nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

9. Heat Sink Basics from an Industrial Point of View

verfasst von : Clemens J. M. Lasance

Erschienen in: Thermal Management for LED Applications

Verlag: Springer New York

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Several other chapters (especially, Chap. 1 and 2) focus on the complexity of the physics that determines the performance of light-emitting diode (LED)-based systems. It is evident that temperature plays a significant role in optimizing light output and reliability. In many cases, the area available for cooling for a medium to high power LED is insufficient and hence area extension is required, usually by means of a local heat sink (using heat pipes to transfer the heat to where sufficient area is available is another option). Hence, an important way of controlling the temperature is by a proper choice of a heat sink. While in many applications the design freedom is limited, such as in retrofit LED lamps, the designer is still confronted with many questions: shape, number of fins, fin thickness, gap between fins, base dimensions, material, etc. Since literally thousands of heat sinks are available, many designers are confronted with the question: which one? Very often, the designer’s choice is based on cost and manufacturer’s data. Unfortunately, these data cannot be used with confidence because they are almost exclusively based on measurements in a closed duct, thereby disregarding bypass effects and inflow conditions.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Advances in Thermal Interface Materials for Power LED Applications

Nächstes Kapitel Considerations for an Optimal Choice of Heat Sinks for LED Applications

Bejan is also the author of the book titled Convection Heat Transfer [71]. A.o, he derives common analytical correlations starting from simple scaling laws, and criticizes the common interpretation of numbers such as Re on the grounds that it is total nonsense.

Iyengar and Bar-Cohen use the term “array heat transfer coefficient” for our “effective heat transfer coefficient,” and they use thermal metrics such as the space-claim heat transfer coefficient for our volume–weighted h [38]

Lasance C (2010) How to estimate heat spreading effects in practice. J Electron Packag 132:031004CrossRef

Lasance C (2004) The influence of various common assumptions on the boundary-condition-independence of compact thermal models. IEEE CPT 27:523–529

Lee S (1995) Calculating spreading resistance in heat sinks. Electron Cool 1(January Issue)

Lasance C (2008) Heat spreading: not a trivial problem. Electron Cool 14(May issue): 24–30

Kraus A, Bar-Cohen A (1995) Design and analysis of heat sinks. Wiley, New York p 61

Maheswaran U, Sekhar S (2006) Evaluation of concepts of fin efficiency using monte carlo simulation method. Int J Heat Mass Transf 49:1643–1646CrossRefMATH

Lasance C (2008) Ten years of boundary-condition-independent compact thermal modeling of electronic parts: a review. Heat Transf Eng 29:149–169CrossRef

http://www.electronics-cooling.com/1997/09/standardizing-heat-sink-characterization-for-forced-convection/

Moffat R (2008) Modeling air-cooled heat sinks at heat exchangers. Electron Cool (February)

10.

Azar K, Tavassoli B (2003) How much heat can be extracted from a heat sink? Electron Cool (May)

11.

Simons R (2006) A simple thermal resistance model—isoflux versus Isothermal. Electron Cool (February)

12.

Lasance C (2005) Sense and nonsense of heat transfer correlations applied to electronics cooling. Proceedings of EUROSIME pp 8–16

13.

Moffat R (2007) Modeling Air-Cooled heat sinks as heat exchangers. In: Proceedings of the 23rd IEEE SEMI-THERM Conference 20–22 March 2007

14.

Webb R (2007) Heat exchanger design methodology for electronic heat sinks. Transactions of the ASME. J Heat Transf 129(7):899–901CrossRef

15.

Starner K, MacManus H (1963) An experimental investigation of free convection heat transfer from rectangular fin arrays. J Heat Transf 85:273–278CrossRef

16.

Welling W, Wooldrigde C (1965) Free convection heat transfer coefficients from rectangular vertical fins. J Heat Transf 87:439–444CrossRef

17.

Van de Pol DW, Tierney JK (1974) Free convection heat transfer from vertical FinArrays. IEEE Trans Part Hybrids Packag PHP 10(4):267–271CrossRef

18.

Bilitzky A (1986) The effect of geometry on heat transfer by free convection from a fin array, MS Thesis, Dept. of Mechanical Engineering, Ben-Gurion University of The Negev, Beer Sheva, Israel

19.

Kim T, Do K, Kim D (2011) Closed form correlations for thermal optimization of plate-fin heat sinks under natural convection. Int J Heat Mass Tran 54:1210–1216CrossRefMATH

20.

Kraus A, Bar-Cohen A (1995) Design and analysis of heat sinks. John Wiley, p. 275

21.

Holahan MF, Kang SS, Bar-Cohen A (1996) A Flowstream based analytical model for design of parallel plate heat sinks. In: ASME Proceedings of the 31st National Heat Transfer Conference, HTD-Vol. 329, Volume 7, pp. 63–71

22.

Kakac S, Shah RK, Aung W (1987) Handbook of single-phase convective heat transfer, 2nd edn. Wiley, New York, pp 3–35, 3–42

23.

Biber C, Belady C (1997) Pressure drop prediction for heat sinks: what is the best method? In: Proceedings of Interpack’ 97 Conference, ASME, Mauna Lani, Hawaii

24.

http://www.coolingzone.com/library.php?read=489

25.

http://www.coolingzone.com/library.php?read=490

26.

http://www.coolingzone.com/library.php?read=491

27.

Simons B (2011) Calculation corner: a useful catalog of calculation corner articles. ElectronicsCooling (September)

28.

Bahadur R (2005) Characterization, modeling, and optimization of polymer composite pin fins, Thesis University Of Maryland (http://drum.lib.umd.edu/handle/1903/2821)

29.

Bar-Cohen A, Bahadur R, Iyengar M (2006) Least-energy optimization of air-cooled heat sinks for sustainability-theory, geometry and material selection. Energy 31:579–619CrossRef

30.

Khan WA, Culham JR, Yovanovich MM (2005) Optimization of pin-fin heat sinks using entropy generation minimization. IEEE Trans Compon Packag Technol 28(2):247–254CrossRef

31.

Khan WA, Culham JR, Yovanovich MM (2008) Modeling of cylindrical pin-fin heat sinks for electronic packaging. IEEE Trans Compon Packag Technol 31(3):536–545CrossRef

32.

Ledezma G, Bejan A (1996) Heat sinks with sloped plate fins in natural and forced convection. Int J Heat Mass Trans 39(9):1773–1783CrossRef

33.

Naidu SV, Dharma Rao V, Govinda Rao B, Sombabu A, Sreenivasulu B (2010) Natural convection heat transfer from fin arrays: experimental and theoretical study on effect of inclination of base on heat transfer. ARPN J Eng Appl Sci 5(9)

34.

http://frigprim.x10.mx/articels2/parallel_pl_Inc.html

35.

Elenbaas W (1942) Heat dissipation of parallel plates by free convection. Physica 9:1–28CrossRef

36.

Bar-Cohen A, Rohsenow W (1983) Thermally-optimum arrays of cards and fins in natural convection. IEEE CHMT CHMT 6:154–158

37.

Iyengar M, Bar-Cohen A (1998) Least-material optimization of vertical pin-fin, plate-fin, and triangular-fin heat sinks in natural convective heat transfer. In: Proceedings of the ITHERM Conference, Seattle, USA, pp 295–302

38.

Bar-Cohen A, Iyengar M, Kraus AD (2003) Design of optimum plate fin natural convection heat sinks. ASME Trans—J Electron Packag 125(2):208–216CrossRef

39.

Bahadur R, Bar-Cohen A (2005) Thermal design and optimization of polymer-based pin fin natural convection heat sinks. IEEE Trans Compon Packag Technol 28(2):238–246CrossRef

40.

Biber C, Fijol S (1999) Fan-plus-Heatsink “optimization”—mechanical and thermal design with reality. In: Proceedings of the international systems packaging symposium, pp 285–289

41.

Knight R, Goodling J, Hall D (1991) Optimal thermal design of forced convection heat sinks-analytical. JEP 113:313–321

42.

Teertstra P, Yovanovich MM, Culham JR, Lemczyk T (1999) Analytical forced convection modeling of plate fin heat sinks. In: Proceedings of 15th IEEE SEMI-THERM

43.

Iyengar M, Bar-Cohen A (2001) Design for manufacturability of SISE parallel plate forced convection heat sinks. Trans of the IEEE-CPT 24(2):150–158

44.

Copeland D (2003) Fundamental performance limits of heat sinks. JEP 125:221

45.

Bejan A (1996) Entropy generation minimization. CRC, OrlandoMATH

46.

Shih C, C Liu G (2004) Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy. IEEE trans compon packag technol 27(3):551–559CrossRef

47.

Bar-Cohen A, Bahadur R, Iyengar M (2006) Least-energy optimization of air-cooled heat sinks for sustainability-theory, geometry and material selection. Energy 31:579–619CrossRef

48.

Bejan A (1975) Improved thermal design of the cryogenic cooling system for a superconducting synchronous generator. Thesis. Ph.D.–Massachusetts Institute of Technology. Dept. of Mechanical Engineering

49.

http://www.constructal.org/

50.

Silva AK da, Bejan A (2005) Constructal multi-scale structure for maximal heat transfer density in natural convection, Int. J Heat Fluid Flow 26:34–44CrossRef

51.

Teerstra P, Yovanovich M, Culham J (2000) Natural convection modeling of heat sinks using web-based tools, ElectronicsCooling (September)

52.

http://www.mhtl.uwaterloo.ca

53.

http://www.novelconceptsinc.com/calculators-forced-convection-heat-sink-thermal-resistance.cgi

54.

http://www.heatsinkdesigner.com/

55.

http://www.qfin.net/drupal/qfin47

56.

Lasance C (2002) The conceivable accuracy of experimental and numerical thermal analyzes of electronic systems. IEEE CPT 25:366–382

57.

Lasance C (2005) CFD simulations in electronic systems: a lot of pitfalls and a few remedies. Electron Cool 11(2):20–27

58.

Lasance C, Rindt C (2007) Accuracy comparison of a standard CFD code for the thermal analysis of non-simple geometries with baseline experiments. In: Proceedings of 23rd SEMI-THERM, San Jose, CA

59.

Rodgers P, Eveloy V (2004) CFD prediction of electronic component operational temperature on PCBs. Electron Cool 10(2):22–28

60.

Lasance C, Aarts R (2008) Synthetic jet cooling Part I: overview of heat transfer and acoustics. In: Proceedings of SEMI-THERM 24: San Jose

61.

Lasance C, Aarts R, Ouweltjes O (2008) Synthetic jet cooling Part II: experimental results of an acoustic dipole cooler. In: Proceedings of SEMI-THERM 24

62.

Lasance C, Nicole C, Aarts R, Ouweltjes O, Kooijman G, Nieuwendijk J (2009) Synthetic jet cooling using asymmetric dipoles. In: Proceedings of SEMI-THERM 25 San Jose

63.

Lasance C (2008) Ten years of boundary-condition-independent compact thermal modeling of electronic parts: a review. Heat Transf Eng 29:149–169CrossRef

64.

Lasance C, Eggink H, (2005) A method to rank heat sinks in practice: the heat sink performance tester. In: Proceedings of 21st SEMI-THERM, pp 141–145, San Jose, CA

65.

Copeland D (moderator) (2003) Modeling, optimization and performance of heat sinks with non-traditional flow and fin geometries. Panel Session at Interpack, Maui

66.

Lasance C (2003) Thermal capacitance. Electron Cool 9 (May)

67.

Coetzer C, Visser J (2003) Compact modeling of forced flow in longitudinal fin heat sinks with tip bypass. J Electron Packag 125:319–324CrossRef

68.

Dong T, Narendran N (2009) Understanding heat transfer mechanisms in recessed LED luminaires. In: Ninth International Conference on Solid State Lighting, August 3–5, 2009, San Diego, Proceedings of SPIE 7422: 74220V.

69.

Moffat R, Ortega A (1988) Chapter 3 in advances in thermal modeling of electronic components and systems, vol 1, ed. Bar-Cohen and Kraus, Hemisphere

70.

Lasance C (2010) Thermal facts and fairy tales: fully-developed channel flow: why is Nu constant? Electron Cool (September 2010)

71.

Bejan A (2004) Convection heat transfer, Wiley Fourth Edition, 2013

Titel: Heat Sink Basics from an Industrial Point of View
verfasst von: Clemens J. M. Lasance
Verlag: Springer New York
Buch: Thermal Management for LED Applications
Print ISBN: 978-1-4614-5090-0

Electronic ISBN: 978-1-4614-5091-7

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-1-4614-5091-7_9