressure sensor with high sensitivity. Opt. Fiber Technol. 13(1), 78–80 (2007). https://doi.org/10.1016/j.yofte.2006.09.001ADSCrossRef

Liu, Y., Jiang, H., Yuan, L.: Multi-ring compound fiber optic rotation measuring approach based on the Rayleigh backscattering. In: Proceedings of 2012 International Conference on Measurement, Information and Control, MIC 2012. IEEE, 1(Mic), pp. 107–112 (2012). https://doi.org/10.1109/MIC.2012.6273310.

Lopez-Higuera, J.M., et al.: New low-cost fiber optic accelerometer system for stator winding monitoring of hydroelectric generating machines. In: Proceedings of SPIE—The International Society for Optical Engineering, pp. 510–515 (1996). https://doi.org/10.1117/12.248675

López-Higuera, J.M., Morante, M.A., Cobo, A.: Simple low-frequency optical fiber accelerometer with large rotating machine monitoring applications. J. Lightw. Technol. 15(7), 1120–1129 (1997). https://doi.org/10.1109/50.596957ADSCrossRef

Lopez-Perez, D., Antonino-Daviu, J.: Application of infrared thermography to failure detection in industrial induction motors: case stories. IEEE Trans. Ind. Appl. 53(3), 1901–1908 (2017). https://doi.org/10.1109/TIA.2017.2655008CrossRef

Lu, Y., et al.: Distributed vibration sensor based on coherent detection of phase-OTDR. J. Lightw. Technol. 28(22), 3243–3249 (2010). https://doi.org/10.1109/JLT.2010.2078798ADSCrossRef

Machine Design: Basics of rotary encoders: overview and new technologies | Sensors content from Machine Design (2014). https://www.machinedesign.com/sensors/basics-rotary-encoders-overview-and-new-technologies-0. Accessed 22 Oct 2019

Madonna, V., et al.: Thermal overload and insulation aging of short duty cycle, aerospace motors. IEEE Trans. Ind. Electron. 67(4), 2618–2629 (2020). https://doi.org/10.1109/TIE.2019.2914630CrossRef

Mahmoud, S.S., Koziol, B., Jusak, J.: 5G optical sensing technologies. In: Optical and Wireless Convergence for 5G Networks (2019). Wiley, pp. 179–195. https://doi.org/10.1002/9781119491590.ch9

Marignetti, F., et al.: Fiber Bragg grating sensor for electric field measurement in the end windings of high-voltage electric machines. IEEE Trans. Ind. Electron. 63(5), 2796–2802 (2016). https://doi.org/10.1109/TIE.2016.2516500CrossRef

Melecio, J. I., Mohammed, A., Djurovic, S.: Characterisation of FBG based magnetic field sensor response sensitivity to excitation orientation for rotating electric machine applications. In: 2019 8th Mediterranean Conference on Embedded Computing, MECO 2019 - Proceedings, (June), pp. 10–14 (2019). https://doi.org/10.1109/MECO.2019.8760181

Meyer, J., et al.: Fiber optical sensors for enhanced battery safety. In: Pickrell, G., Udd, E., Du, H.H. (eds.) International Society for Optics and Photonics, p. 94800Z (2015). https://doi.org/10.1117/12.2183325

Mihailovic, P., et al.: Development of a portable fiber-optic current sensor for power systems monitoring. IEEE Trans. Instrum. Meas. 53(1), 24–30 (2004). https://doi.org/10.1109/TIM.2003.821500CrossRef

Mohammed, A., Djurović, S.: Stator winding internal thermal monitoring and analysis using in situ FBG sensing technology. IEEE Trans. Energy Convers. 33(3), 1508–1518 (2018). https://doi.org/10.1109/TEC.2018.2826229ADSCrossRef

Mohammed, A., Djurović, S.: A study of distributed embedded thermal monitoring in electric coils based on FBG sensor multiplexing. Microprocess. Microsyst. 62, 102–109 (2018). https://doi.org/10.1016/j.micpro.2018.07.006CrossRef

Mohammed, A., Djurović, S.: Feasibility study of embedded FBG thermal sensing use for monitoring electrical fault-induced thermal excitation in random wound coils. J. Eng. 17, 4147–4151 (2019). https://doi.org/10.1049/joe.2018.8108CrossRef

Mohammed, A., et al.: FBG sensing for hot spot thermal monitoring in electric machinery random wound components. In: Proceedings—2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 2266–2272 (2016). https://doi.org/10.1109/ICELMACH.2016.7732837

Mohammed, A., Melecio, J.I., Durovic, S.: Electrical machine permanent magnets health monitoring and diagnosis using an air-gap magnetic sensor. IEEE Sens. J. 20(10), 5251–5259 (2020). https://doi.org/10.1109/JSEN.2020.2969362ADSCrossRef

Morikawa, S.R.K., et al.: ‘Triaxial Bragg grating accelerometer’, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002, 95–98 (2002). https://doi.org/10.1109/OFS.2002.1000510CrossRef

Mott, R.L., Untener, J.A.: Applied strength of materials, 6th edn. CRC Press, ISBN 9781498716758 (2017)

Munteanu, G., Binder, A., Schneider, T.: Loss measurement of a 40 kW high-speed bearingless PM synchronous motor. In: IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings (6), pp. 722–729 (2011). https://doi.org/10.1109/ECCE.2011.6063841

Murray, A., Hare, B., Hirao, A.: Resolver position sensing system with integrated fault detection for automotive applications. Proc. IEEE Sens. 1(2), 864–869 (2002). https://doi.org/10.1109/icsens.2002.1037221CrossRef

NEMA: NEMA MG 1–2016 Motors and Generators (2018)

Newmaster, J.T., et al.: Remote fiber optic sensors for angular orientation. Fiber Optic Laser Sens. V 0838, 28 (2012). https://doi.org/10.1117/12.942486CrossRef

Park, C.S., et al.: A PDMS-coated optical fiber Bragg grating sensor for enhancing temperature sensitivity. J. Opt. Soc. Korea 15(4), 329–334 (2011). https://doi.org/10.3807/JOSK.2011.15.4.329CrossRef

Patel, A., Ferdowsi, M.: Current sensing for automotive electronics—a survey. IEEE Trans. Veh. Technol. 58(8), 4108–4119 (2009). https://doi.org/10.1109/TVT.2009.2022081CrossRef

Perrone, G., Vallan, A.: A low-cost optical sensor for noncontact vibration measurements. IEEE Trans. Instrum. Meas. 58(5), 1650–1656 (2009)CrossRef

Pyrhonen, J., Hrabovcova, V., Semken, R.S.: Electrical Machine Drives Control: An Introduction. Wiley, Hoboken (2016)CrossRef

Rajendran, V.P., et al.: Use of fiber optic-based distributed temperature measurement system for electrical machines. Opt. Diagn. Fluids Solids Combust. II 5191, 214 (2004). https://doi.org/10.1117/12.504249ADSCrossRef

Riley, C.M., et al.: Stator current harmonics and their causal vibrations: a preliminary investigation of sensorless vibration monitoring applications. IEEE Trans. Ind. Appl. 35(1), 94–99 (1999). https://doi.org/10.1109/28.740850CrossRef

Rivera, H.L., García-Souto, J.A., Sanz, J.: Measurements of mechanical vibrations at magnetic cores of power transformers with fiber-optic interferometric intrinsic sensor. IEEE J. Sel. Top. Quantum Electron. 6(5), 788–797 (2000). https://doi.org/10.1109/2944.892619ADSCrossRef

Rogers, A.J.: Polarization-optical time domain reflectometry: a technique for the measurement of field distributions. Appl. Opt. 20(6), 1060 (1981). https://doi.org/10.1364/ao.20.001060ADSCrossRef

Rosolem, J.B., Floridia, C., Sanz, J.P.M.: Field and laboratory demonstration of a fiber-optic/RF partial discharges monitoring system for hydrogenerators applications. IEEE Trans. Energy Convers. 25(3), 884–890 (2010). https://doi.org/10.1109/TEC.2010.2044507ADSCrossRef

Saidur, R.: A review on electrical motors energy use and energy savings. Renew. Sustain. Energy Rev. 14(3), 877–898 (2010). https://doi.org/10.1016/j.rser.2009.10.018CrossRef

Sasic, M., Jiang, H., Stone, G.C.: Requirements for fiber optic sensors for stator endwinding vibration monitoring. In: Proceedings of 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, (September), pp. 118–121 (2012). https://doi.org/10.1109/CMD.2012.6416365

Shang, K., et al.: Polyimide-coated fibre Bragg grating (FBG) sensors for thermal mapping of electric machine windings. In: 22nd International Conference on Transparent Optical Networks (ICTON 2020). IEEE, pp. 4–7 (2020).

Shyu, L.H., et al.: ‘A signal interpolation method for Fabry-Perot interferometer utilized in mechanical vibration measurement. Meas. J. Int. Meas. Confed. 92, 83–88 (2016). https://doi.org/10.1016/j.measurement.2016.05.072CrossRef

Sousa, K.D.M., et al.: Thermal and vibration dynamic analysis of an induction motor using optical fiber Bragg gratings. In: 24th International Conference on Optical Fibre Sensors, vol. 9634(September 2015), p. 963443 (2015). https://doi.org/10.1117/12.2195034

Sousa, K.M., et al.: Dynamic eccentricity induced in induction motor detected by optical fiber Bragg grating strain sensors. IEEE Sens. J. 16(12), 4786–4792 (2016). https://doi.org/10.1109/JSEN.2016.2554885ADSCrossRef

Sunar, M., Al-Bedoor, B.O.: Vibration measurement of rotating blades using a root embedded PZT sensor. Shock Vib. 15(5), 517–541 (2008). https://doi.org/10.1155/2008/494639CrossRef

Tavner, P.J.: Review of condition monitoring of rotating electrical machines. Electric power applications. IET Electr. Power Appl. 2(4), 215–247 (2008). https://doi.org/10.1049/iet-epaCrossRef

TECHNICA.Ltd: T20/Polyimide Coated FBG sensor Datasheet (2018)

The Association of Electrical Equipment and Medical Imaging Manufacturers – NEMA: Ansi/Nema Mg 1–2016’, p. 775 (2016). doi: Document ID: 100228

Toliyat, H.A., Kliman, G.B.: Handbook of Electric Motors. CRC Press, Boca Raton (2018)CrossRef

Tshiloz, K., et al.: Real-time insulation lifetime monitoring for motor windings. In: Proceedings—2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 2335–2340 (2016). https://doi.org/10.1109/ICELMACH.2016.7732847

Udd, E.: Fiber Optic Sensors Based on the sagnac interferometer and passive ring resonator. In: Fiber Optic Sensors: An Introduction for Engineers and Scientists, pp. 199–230 (2011a)

Udd, E.: The emergence of fiber optic sensor technology. In: Fiber Optic Sensors: An Introduction for Engineers and Scientists. Wiley, Hoboken, NJ, USA, p. 512 (2011b). https://doi.org/10.1002/9781118014103.ch1

Udd, E., Spillman, W.B.: Fiber optic sensors. An Introduction for Engineers and Scientists, Fiber optics sensors (2011)

Ukil, A., Braendle, H., Krippner, P.: Distributed temperature sensing: review of technology and applications. IEEE Sens. J. 12(5), 885–892 (2012). https://doi.org/10.1109/JSEN.2011.2162060ADSCrossRef

Uttam, D., Culshaw, B.: Precision time domain reflectometry in optical fiber systems using a frequency modulated continuous wave ranging technique. J. Lightw. Technol. 3(5), 971–977 (1985). https://doi.org/10.1109/JLT.1985.1074315ADSCrossRef

Vali, V., Shorthill, R.W.: Fiber ring interferometer. Appl. Opt. 15(5), 1099 (1976). https://doi.org/10.1364/ao.15.001099ADSCrossRef

Vehicles, M., Pacific, A., America, L.: Electric motors : market research report electric motors: market research report (2019)

Wang, P., et al.: Quasi-distributed temperature measurement for stator bars in large generator via use of Fiber Bragg Gratings. In: Proceedings of the 6th International Forum on Strategic Technology, IFOST 2011, vol. 2, pp. 810–813 (2011). https://doi.org/10.1109/IFOST.2011.6021144

Wang, C., Lu, Q., Cheng, L.: Novel type of temperature self-compensating acceleration transducer based on ofbg. IEEE Sens. J. 13(8), 3012–3013 (2013). https://doi.org/10.1109/JSEN.2013.2253604ADSCrossRef

Wang, Y., et al.: A two fiber Bragg gratings sensing system to monitor the torque of rotating shaft. Sensors (Switzerland) 16(1), 1–8 (2016). https://doi.org/10.3390/s16010138CrossRef

Wang, Y., et al.: Partial discharge ultrasound detection using the Sagnac interferometer system. Sensors (Switzerland) 18(5), 1–18 (2018). https://doi.org/10.3390/s18051425CrossRef

Wei, L., et al.: Fiber bragg grating based rotating speed measurement system. In: 2011 International Conference on Electric Information and Control Engineering, ICEICE 2011—Proceedings. IEEE, pp. 1387–1390 (2011). https://doi.org/10.1109/ICEICE.2011.5777520

Xu, D., et al.: A review of sensorless control methods for AC motor drives. Trans. Electr. Mach. Syst. 2(1), 104–115 (2019). https://doi.org/10.23919/TEMS.2018.8326456CrossRef

Yang, H.Z., et al.: A review of recent developed and applications of plastic fiber optic displacement sensors. Meas. J. Int. Meas. Confederation 48(1), 333–345 (2014). https://doi.org/10.1016/j.measurement.2013.11.007ADSCrossRef

Yang, Y., Bilgin, B., et al.: Thermal management of electric machines. IET Electr. Syst. Transp. 7(2), 104–116 (2017a). https://doi.org/10.1049/iet-est.2015.0050CrossRef

Yang, Y., Castano, S.M., et al.: Design and comparison of interior permanent magnet motor topologies for traction applications. IEEE Trans. Transp. Electrif. 3(1), 86–97 (2017b). https://doi.org/10.1109/TTE.2016.2614972CrossRef

Zhang, X., Wu, X., Diao, W.: An approach for the dynamic compensation of the batch balance in the process control. In: Proceedings - 2004 International Conference on Intelligent Mechatronics and Automation, (August), pp. 789–792 (2004). https://doi.org/10.1109/icima.2004.1384305

Zheng, P., Pan, S., Li Y.: The research on the network optical fiber sensor of the surface temperature measurement for a large rotor based on IEEE1451.2. In: 2005 International Conference on Electrical Machines and Systems. IEEE, vol. 3, pp. 2434–2436 (2005). https://doi.org/10.1109/ICEMS.2005.203010

Titel: Fibre optic sensors for the monitoring of rotating electric machines: a review
verfasst von: Kun Shang
Yaping Zhang
Michael Galea
Vladimir Brusic
Serhiy Korposh
Publikationsdatum: 01.02.2021
Verlag: Springer US
Erschienen in: Optical and Quantum Electronics / Ausgabe 2/2021
Print ISSN: 0306-8919
Elektronische ISSN: 1572-817X
DOI: https://doi.org/10.1007/s11082-020-02712-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 2/2021

An optimized design of all-optical XOR, OR, and NOT gates using plasmonic waveguide

In situ synthesis of gold nanoparticles within poly (vinyl alcohol) matrix under electron accelerator radiation: photoluminescence, thermal and electrical properties

Very high efficient of 1 × 2, 1 × 4 and 1 × 8 Y beam splitters based on photonic crystal ring slot cavity

Wavelength division multiplexing transmission using multimode erbium doped fiber amplifier with elevated refractive index profile

Non-invasive cuff-less blood pressure estimation using a hybrid deep learning model

Modified range equation for exact modeling and design optimization of active laser remote sensing systems