nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

3. Flow Boiling Enhancement Techniques

verfasst von : Sujoy Kumar Saha, Hrishiraj Ranjan, Madhu Sruthi Emani, Anand Kumar Bharti

Erschienen in: Two-Phase Heat Transfer Enhancement

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter has started with the introduction to flow boiling enhancement techniques. Thereafter, the chapter runs through the fundamentals, flow patterns, thermal convection and pressure drop and flow orientation. Tube bundles, CHF and microfin tubes have also been discussed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Pool Boiling Enhancement Techniques

Nächstes Kapitel Condensation

Abdul K, Wang CC (2016) Investigation of thermal-hydrodynamic heat transfer performance of R-1234ZE and R-134a refrigerants in a micro-fin and smooth tube. J Enhanc Heat Transf 23(3):221CrossRef

Agrawal KN, Varma HK, Lal S (1982) Pressure drop during forced convection boiling of R-12 under swirl flow. J Heat Transf 104(4):758–762CrossRef

Agrawal KN, Varma HK, Lal S (1986) Heat transfer during forced convection boiling of R-12 under swirl flow. J Heat Transf 108(3):567–573CrossRef

Akhanda MA, James DD (1991) An experimental study of the relative effects of transverse and longitudinal ribbing of the heat transfer surface in forced convective boiling. J Heat Transf 113(1):209–215CrossRef

Antonelli R, O’Neill PS (1981) Design and application considerations for heat exchangers with enhanced boiling surfaces. Paper presented at international conference on advances in heat exchangers, Dubrovnik, Yugoslavia

Arai N, Fukushima T, Arai A, Nakajima T, Fujie K, Nakayama Y (1977) Heat transfer tubes enhancing boiling and condensation in heat exchanger of a refrigerating machine. ASHRAE Trans 83:58–70

Azer NZ, Sivakumar V (1984) Enhancement of saturated boiling heat transfer by internally finned tubes. ASHRAE Trans 90(1A):58–73

Baker O (1954), Simultaneous flow of oil and gas: A report on Magnolia's research on two-phase pipeline design, Oil Gas J 26(5):185–195

Bao ZY, Fletcher DF, Haynes BS (2000) Flow boiling heat transfer of Freon R11 and HCFC123 in narrow passages. Int J Heat Mass Transf 43(18):3347–3358CrossRef

Bennett DL, Chen JC (1980) Forced convective boiling in vertical tubes for saturated pure components and binary mixtures. AICHE J 26(3):454–461CrossRef

Bergles AE, Chyu MC (1982) Characteristics of nucleate pool boiling from porous metallic coatings. J Heat Transf 104:279–285CrossRef

Bergles AE, Fuller WD, Hynek SJ (1971) Dispersed flow film boiling of nitrogen with swirl flow. Int J Heat Mass Transf 14(9):1343–1354CrossRef

Bhatia RS, Webb RL (2001) Numerical study of turbulent flow and heat transfer in micro-fin tubes—part 2, parametric study. J Enhanc Heat Transf 8(5)CrossRef

Blatt TA, Adt RR (1963) The effects of twisted tape swirl generators on the heat transfer rate and pressure drop of boiling Freon 11 and water. In: ASME Paper No. ASME-63-WA-42

Boling C, Donovan WJ, Decker AS (1953) Heat transfer of evaporating freon with inner-fin tubing. Refrig Eng 61:1338–1340

Brognaux LJ, Webb RL, Chamra LM, Chung BY (1997) Single-phase heat transfer in micro-fin tubes. Int J Heat Mass Transf 40(18):4345–4357CrossRef

Bukin VG, Danilova GN, Dyundin VA (1982) Heat transfer from Freons in a film flowing over bundles of horizontal tubes that carry a porous coating. Heat Transf Soviet Res 14(2):98–103

Campolunghi F, Cumo M, Ferrari G, Palazzi G (1976) Full scale tests and thermal design of once-through steam generators. In: AIChE paper presented at 16th national heat transfer conference, St. Louis, MO

Carey VP (1992) Liquid-vapor phase-change phenomena: an introduction to the thermodynamics of vaporization and condensation processes in heat transfer equipment. Hemisphere, Washington, DC

Carey VP, Shah RK (1988) Design of compact and enhanced heat exchangers for liquid-vapor phase-change applications. In: Two-phase flow heat exchangers. Springer, Dordrecht, pp 909–968CrossRef

Carnavos TC (1980) Heat transfer performance of internally finned tubes in turbulent flow. Heat Transf Eng 1(4):32–37CrossRef

Cavallini A, Del Col D, Doretti L, Longo GA, Rossetto L (1998) Refrigerant vaporisation inside enhanced tubes: a heat transfer model. In Eurotherm seminar, pp 222–231

Cavallini A, Del Col D, Doretti L, Longo GA, Rossetto L (2000) Heat transfer and pressure drop during condensation of refrigerants inside horizontal enhanced tubes. Int J Refrig 23(1):4–25CrossRef

Celata GP, Cumo M, Mariani A (1994) Enhancement of CHF water subcooled flow boiling in tubes using helically coiled wires. Int J Heat Mass Transf 37(1):53–67CrossRef

Chamra LM, Webb RL (1995) Condensation and evaporation in micro-fin tubes at equal saturation temperatures. J Enhanc Heat Transf 2(3):219CrossRef

Chamra LM, Webb RL, Randlett MR (1996) Advanced micro-fin tubes for evaporation. Int J Heat Mass Transf 39(9):1827–1838CrossRef

Chen JC (1966) Correlation for boiling heat transfer to saturated fluids in convective flow. Indust Eng Chem Process Des Dev 5(3):322–329CrossRef

Chen T, Luo YS, Zheng J, Bi Q (2000) Boiling heat transfer and frictional pressure drop in internally rebbed tubes at high pressures. In: Symposium on energy engineering in the 21st century, Hong Kong, pp 393–398

Chen T-K, Chen X-Z, Chen X-J (1992) Boiling heat transfer and frictional pressure drop in internally ribbed tubes. In: Chen X-J, Vezirolu TN, Tien CL (eds) Multiphase flow and heat transfer: second international symposium, vol 1. Hemisphere Pub. Corp., New York, pp 621–629

Chisholm D (1967) A theoretical basis for the Lockhart-Martinelli correlation for two-phase flow. Int J Heat Mass Transf 10(12):1767–1778CrossRef

Chun KR, Seban RA (1971) Heat transfer to evaporating liquid films. J Heat Transf 93:391–396CrossRef

Chyu MC, Bergles AE (1985) Enhancement of horizontal tube spray film evaporators by structured surfaces. Adv Enhanced Heat Transf 43:39–47

Chyu MC, Bergles AE (1989) Horizontal-tube falling-film evaporation with structured surfaces. J Heat Transf 111(2):518–524CrossRef

Conklin JC, Vineyard EA (1992) Flow boiling enhancement of R22 and a nonazeotropic mixture of R143a and R124 using perforated foils. Oak Ridge National Lab, Oak Ridge, TN

Conti RJ (1978) Experimental investigation of horizontal tube ammonia film evaporators with small temperature differentials. In: Proceedings of the 5th Ocean Thermal Energy Conversion (OTEC)

Cooper MG (1984) Saturation nucleate pool boiling—a simple correlation. Chem E Symp Ser 86:786

Cornwell K, Scoones DJ (1988) Analysis of low-quality boiling on plain and low-finned tube bundles. Presented at second UK heat transfer conference, vol 1, pp 21–32

Crain Jr B (1973) Forced convection heat transfer to a two-phase mixture of water and steam in a helical coil. Doctoral dissertation, Oklahoma State University

Cui S, Tan Y, Lu Y (1992) Heat transfer and flow resistance of R-502 flow boiling inside horizontal ISF tubes. In: Multiphase flow and heat transfer: second international symposium, vol 1. Hemisphere, New York, pp 662–670

Cui W, Mungai SK, Wilson C, Ma H, Li B (2016) Subcooled flow boiling on a two-step electrodeposited copper porous surface. J Enhanc Heat Transf 23(2):91CrossRef

Cumo M, Farello GE, Ferrari G, Palazzi G (1974) The influence of twisted tapes in subcritical, once-through vapor generators in counter flow. J Heat Transf 96(3):365–370CrossRef

Czikk AM, Gottzmann CF, Ragi EG, Withers JG, Habdas EP (1970) Performance of advanced heat transfer tubes in refrigerant-flooded liquid coolers. ASHRAE Trans 76:96–107

Czikk AM, O’Neill PS, Gottzmann CF (1981) Nucleate pool boiling from porous metal films effect of primary variables. Adv Heat Tran 18:109–122

Del Col D, Webb RL, Narayanamurthy R (2002) Heat transfer mechanisms for condensation and vaporization inside a microfin tube. J Enhanc Heat Transf 9(1)

Dong F, Cao T, Hou L, Ni J (2019) Optimization study of artificial cavities on subcooled flow boiling performance of water in a horizontal simulated engine cooling passage. J Enhanc Heat Transf 26(1):37CrossRef

Ebisu T (1999) Evaporation and condensation heat transfer enhancement for alternative refrigerants used in air-conditioning machines. In: Heat transfer enhancement heat exchangers. Springer, Dordrecht, pp 579–600CrossRef

Eckels SJ, Pate MB (1991) In-tube evaporation and condensation of refrigerant-lubricant mixtures of HFC-134a and CFC-12. ASHRAE Trans 97:62–70

Fagerholm NE, Kivioja K, Ghazanfari AR, Jaervinen E (1985) Using structured surfaces to enhance heat transfer in falling film flow. NASA STI/Recon Technical Report No. 87

Fujie K, Itoh N, Innami T, Kimura H, Nakayama N, Yanugidi T (1977) Heat transfer pipe. US Patent 4,044,797, assigned to Hitachi Ltd

Fujita Y (1998) Boiling and evaporation of falling film on horizontal tubes and its enhancement on grooved tubes. In: Kakac S, Bergles AE, Mayinger F, Yuncu H (eds) Heat Transfer Enhancement of Heat Exchangers. Kluwer Academic, Dordrecht, 3259–3346

Fujita Y (1999) Boiling and evaporation of falling film on horizontal tubes and its enhancement on grooved tubes. In: Heat transfer enhanced heat exchangers. Springer, Dordrecht, pp 325–346CrossRef

Fujita Y, Ohta H, Hidaka S, Nishikawa K (1986) Nucleate boiling heat transfer on horizontal tubes in bundles. In: Proceedings of 8th Int Heat Transfer Conf, pp 2131–2136

Fujita Y, Yang Y, Fujita N (2002) Flow boiling heat transfer and pressure drop in uniformly heated small tubes. In: Heat transfer 2002, 12th international heat transfer conference, vol 3, pp 743–748

Gambill WR (1963) Generalized prediction of burnout heat flux for flowing, subcooled, wetting liquids. Chem Eng Prog Symp Ser 59(41):71–87

Gambill WR (1965) Subcooled swirl-flow boiling and burnout with electrically heated twisted Tapes and Zero Wall Flux. J Heat Transf 87(3):342–348CrossRef

Gambill WR, Bundy RD, Wansbrough RW (1960) Heat transfer, burnout, and pressure drop for water in swirl flow through tubes with internal twisted tapes. Oak Ridge National Lab, Oak Ridge

Gan YP, Chen Q, Yuan XY, Tian SR (1993) An experimental study of nucleate boiling heat transfer from flame spraying surface of tube bundle in R113/R11-oil mixtures. In: Experimental heat transfer, fluid mechanics, and thermodynamics, p 1226CrossRef

Gorenflo D (2001) State of the art in pool boiling heat transfer of new refrigerants. Int J Refrig 24(1):6–14MathSciNetCrossRef

Goto M, Inoue N, Ishiwatari N (2001) Condensation and evaporation heat transfer of R410A inside internally grooved horizontal tubes. Int J Refrig 24(7):628–638CrossRef

Grimley TA, Mudawwar IA, Incropera FP (1987) Enhancement of boiling heat transfer in falling films. In: Proc. 1987 ASME-JSME Therm. Eng. Joint Conf., vol 3, pp 411–418

Gu CB, Chow LC, Beam JE (1989) Flow boiling in a curved channel. Heat Transf High Energy High Heat Flux Appl 119:25–32

Gupte NS, Webb RL (1992) Convective vaporization of refrigerants in tube banks. ASHRAE Trans 98(Pt. 2):411–424

Gupte NS, Webb RL (1994) Convective vaporization of pure refrigerants in enhanced and integral-fin tube banks. J Enhanc Heat Transf 1(4):351CrossRef

Gupte NS, Webb RL (1995a) Convective vaporization data for pure refrigerants in Tube Banks. Part II: enhanced tubes. HVAC&R Res 1(1):48–60CrossRef

Gupte NS, Webb RL (1995b) Convective vaporization data for pure refrigerants in tube banks, part I: integral-finned tubes. Int J HVAC&R Res 1(1):35–47CrossRef

Hewitt GF, Roberts DN (1969) Studies of two-phase flow patterns by simultaneous X-ray and flash photography. Atomic Energy Research Establishment Harwell, UK

Honda H, Takamatsu H, Wei JJ (2003) Enhanced boiling heat transfer from silicon chips with micro-pin fins immersed in FC-72. J Enhanc Heat Transf 10(2):211CrossRef

Hori M, Shinohara Y (2001) Internal heat transfer characteristics of small diameter thermofin tubes. Hitachi Cable Rev 10:85–90

Houfuku M, Suzuki Y, Inui K (2001) High performance, light weight thermos-fin tubes for air-conditioners using alternative refrigerants. Hitachi Cable Rev 20:97–100

Hsieh YY, Lin TF (2002) Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger. Int J Heat Mass Transf 45(5):1033–1044CrossRef

Hsieh SS, Huang GZ, Tsai HH (2003) Nucleate pool boiling characteristics from coated tube bundles in saturated R-134a. Int J Heat Mass Transf 46(7):1223–1239CrossRef

Hu H, Ding GL, Huang XL, Deng B, Gao YF (2011) Experimental investigation and correlation of two-phase heat transfer of R410a/oil mixture flow boiling in a 5-mm microfin tube. J Enhanc Heat Transf 18(3):209–220CrossRef

Huang X, Li RY, Yu HL (2004) Enhancement of boiling heat transfer for R11 and R123 by applying uniform electric field. J Enhanc Heat Transf 11(4):299CrossRef

Hwang YW, Kim MS, Kim Y (2005) Evaporation heat transfer and pressure drop in micro-fin tubes before and after tube expansion. J Enhanc Heat Transf 12(1):59CrossRef

Ikeuchi M, Yumikura T, Fujii M, Yamanaka G (1984) Heat-transfer characteristics of an internal microporous tube with refrigerant 22 under evaporating conditions. ASHRAE Trans 90(1A):196–211

Ishihara K, Palen JW, Taborek J (1980) Critical review of correlations for predicting two-phase flow pressure drop across tube banks. Heat Transf Eng 1(3):23–32CrossRef

Ishikawa S, Nagahara K, Sukumoda S (2002) Heat transfer and pressure drop during evaporation and condensation of HCFC22 in horizontal copper tubes with many inner fins. J Enhanc Heat Transf 9(1):17CrossRef

Ito M, Kimura H (1979) Boiling heat transfer and pressure drop in internal spiral-grooved tubes. Bull JSME 22(171):1251–1257CrossRef

Jensen MK (1984) A correlation for predicting the critical heat flux condition with twisted-tape swirl generators. Int J Heat Mass Transf 27(11):2171–2173CrossRef

Jensen MK (1985) An evaluation of the effect of twisted-tape swirl generators in two-phase flow heat exchangers. Heat Transf Eng 6(4):19–30CrossRef

Jensen MK, Bensler HP (1986) Saturated forced-convective boiling heat transfer with twisted-tape inserts. J Heat Transf 108(1):93–99CrossRef

Jensen MK, Bergles AE (1981) Critical heat flux in helically coiled tubes. J Heat Transf 103(4):660–666CrossRef

Jensen MK, Hsu JT 1987 A parametric study of boiling heat transfer in a tube bundle. In: Proceedings of the 1987 ASME-JSME thermal engineering joint conference, vol 3, pp 133–140

Jensen MK, Trewin RR, Bergles AE (1992) Crossflow boiling in enhanced tube bundles. ASME, New York, NY (USA) 220:11–17

Jones RJ, Pate DT, Thiagarajan N, Bhavnani SH (2009) Heat transfer and pressure drop characteristics in dielectric flow in surface-augmented microchannels. J Enhanc Heat Transf 6(3)CrossRef

Kabata Y, Nakajima R, Shioda K (1996) Enhancement of critical heat flux for subcooled flow boiling of water in tubes with a twisted tape and with a helically coiled wire. In: ICONE-4: Proceedings. Vol 1—Part B: Basic technological advances

Kandlikar SG (1991) Correlating flow boiling heat transfer data in binary systems. Phase Change Heat Transfer, p 159

Kasza KE, Didascalou T, Wambsganss MW (1997) Microscale flow visualization of nucleate boiling in small channels: mechanisms influencing heat transfer. Argonne National Lab., Lemont, IL

Kattan N, Thome JR, Favrat D (1998) Flow boiling in horizontal tubes: part 3—development of a new heat transfer model based on flow pattern. J Heat Transf 120(1):156–165CrossRef

Kazachkov IV, Palm B (2005) Analysis of annular two-phase flow dynamics under heat transfer conditions. J Enhanc Heat Transf 12(1):37CrossRef

Kedzierski MA, Kedzierski MA (1997) Convective Boiling and Condensation Heat Transfer with a Twisted-tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a. US Department of Commerce, National Institute of Standards and Technology

Kew PA, Cornwell K (1997) Correlations for the prediction of boiling heat transfer in small-diameter channels. Appl Therm Eng 17(8–10):705–715CrossRef

Kim NH (2015) Effect of aspect ratio on evaporation heat transfer and pressure drop of R-410A in flattened microfin tubes. J Enhanc Heat Transf 22(3):177CrossRef

Kim MH, Shin JS, Bullard CW (2001) Heat transfer and pressure drop characteristics during R22 evaporation in an oval microfin tube. J Heat Transf 123(2):301–308CrossRef

Kim NH, Cho JP, Youn B (2002) Forced convective boiling of pure refrigerants in a bundle of enhanced tubes having pores and connecting gaps. Int J Heat Mass Transf 45(12):2449–2463CrossRef

Kitto JB, Weiner M (1982) Effects of nonuniform circumferential heating and inclination on critical heat flux in smooth and ribbed bore tubes. In: 7th international heat transfer conference, Munich

Kosky PG (1971) Thin liquid films under simultaneous shear and gravity flows. Int J Heat Mass Transf 14:1220–1223CrossRef

Koyama S, Yu J, Momoki S, Fujii T, Honda H (1995) Forced convective flow boiling heat transfer of pure refrigerants inside a horizontal microfin tube. In: Proceedings of the convective flow boiling, pp 137–42

Kubanek GR, Miletti DL (1979) Evaporative heat transfer and pressure drop performance of internally-finned tubes with refrigerant 22. J Heat Transf 101(3):447–452CrossRef

Kun LC, Czikk AM (1969) Surface for boiling liquids. US Patent 3,454,081 (Reissued 1979, Ref. 30,077), assigned to Union Carbide Corp

Lan J, Disimile PJ, Weisman J (1997) Two phase flow patterns and boiling heat transfer in tubes containing helical wire inserts—part II—critical heat flux studies. 4(4)

Lavin JG, Young EH (1965) Heat transfer to evaporating refrigerants in two-phase flow. AICHE J 11(6):1124–1132CrossRef

Lazarek GM, Black SH (1982) Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113. Int J Heat Mass Transf 25(7):945–960CrossRef

Lee SC, Chien LH (2011) Experimental study of pool boiling on pin-finned and straight-finned surfaces on an inclined plate in FC-72. J Enhanc Heat Transf 18(4):311CrossRef

Lewis LG, Sather NF (1978) OTEC performance tests of the Union Carbide flooded-bundle evaporator. Argonne National Lab., Lemont, ILCrossRef

Lin S, Kew PA, Cornwell K (2001) Two-phase heat transfer to a refrigerant in a 1 mm diameter tube. Int J Refrig 24:51–56CrossRef

Liu ZH, Qiu YH (2002) Enhanced boiling heat transfer in restricted spaces of a compact tube bundle with enhanced tubes. Appl Therm Eng 22(17):1931–1941CrossRef

Liu ZH, Tong TF (2002) Boiling heat transfer of water and R-11 on horizontally smooth and enhanced tubes enclosed by a concentric outer tube with two horizontal slots. Experimental heat transfer 15(3):161–175CrossRef

Liu Z, Winterton RH (1991) A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation. Int J Heat Mass Transf 34(11):2759–2766CrossRef

Liu ZH, Yi J (2002) Falling film evaporation heat transfer of water/salt mixtures from roll-worked enhanced tubes and tube bundle. Appl Therm Eng 22(1):83–95CrossRef

Lorenz JJ, Yung D (1979) A note on combined boiling and evaporation of liquid films on horizontal tubes. J Heat Transf 101(1):178–180CrossRef

Mailen GS (1980) Experimental studies of OTEC heat transfer evaporation of ammonia on vertical smooth and fluted tubes (No. CONF-800633-2). Oak Ridge National Lab., Oak Ridge, TN

Mandrusiak GD, Carey VP (1989) Convective boiling in vertical channels with different offset strip fin geometries. J Heat Transf 111(1):156–165CrossRef

Manglik RM, Bergles AE (1993) Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: part I—laminar flows. J Heat Transf 115(4):881–889CrossRef

Marvillet C (1989) Influence of oil on nucleate pool boiling of refrigerants R-12 and R-22 from Porous Layer Tube. In: Proceedings of eighth eurotherm conference, advances in pool boiling heat transfer, Paderborn, Germany, pp 164–168

Megerlin FE, Murphy RW, Bergles AE (1974) Augmentation of heat transfer in tubes by use of mesh and brush inserts. J Heat Transf 96(2):145–151CrossRef

Mehendale S (2016) The impact of fin deformation on flow boiling heat transfer and pressure drop inmicrofin tubes. J Enhanc Heat Transf 23(3):197CrossRef

Memory SB, Chilman SV, Marto PJ (1994) Nucleate pool boiling of a TURBO-B bundle in R-113. J Heat Transf 116(3):670–678CrossRef

Memory SB, Akcasayar N, Eraydin H, Marto PJ (1995) Nucleate pool boiling of R-114 and R-114-oil mixtures from smooth and enhanced surfaces—II. Tube bundles. Int J Heat Mass Transf 38(8):1363–1376CrossRef

Moeykens, SA, Pate MB (1996) Effect of lubricant on spray evaporation heat transfer performance of R-134a and R-22 in tube bundles (No. CONF-960254-). American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., Atlanta, GA

Moeykens SA, Huebsch WW, Pate MB (1995a) Heat transfer of R-134a in single-tube spray evaporation including lubricant effects and enhanced surface results. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., Atlanta, GA

Moeykens SA, Newton BJ, Pate MB (1995b) Effects of surface enhancement, film-feed supply rate, and bundle geometry on spray evaporation heat transfer performance. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., Atlanta, GA

Molki M, Ohadi MM, Rupani AP, Franca FH (2003) Enhanced flow boiling of R-134a in a minichannel plate evaporator. J Enhanc Heat Transf 10(1):1CrossRef

Muller J (1986) Boiling heat transfer on finned tube bundles—the effect of tube position and intertube spacing. In: Proceedings of the 8th international heat transfer conference, vol 4, pp 2111–2116

Muzzio A, Niro A, Arosio S (1998) Heat transfer and pressure drop during evaporation and condensation of R22 inside 9.52-mm OD microfin tubes of different geometries. J Enhanc Heat Transf 5(1):39CrossRef

Nakajima K, Shiozawa A (1975) An experimental study on the performance of a flooded type evaporator. Heat Transf Jpn Res 4(3):49–66

Nakayama W, Daikou T, Nakajima T (1982) Enhancement of Boiling and Evaporation on Structured Surfaces with Gravity-Driven Flow of R-11. In: Proceedings of the 7th international heat transfer conference, heat transfer 1982, Munich, Germany, vol 4, pp 409–414

Nasr MR, Behfar R (2012) Enhanced evaporative fluid coolers. J Enhanc Heat Transf 19(2)

Newell TA, Shah RK (2001) An assessment of refrigerant heat transfer, pressure drop, and void fraction effects in microfin tubes. HVAC&R Res 7(2):125–153CrossRef

Nunez MP, Polley GT, Sunden B, Heggs PJ (1999) Methodology for the design of multi-stream plate-fin heat exchangers. In: Sunden B, Heggs PJ (eds) Recent advances in analysis of heat transfer for fin type surfaces. Computational Mechanics, Billerica, MA, pp 277–293

O’Neill PS (1981) Private communication, February 16. Linde Div., Union Carbide Corp., Tonawanda, NY

Ouazia B (2001) Evaporation heat transfer and pressure drop of HFC-134a inside a plate heat exchanger. In: Proceedings of American Society of Mechanical Engineers

Owens WL (1978) Correlation of thin film evaporation heat transfer coefficient for horizontal tubes. In: Proceedings of the 5th OTEC conference, vol 3, pp 71–89

Palm B (1990) Heat Transfer Augmentation in Flow Boiling by Aid of Perforated Metal Foils. In: ASME paper 90-WNHT-10, ASME, New York

Panchal CB, France DM, Bell KJ (1992) Experimental investigation of single-phase, condensation, and flow boiling heat transfer for a spirally fluted tube. Heat Transf Eng 13(1):42–52CrossRef

Parken WH, Fletcher LS, Sernas V, Han JC (1990) Heat transfer through falling film evaporation and boiling on horizontal tubes. J Heat Transf 112(3):744–750CrossRef

Parker JL, El-Genk MS (2009) Saturation boiling of HFE-7100 dielectric liquid on copper surfaces with corner pins at different inclinations. J Enhanc Heat Transf 16(2)CrossRef

Pearson JF, Young EH (1970) Simulated performance of refrigerant-22 boiling inside of tubes in a four pass shell and tube heat exchanger. AIChE Symp Ser 66(102):164–173

Pettersen J (2003) Two-phase flow pattern, heat transfer, and pressure drop in microchannel vaporization of CO2/discussion. ASHRAE Trans 109:523

Pierre B (1964) Flow resistance with boiling refrigerants: part 1 & part 2. ASHRAE J 6:58–77

Polley GT, Ralston T, Grant ID (1980) Forced crossflow boiling in an ideal in-line tube bundle. In: ASME paper (80-HT), p 46

Quazia B (2001) Evaporation heat transfer and pressure drop of HFC-134A inside a plate heat exchanger. In: Proceedings of the 2001 ASME international mechanical engineering congress and exposition, PID, vol 6, pp 115–123

Ravigururajan TS, Bergles AE (1985) General correlations for pressure drop and heat transfer for single-phase turbulent flow in internally ribbed tubes. In: Augmentation of heat transfer in energy systems, ASME HTD-52, pp 9–20

Rifert VG, Butuzov AI, Belik DN (1975) Heat transfer in vapor generation in a falling film inside a vertical tube with a finely-finned surface. Heat Trans Soviet Res 7(2):22–25

Rifert VG, Putilin J, Podberezny VL (1992) Evaporation heat transfer in liquid films flowing down the horizontal smooth and longitudinally-profiled tubes. In: Institution of Chemical Engineers, Davis Building, Rugby (ENGL)(3-1289)

Robertson JM (1980) Review of boiling, condensing and other aspects of two-phase flow in plate fin heat exchangers. In: Shah RK, McDonald CF, Howard CP (eds) Compact heat exchangers-history, technological advances and mechanical design problems, HTD, vol 10. ASME, New York, pp 17–27

Roser R, Thonon B, Mercier P (1999) Experimental investigations on boiling of n-pentane across a horizontal tube bundle: two-phase flow and heat transfer characteristics. Int J Refrig 22(7):536–547CrossRef

Schlager LM, Pate MB, Bergles AE (1988a) Performance of microfin tubes with refrigerant-22 and oil mixtures. ASHRAE J:17–28

Schlager LM, Pate MB, Bergles AE (1988b) Evaporation and condensation of refrigerant-oil mixtures in a smooth tube and a micro-fin tube. ASHRAE Trans 94(3112):149–166

Schlager LM, Pate MB, Bergles AE (1990) Evaporation and condensation heat transfer and pressure drop in horizontal, 12.7-mm microfin tubes with refrigerant 22. J Heat Transf 112(4):1041–1047CrossRef

Schliinder EU, Chawla J (1967) Local heat transfer and pressure drop for refrigerants evaporating in horizontal, internally finned tubes. In: Proc Int Cong Refrig paper 2.47

Seo K, Kim Y (2000) Evaporation heat transfer and pressure drop of R-22 in 7 and 9.52 mm smooth/micro-fin tubes. Int J Heat Mass Transf 43(16):2869–2882CrossRef

Shatto DP, Peterson GP (2017) Flow boiling heat transfer with twisted tape inserts. J Enhanc Heat Transf 24(1–6):21CrossRef

Shinohara Y, Tobe M (1985) Development of an improved thermofin tube. Hitachi Cable Rev 4:47–50

Shinohara Y, Oizumi K, Itoh Y, Hori M (1987) Inventors Hitachi Cable Ltd, assignee. Heat-transfer tubes with grooved inner surface. United States Patent US 4,658,892

Steiner D, Taborek J (1992) Flow boiling heat transfer of single components in vertical tubes. Heat Transf Eng 13(2):43–69CrossRef

Swenson HS, Carver JR, Szoeke G (1962) The effects of nucleate boiling versus film boiling on heat transfer in power boiler tubes. J Eng Power 84(4):365–371CrossRef

Taitel Y, Dukler AE (1976) A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow. AICHE J 22(1):47–55CrossRef

Takahashi K, Daikoku T, Yasuda H, Yamashita T, Zushi S (1990) The evaluation of a falling film evaporator in an R22 chiller unit. ASHRAE Trans 96(2):158–163

Takamatsu H, Momoki S, Fujii T (1993) A correlation for forced convective boiling heat transfer of pure refrigerants in a horizontal smooth tube. Int J Heat Mass Transf 36(13):3351–3360CrossRef

Tatara RA, Payvar P (1999) Effects of oil on boiling R-123 and R-134a flowing normal to an integral-finned tube bundle. ASHRAE Trans 105:478

Tatara RA, Payvar P (2000a) Effects of oil on boiling of replacement refrigerants flowing normal to a tube bundle-part I. In: ASHRAE Winter Meeting 2000 ASHRAE

Tatara RA, Payvar P (2000b) Effects of oil on boiling of replacement refrigerants flowing normal to a tube bundle—Part II. In: ASHRAE Winter Meeting 2000 ASHRAE

Tatsumi A, Oizumi K, Hayashi M, Ito M (1982) Application of inner groove tubes to air conditioners. Hitachi Rev 32(1):55–60

Thome JR (1990) Enhanced boiling heat transfer. Hemisphere Pub. Corp (Taylor & Francis)

Thome JR (1996) Boiling of new refrigerants: a state-of-the-art review. Int J Refrig 19(7):435–457CrossRef

Thome JR, Favrat D, Kattan N (1997) Evaporation in microfin tubes: a generalized prediction model

Thome JR, Kattan N, Favrat D (1999) Evaporation in microfin tubes: a generalized prediction model. In: Convective flow and pool boiling. Taylor and Francis, pp 239–244

Thonon B, Vidil R, Marvillet C (1995) Recent research and developments in plate heat exchangers. J Enhanc Heat Transf 2(1–2):149CrossRef

Topin F, Rahli O, Tadrist L, Pantaloni J (1996) Experimental study of convective boiling in a porous medium: temperature field analysis. J Heat Transf 118(1):230CrossRef

Torikoshi K, Ebisu T (1999) Japanese advanced technologies of heat exchanger in air-conditioning and refrigeration applications. In: Shah RK, Bell KJ, Honda H, Thonon B (eds) Compact heat exchangers and enhancement technology for the process industries. Begell Honse, New York, pp 17–24

Tran TN, Wambsganss MW, France DM (1996) Small circular-and rectangular-channel boiling with two refrigerants. Int J Multiphase Flow 22(3):485–498MATHCrossRef

Tsuchida T, Yasuda K, Hori M, Otani T (1993) Internal heat transfer characteristics and workability of narrow thermofin tubes. Hitachi Cable Rev 12:97–100

Varma HK, Agrawal KN, Bansal ML (1991) Heat transfer augmentation by coiled wire turbulence promoters in a horizontal refrigerant-22 evaporator. Presented at winter meeting, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, New York, NY. ASHRAE Trans 97:359–364

Wadekar VV (1998) A comparative study of in-tube boiling on plain and high flux coated surfaces. J Enhanc Heat Transf 5(4):257CrossRef

Wambsganss MW, France DM, Jendrzejczyk JA, Tran TN (1993) Boiling heat transfer in a horizontal small-diameter tube. J Heat Transf 115(4):963–972CrossRef

Webb RL, Apparao TV (1990) Performance of flooded refrigerant evaporators with enhanced tubes. Heat Transf Eng 11(2):29–44CrossRef

Webb RL, Chien LH (1994) Correlation of convective vaporization on banks of plain tubes using refrigerants. Heat Transf Eng 15(3):57–69CrossRef

Webb RL, Choi K-D, Apparao T (1990) A theoretical model to predict the heat duty and pressure drop in flooded refrigerant evaporators. ASHRAE Trans 95(Pt. 1):326–338

Webb RL, Gupte NS (1992) A critical review of correlations for convective vaporization in tubes and tube banks. Heat Transf Eng 13(3):58–81CrossRef

Webb RL, Kim NH (2005) Principles of enhanced heat transfer, 2nd edn. Taylor & Francis

Webb RL, Paek JW (2003) Letter to the editors—concerning paper published by Y.-Y. Yan and T.-F. Lin. Int J Heat Mass Transf 46:1111–1112CrossRef

Weiland 1991 Ripple fin tubes, Wieland-Werke AG brochure TKI-42e(M)-02.91, Ulm, Germany

Weisman J, Illeslamlou S (1988) A phenomenological model for prediction of critical heat flux under highly subcooled conditions. Fusion Technol 13:654–659CrossRef

Weisman J, Pei BS (1983) Prediction of critical heat flux in flow boiling at low qualities. Int J Heat Mass Transf 26(10):1463–1477CrossRef

Weisman J, Yang JY, Usman S (1994) A phenomenological model for boiling heat transfer and the critical heat flux in tubes containing twisted tapes. Int J Heat Mass Transf 37(1):69–80CrossRef

Wen MY, Hsieh SS (1995) Saturated flow boiling heat transfer in internally spirally knurled/integral finned tubes. J Heat Transf 117(1):245–248CrossRef

Wen MY, Jang KJ, Ho CY (2015) Flow boiling heat transfer in R-600a flows inside an annular tube with metallic porous inserts. J Enhanc Heat Transf 22(1)CrossRef

Withers JG, Habdas EP (1974) Heat transfer characteristics of helical-corrugated tubes for intube boiling of refrigerant R-12. AIChE Symp Ser 70:98–106

Yan YY, Lin TF (1998) Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe. Int J Heat Mass Transf 41(24):4183–4194CrossRef

Yan YY, Lin TF (1999) Evaporation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchanger. J Heat Transf 121(1):118–127CrossRef

Yasuda K, Ohizumi K, Hori M, Kawamata O (1990) Development of condensing thermofin-HEX-C tube. Hitachi Cable Rev:27–30

Yasunobu F, Yang Y, Fujita N (2002) Flow boiling heat transfer and pressure drop in uniformly heated small tubes. Heat Transf 3:743–748

Yilmaz S, Palen JW, Taboerk J (1981) Enhanced boiling surfaces as single tubes and tube bundles. In: Webb RL, Carnavos TC, Park EL, Hostetler KM (eds) Advances in enhanced heat transfer, HTD, vol 18, pp 123–130

Yoshida S, Matsunaga T, Hong HP, Nishikawa K (1987) Heat transfer to refrigerants in horizontal evaporator tubes with internal, spiral grooves. In: Proceedings of the 1987 ASME-JSME thermal engineering joint conference, vol 5, pp 165–172

Yu W, France DM, Wambsganss MW, Hull JR (2002) Two-phase pressure drop, boiling heat transfer, and critical heat flux to water in a small-diameter horizontal tube. Int J Multiphase Flow 28(6):927–941MATHCrossRef

Yu HL, Li RY, Huang X, Chen ZH (2004) EHD boiling heat transfer enhancement outside horizontal tubes. J Enhanc Heat Transf 11(4):291CrossRef

Zeng X, Chyu M, Ayub ZH (1998) Ammonia spray evaporation heat transfer performance of single low-fin and corrugated tubes. ASHRAE Trans 104(Pt.1):185–196

Zeng X, Chyu MC Ayub ZH (2000) An experimental study of spray evaporation of Ammonia in a square-pitch, low-fin tube bundle. In: Proceedings of the 34th national heat transfer conference, Pittsburgh, PA. NHTC, pp 2000–12215

Zhang Y, Wei J, Guo D (2012) Enhancement of flow-jet combined boiling heat transfer of FC-72 over micro-pin-finned surfaces. J Enhanc Heat Transf 19(6):489CrossRef

Zhao Y, Molki M, Ohadi MM, Dessiatoun SV (2000) Flow boiling of CO₂ in microchannels. Univ. of Maryland, College Park, MD

Zhao Y, Molki M, Ohadi MM 2001 Predicting flow boiling heat transfer of C02 microchannels. In: Jaluria Y (ed) Proceedings of the ASME, HTD, Vol 369-3. ASME international mechanical engineering congress and exposition, ASME, New York, pp 195–204

Zhou DW, Liu DY, Cheng P (2004) Boiling heat transfer characteristics from a horizontal tube embedded in a porous medium with acoustic excitation. J Enhanc Heat Transf 11(3):231CrossRef

Titel: Flow Boiling Enhancement Techniques
verfasst von: Sujoy Kumar Saha
Hrishiraj Ranjan
Madhu Sruthi Emani
Anand Kumar Bharti
Verlag: Springer International Publishing
Buch: Two-Phase Heat Transfer Enhancement
Print ISBN: 978-3-030-20754-0

Electronic ISBN: 978-3-030-20755-7

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-20755-7_3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht