nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

5. Hardness, Friction and Wear Trends of Electroless Ni-W-P Coating Heat-Treated at Different Temperatures

verfasst von : Abhijit Biswas, Suman Kalyan Das, Prasanta Sahoo

Erschienen in: Advances in Materials, Mechanical and Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The motive of this work is to analyze the effect of heating temperature on hardness along with wear characteristics of electroless Ni-W-P coating. In binary (Ni-P) coating, tungsten (around 5.22 wt%) is incorporated and heat-treated at 200, 400 and 800 °C for constant time period (1 h). Hardness and tribological tests are conducted on both as-deposited and heat-treated specimens. Hardness is found to be in a co-relative state with wear resistance for the present coatings. However, hardness as well as wear resistance decreases upon heat treatment at 800 °C. Ni-W-P coating is also found to display a quite low and stable COF value with testing duration. Microstructural analysis shows the morphology of the coating to be nodular. With heat treatment, the coating turns fully crystalline with the precipitation of harder Ni₃P phases. At higher temperature, oxide formation over the coating is also observed. Both abrasive and adhesive wear mechanisms are found to govern the wear behavior of the present electroless Ni-W-P coatings. It is found that inclusion of tungsten promotes the tribological properties of Ni-P coatings even when subjected to high-temperature heat treatment.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Friction and Wear Characteristics of Heat Treated Electroless Ni–P–W Coatings Under Elevated Temperature

Nächstes Kapitel Transition Reference Temperature for 20MnMoNi55 RPV Steel at Different Loading Rates

Sahoo, P., Das, S.K.: Tribology of electroless nickel coatings—a review. Mater. Des. 32(4), 1760–1775 (2011)CrossRef

Brenner, A., Riddell, G.E.: Nickel plating on steel by chemical reduction. J. Res. Natl. Bur. Stand. 37(1), 31–34 (1946)CrossRef

Agarwala, R.C., Agarwala, V.: Electroless alloy/composite coatings: a review. Sadhana 28(3), 475–493 (2003)MathSciNetCrossRef

Biswas, A., Das, S.K., Sahoo, P.: Effect of heat treatment duration on tribological behavior of electroless Ni-(high)P coatings. IOP Conf. Ser. Mater. Sci. Eng. 149(1), 012045 (2016)CrossRef

Keong, K.G., Sha, W., Malinov, S.: Hardness evolution of electroless nickel–phosphorus deposits with thermal processing. Surf. Coat. Technol. 168(2), 263–274 (2003)CrossRef

Biswas, A., Das, S.K., Sahoo, P.: Correlating tribological performance with phase transformation behavior for electroless Ni-(high)P coating. Surf. Coat. Technol. 328(Supplement C), 102–114 (2017)CrossRef

Yoon, J.W., Park, J.H., Shur, C.C., Jung, S.B.: Characteristic evaluation of electroless nickel–phosphorus deposits with different phosphorus contents. Microelectron. Eng. 84(11), 2552–2557 (2007)CrossRef

Liu, H., Guo, R.X., Liu, Z.: Effects of laser nanocrystallisation on the wear behaviour of electroless Ni–W–P coatings. Surf. Coat. Technol. 219(Supplement C), 31–41 (2013)CrossRef

Guo, Z., Keong, K.G., Sha, W.: Crystallisation and phase transformation behaviour of electroless nickel phosphorus platings during continuous heating. J. Alloy. Compd. 358(1), 112–119 (2003)CrossRef

10.

Erming, M., Shoufu, L., Pengxing, L.: A transmission electron microscopy study on the crystallization of amorphous Ni-P electroless deposited coatings, Metallurgical Coatings. In: Proceedings of the 15th International Conference on Metallurgical Coatings, pp. 273–280 (1988)

11.

Keong, K.G., Sha, W., Malinov, S.: Crystallisation kinetics and phase transformation behaviour of electroless nickel–phosphorus deposits with high phosphorus content. J. Alloy. Compd. 334(1), 192–199 (2002)CrossRef

12.

Hou, K.H., Jeng, M.C., Ger, M.D.: The heat treatment effects on the structure and wear behavior of pulse electroforming Ni–P alloy coatings. J. Alloy. Compd. 437(1), 289–297 (2007)CrossRef

13.

Tomlinson, W.J., Wilson, G.R.: The oxidation of electroless Ni-B and Ni-P coatings in air at 800 to 1000°C. J. Mater. Sci. 21(1), 97–102 (1986)CrossRef

14.

Balaraju, J.N., Rajam, K.S.: Electroless deposition of Ni–Cu–P, Ni–W–P and Ni–W–Cu–P alloys. Surf. Coat. Technol. 195(2), 154–161 (2005)CrossRef

15.

Palaniappa, M., Seshadri, S.K.: Structural and phase transformation behaviour of electroless Ni–P and Ni–W–P deposits. Mater. Sci. Eng. A 460–461(Supplement C), 638–644 (2007)CrossRef

16.

Hu, Y., Wang, T., Meng, J., Rao, Q.: Structure and phase transformation behaviour of electroless Ni–W–P on aluminium alloy. Surf. Coat. Technol. 201(3), 988–992 (2006)CrossRef

17.

Allahyarzadeh, M.H., Aliofkhazraei, M., Rezvanian, A.R., Torabinejad, V., Rouhaghdam, A.R.S.: Ni-W electrodeposited coatings: characterization, properties and applications. Surf. Coat. Technol. 307(Part A), 978–1010 (2016)CrossRef

18.

Roy, S., Sahoo, P.: Optimization of multiple roughness characteristics of chemically deposited Ni-PW coating using weighted principal component analysis. ISRN Mechanical Engineering, Article ID 495857, pp. 7 pages (2012)

19.

Hu, Y.J., Xiong, L., Meng, J.: Electron microscopic study on interfacial characterization of electroless Ni–W–P plating on aluminium alloy. Appl. Surf. Sci. 253(11), 5029–5034 (2007)CrossRef

20.

Selvi, V.E., Chatterji, P., Subramanian, S., Balaraju, J.N.: Autocatalytic duplex Ni–P/Ni–W–P coatings on AZ31B magnesium alloy. Surf. Coat. Technol. 240(Supplement C), 103–109 (2014)CrossRef

21.

Tsai, Y.Y., Wu, F.B., Chen, Y.I., Peng, P.J., Duh, J.G., Tsai, S.Y.: Thermal stability and mechanical properties of Ni–W–P electroless deposits. Surf. Coat. Technol. 146–147(Supplement C), 502–507 (2001)CrossRef

22.

Mukhopadhyay, A., Duari, S., Barman, T.K., Sahoo, P.: Investigation of wear behavior of electroless Ni-PW coating under dry and lubricated conditions using RSM and fuzzy logic. Portugaliae Electrochimica Acta 34(4), 231–255 (2016)CrossRef

23.

Eraslan, S., Ürgen, M.: Oxidation behavior of electroless Ni–P, Ni–B and Ni–W–B coatings deposited on steel substrates. Surf. Coat. Technol. 265(Supplement C), 46–52 (2015)CrossRef

24.

Duari, S., Mukhopadhyay, A., Barman, T.K., Sahoo, P.: Tribological performance optimization of electroless nickel coatings under lubricated condition. In: Design and Optimization of Mechanical Engineering Products IGI Global, pp. 250–280 (2018)

25.

Mukhopadhyay, A., Barman, T.K., Sahoo, P.: Tribological behavior of sodium borohydride reduced electroless nickel alloy coatings at room and elevated temperatures. Surf. Coat. Technol. 321, 464–476 (2017)CrossRef

26.

Mukhopadhyay, A., Duari, S., Barman, T.K., Sahoo, P.: Wear behavior of electroless Ni-P-W coating under lubricated condition—a Taguchi based approach. IOP Conf. Ser. Mater. Sci. Eng. 149(1), 012004 (2016)CrossRef

27.

Duari, S., Mukhopadhyay, A., Barman, T.K., Sahoo, P.: Study of wear and friction of chemically deposited Ni-P-W coating under dry and lubricated condition. Surf. Interfaces 6, 177–189 (2017)CrossRef

28.

Sahoo, P., Roy, S.: Tribological behavior of electroless Ni-P, Ni-P-W and Ni-P-Cu coatings: a comparison. Int. J. Surf. Eng. Interdisc. Mater. Sci. (IJSEIMS) 5(1), 1–15 (2017)

29.

Mukhopadhyay, A., Barman, T.K., Sahoo, P.: Tribological behavior of electroless Ni–B–W coating at room and elevated temperatures. In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, pp. 1350650118755781 (2018)

30.

Palaniappa, M., Seshadri, S.K.: Friction and wear behavior of electroless Ni–P and Ni–W–P alloy coatings. Wear 265(5), 735–740 (2008)CrossRef

31.

Balaraju, J.N., Raman, N., Manikandanath, N.T.: Nanocrystalline electroless nickel poly-alloy deposition: incorporation of W and Mo. Trans. IMF 92(3), 169–176 (2014)CrossRef

32.

Balaraju, J.N., Kalavati, Rajam, K.S.: Surface morphology and structure of electroless ternary NiWP deposits with various W and P contents. J. Alloy. Compd. 486(1), 468–473 (2009)CrossRef

33.

Wu, F.B., Tien, S.K., Chen, W.Y., Duh, J.G.: Microstructure evaluation and strengthening mechanism of Ni–P–W alloy coatings. Surf. Coat. Technol. 177–178(Supplement C), 312–316 (2004)CrossRef

34.

Tien, S.K., Duh, J.G., Chen, Y.I.: The influence of thermal treatment on the microstructure and hardness in electroless Ni–P–W deposit. Thin Solid Films 469–470(Supplement C), 333–338 (2004)CrossRef

35.

Koiwa, I., Usuda, M., Osaka, T.: Effect of heat-treatment on the structure and resistivity of electroless Ni-W-P alloy films. J. Electrochem. Soc. 135(5), 1222–1228 (1988)CrossRef

36.

Mukhopadhyay, A., Duari, S., Barman, T.K., Sahoo, P.: Optimization of wear behavior of electroless Ni-PW coating under dry and lubricated conditions using genetic algorithm (GA). Jurnal Tribologi 11, 24–48 (2016)

37.

Krishnaveni, K., Sankara Narayanan, T.S.N., Seshadri, S.K.: Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surf. Coat. Technol. 190(1), 115–121 (2005)CrossRef

38.

Karthikeyan, S., Vijayaraghavan, L.: Investigation of the surface properties of heat treated electroless Ni–P coating. Trans. IMF 94(5), 265–273 (2016)CrossRef

39.

Sahoo, P.: Wear behaviour of electroless Ni–P coatings and optimization of process parameters using Taguchi method. Mater. Des. 30(4), 1341–1349 (2009)CrossRef

40.

Sahoo, P., Pal, S.K.: Tribological performance optimization of electroless Ni–P coatings using the Taguchi method and grey relational analysis. Tribol. Lett. 28(2), 191–201 (2007)CrossRef

41.

Gawne, D.T., Ma, U.: Wear mechanisms in electroless nickel coatings. Wear 120(2), 125–149 (1987)CrossRef

42.

Kundu, S., Das, S.K., Sahoo, P.: Tribological behaviour of electroless Ni-P deposits under elevated temperature. Silicon, 1–14 (2016)

Titel: Hardness, Friction and Wear Trends of Electroless Ni-W-P Coating Heat-Treated at Different Temperatures
verfasst von: Abhijit Biswas
Suman Kalyan Das
Prasanta Sahoo
Verlag: Springer International Publishing
Buch: Advances in Materials, Mechanical and Industrial Engineering
Print ISBN: 978-3-319-96967-1

Electronic ISBN: 978-3-319-96968-8

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-96968-8_5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht