nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Graph-Based Analysis of Tool Life Parameters of the Turning Process in Small-Lot Production

verfasst von : Sara Moghadaszadeh Bazaz, Juho Ratava, Mika Lohtander, Juha Varis

Erschienen in: Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Estimating tool life in small-lot production uses the same tool to optimize production plans of different products with various geometry and material. Process planning in small-lot production influences production efficiency, energy consumption, time, and cost. This paper studies the parameters that affect tool life in the turning process for small lot production. The paper expresses some parameters that affect tool life and other factors which impact these parameters. The results of this research are represented as a complex web of interdependencies and a relationship matrix. The relationship matrix illustrates the direct and indirect interdependencies of the parameters which influence tool life in the turning process. Moreover, the graph-based analysis demonstrates the weight of the parameters in estimating tool life in small-lot production. Finally, the results show which parameters have the most effect on tool life to consider in conducting a production plan to manufacture different products with different geometry and material using the same tool.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Use of Auxetic Infill Structures for the Compensation of Shrinkage in Fused Filament Fabrication Process

Nächstes Kapitel Milling a Titanium Alloy Using Different Machining Parameters: A Comparative Study on Tool Wear, Tool Life and Performance

Groover, M.P.: Fundamentals of Modern Manufacturing: Materials, Processes, and Systems. Wiley (2020)

Trent, E.M., Wright, P.K.: Metal Cutting. Butterworth-Heinemann (2000)

Kalpakjian, S.: Manufacturing Engineering and Technology. Pearson Education India (2001)

Ham, I., Hitomi, K., Yoshida, T.: Group Technology: Applications to Production Management. Springer Science & Business Media (2012)

Ronen, B., Karp, R.: An information entropy approach to the small-lot concept. IEEE Trans. Eng. Manage. 41(1), 89–92 (1994). https://doi.org/10.1109/17.286340CrossRef

Zhang, Z., Tang, R., Peng, T., Tao, L., Jia, S.: A method for minimising the energy consumption of machining system: integration of process planning and scheduling. J. Clean. Prod. 20(137), 1647–1662 (2016). https://doi.org/10.1016/j.jclepro.2016.03.101CrossRef

Shaw, M.C., Cookson, J.O.: Metal Cutting Principles. Oxford University Press, New York (2005)

Stephenson, D.A., Agapiou, J.S.: Metal Cutting Theory and Practice. CRC Press (2016)

Talib, N.A.: Studying the effect of cutting speed and feed rate on tool life in the turning processes. Diyala J. Eng. Sci. Spec. Issue 22, 181–194 (2010)

10.

Ojolo, S.J., Ogunkomaiya, O.: A study of effects of machining parameters on tool life. Int. J. Mater. Sci. Appl. 3(5), 183–199 (2014). https://doi.org/10.11648/j.ijmsa.20140305.19CrossRef

11.

Agari, S.R.: Wear and surface characteristics on tool performance with CVD coating of Al₂O₃/TiCN inserts during machining of Inconel 718 alloys. Arch. Mech. Eng. (2021). https://doi.org/10.24425/ame.2021.139647CrossRef

12.

Varaprasad, Bh., Srinivasa Rao, Ch., Vinay, P.V.: Effect of machining parameters on tool wear in hard turning of AISI D3 steel. Procedia Eng. 1(97), 338–345 (2014). https://doi.org/10.1016/j.proeng.2014.12.257CrossRef

13.

Kulkarni, P.P., Kiran, J.O., Deeleepkumar, S.G.: Effect of tool nose radius and cutting parameters on tool life, surface roughness in turning of grey cast iron. Int. J. Eng. Sci. Technol. 6(3), 69 (2014)

14.

Sadilek, M., Čep, R., Sadilkova, Z., Valíček, J., Petřkovská, L.: Increasing tool life during turning with a variable depth of cut. Mater. Technol. 47, 199–203 (2013)

15.

Sadílek, M., Dubský, J., Sadílková, Z., Poruba, Z.: Cutting forces during turning with variable depth of cut. Perspect. Sci. 1(7), 357–363 (2016)CrossRef

16.

Lokireddi, V.G., Vajrapu, S.S., Vijay, S.: Performance analysis of uncoated tools for machining of hard to cut materials. Mater. Today Proc. (2021). https://doi.org/10.1016/j.matpr.2021.10.033CrossRef

17.

Kumar, M.P., Ramakrishna, N., Amarnath, K., Kumar, M.S.: Study on tool life and its failure mechanisms. Int. J. Innov. Res. Sci. Technol. 2, 126–131 (2015)

18.

Hughes, J.I., Sharman, A.R., Ridgway, K.: The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 220(2), 93–107 (2006). https://doi.org/10.1243/095440506X78192CrossRef

19.

Davim, J.P., Maranhão, C., Faria, P., Abrão, A., Rubio, J.C., Silva, L.R.: Precision radial turning of AISI D2 steel. Int. J. Adv. Manuf. Technol. 42(9), 842–849 (2009)CrossRef

20.

Velan, M.V., Shree, M.S., Muthuswamy, P.: Effect of cutting parameters and high-pressure coolant on forces, surface roughness and tool life in turning AISI 1045 steel. Mater. Today Proc. 1(43), 482–489 (2021). https://doi.org/10.1016/j.matpr.2020.12.020CrossRef

21.

Kataoka, R., Shamoto, E.: Influence of vibration in cutting on tool flank wear: fundamental study by conducting a cutting experiment with forced vibration in the depth-of-cut direction. Precis. Eng. 1(55), 322–329 (2019). https://doi.org/10.1016/j.precisioneng.2018.09.021CrossRef

22.

Oraby, S.E., Hayhurst, D.R.: Tool life determination based on the measurement of wear and tool force ratio variation. Int. J. Mach. Tools Manuf. 44(12–13), 1261–1269 (2004). https://doi.org/10.1016/j.ijmachtools.2004.04.018CrossRef

23.

Ogedengbe, T.S., et al.: The effects of heat generation on cutting tool and machined workpiece. J. Phys. Conf. Ser. 1378(2), 022012 (2019)

24.

Kim, D.M., Kim, H.I., Park, H.W.: Tool wear, economic costs, and CO₂ emissions analysis in cryogenic assisted hard-turning process of AISI 52100 steel. Sustain. Mater. Technol. 1(30), e00349 (2021). https://doi.org/10.1016/j.susmat.2021.e00349CrossRef

25.

Shokrani, A., Dhokia, V., Newman, S.T.: Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. Int. J. Mach. Tools Manuf. 1(57), 83–101 (2012). https://doi.org/10.1016/j.ijmachtools.2012.02.002CrossRef

26.

Ji, J., Yang, Q., Chen, P., Lu, K., Wu, Y.: An improved mathematical model of cutting temperature in end milling Al7050 based on the influence of tool geometry parameters and milling parameters. Math. Probl. Eng. 21, 2021 (2021)

27.

Hagberg, W.: Temperature effect on insert tool life in dry machining (2021)

28.

Abukhshim, N.A., Mativenga, P.T., Sheikh, M.A.: An investigation of the tool-chip contact length and wear in high-speed turning of EN19 steel. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 218(8), 889–903 (2004). https://doi.org/10.1243/0954405041486064CrossRef

29.

Buranská, E., Gerulová, K., Buranský, I.: Influence of cutting environment on tool life. Res. Pap. Fac. Mater. Sci. Technol. Slov. Univ. Technol. 24(38), 9–15 (2016). https://doi.org/10.1515/rput-2016-0033CrossRef

30.

Thakur, A., Mohanty, A., Gangopadhyay, S., Maity, K.P.: Tool wear and chip characteristics during dry turning of Inconel 825. Procedia Mater. Sci. 1(5), 2169–2177 (2014). https://doi.org/10.1016/j.mspro.2014.07.422CrossRef

31.

Sandvik, C.: Modern Metal Cutting—A Practical Handbook. Tofters Tryckeri AB, Idereklam, Sandviken (1994)

Titel: Graph-Based Analysis of Tool Life Parameters of the Turning Process in Small-Lot Production
verfasst von: Sara Moghadaszadeh Bazaz
Juho Ratava
Mika Lohtander
Juha Varis
Verlag: Springer International Publishing
Buch: Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus
Print ISBN: 978-3-031-17628-9

Electronic ISBN: 978-3-031-17629-6

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-17629-6_16

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten