nach oben

Erschienen in:

2009 | OriginalPaper | Buchkapitel

12. High-Temperature Samarium Cobalt Permanent Magnets

verfasst von : Oliver Gutfleisch

Erschienen in: Nanoscale Magnetic Materials and Applications

Verlag: Springer US

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter reviews the development of SmCo-type magnets over the last 40 years. First, the physical metallurgy and crystal structures are considered; then the focus is on the recent developments in high-temperature Sm(Co_balFe_wCu_xZr_y)_z magnets suitable for operation temperatures up to 500°C. It is elucidated that the evolution of coercivity and microchemistry in the respective phases of the heterogeneous nanostructure as well as magnetic domain structure is very sensitive to details of the processing procedure, especially to the slow cooling ramp as the last step where the hard magnetic properties evolve. These changes give rise to rather complex pinning mechanisms in a three-phase precipitation structure, which again depend in a subtle manner on the microchemistry of the 1:5-type cell boundary phase in the 2:17-type magnets. It is the amount and distribution of Cu in and at the cell boundary phase which is the prevalent factor determining the pinning strength and which can yield a non-monotonic temperature dependence of coercivity. The chapter concludes with an overview of novel non-equilibrium processing routes used to obtain SmCo-type nanocomposites.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Exchange-Coupled Nanocomposite Permanent Magnets

Nächstes Kapitel Nanostructured Soft Magnetic Materials

Al-Omari, I.A., J. Shobaki, R. Skomski, D. Leslie-Pelecky, J. Zhou and D.J. Sellmyer. (2002). High-temperature magnetic properties of SmCo_6.7 ₋ _xCu_0.6Ti_x magnets. Physica B: Cond. Matter 321: 107–111.CrossRef

Barthem, V.M.T.S., D. Givord, M.F. Rossignol and P. Tenaud. (2002). An approach to coercivity relating coercive field and activation volume. Physica B 319: 127–132.CrossRef

Buschow, K.H.J. and A.S. van der Goot. (1968). Intermetallic compounds in the system samarium-cobalt. J. Less-Common Met. 14: 323–328.CrossRef

Buschow, K.H.J. and A.S. van der Goot. (1971). Composition and crystal structure of hexagonal Cu-rich rare earth-copper compounds. Acta Cryst. B 27: 1085–1088.CrossRef

Buschow, K.H.J., (1989). Chapter 1, Permanent magnet materials based on 3d-rich ternary compounds. In: Ferromagnetic Materials, vol. 4, E. P. Wohlfarth and K.H.J. Buschow (eds.), North-Holland Elsevier, Amsterdam, Netherlands.

Buschow, K.H.J. (1997). Chapter 4, Magnetism and processing of permanent magnet materials. In: Handbook of Magnetic Materials, vol. 10, K.H.J. Buschow (ed.), North Holland Elsevier, Amsterdam, Netherlands.

Cataldo, L., A. Lefevre, F. Ducret, M.Th. Cohen-Adat, C.H. Allibert and N. Valignat. (1996). Binary system Sm-Co: revision of the phase diagram in the Co rich field. J. Alloys Comp. 241: 216–223.CrossRef

Chen, C., M.S. Walmer, M.H. Walmer, S. Liu, G.E. Kuhl and G. Simon. (1998). Sm₂(Co, Fe, Cu, Zr)₁₇ magnets for use at temperature ≥ 400ºC. J. Appl. Phys. 83: 6706–6708.CrossRef

Chen, C., M.S. Walmer, M.H. Walmer, S. Liu, G.E. Kuhl and G.K. Simon. (1999). New series of Sm₂TM₁₇ magnet materials for application at temperatures up to 550°C. In: MRS Symp. Proc. Advanced Hard and Soft Magnets, vol. 577, J. Fidler, M. Coey et al. (eds.), Materials Research Society, Pittsburgh, USA, pp. 277–287.

10.

Chen, C., M.H. Walmer, E.H. Kottcamp and W. Gong. (2001). Surface reaction and Sm depletion at 550°C for high temperature Sm-TM magnets. IEEE Trans. Mag. 37: 2531–2533.CrossRef

11.

Chikazumi, S. (1997). Physics of Ferromagnetism, 2nd ed. Oxford Science Publications, Oxford, p. 276.

12.

Coey, J.M.D. (ed.). (1996) Rare Earth Iron Permanent Magnets. Clarendon Press, Oxford, UK.

13.

Craik, D.J. and E.D. Isaac. (1960). Magnetic interaction domains. Proc. Phys. Soc. (Research Notes) 76.

14.

Cullity, B.D. (1972). Introduction to Magnetic Materials. Addison-Wesley Publishing Company, Reading, MA.

15.

Delannay, F., S. Derkaoui and C.H. Allibert. (1987a). The influence of zirconium on Sm(CoFeCuZr)_7.2 alloys for permanent magnets I: identification of the phases by transmission electron microscopy. J. Less-Common Met. 134: 249–262.CrossRef

16.

Delannay, F., S. Derkaoui and C.H. Allibert. (1987b). Transmission electron microscopy of Sm(CoFeCuZr)_7.2 alloys for permanent magnet. Micron Microscopica Acta 18: 243.CrossRef

17.

Derkaoui, S., C.H. Allibert, F. Delannay and J. Laforest. (1987). The influence of zirconium on Sm(Co,Fe,Cu,Zr)_7.2 alloys for permanent magnets II: composition and lattice constants of the phases in heat-treated materials. J. Less-Common Met. 136: 75–86.CrossRef

18.

Derkaoui, S. and C.H. Allibert. (1989). Redetermination of the phase equilibria in the system Sm-Co-Cu for Sm content 0–20 at.% at 850°C. J. Less-Common Met. 154: 309–315.CrossRef

19.

Derkaoui, S., N. Valignat and C.H. Allibert. (1996a). Co corner of the system Sm-Co-Zr: decomposition of the phase 1:7 and equilibria at 850°C. J. Alloys Comp. 235: 112–119.CrossRef

20.

Derkaoui, S., N. Valignat and C.H. Allibert. (1996b). Phase equilibria at 1150°C in the Co-rich alloys Sm-Co-Zr and structure of the 1:7 phase. J. Alloys Comp. 232: 296–301.CrossRef

21.

Ding, J., P.G. McCormick and R. Street. (1994). A study of Sm₁₃(Co_1-xFe_x)₈₇ prepared by mechanical alloying. J. Magn. Magn. Mat. 135: 200–204.CrossRef

22.

Durst, K.D. and H. Kronmüller. (1985). Magnetic hardening mechanisms in sintered Nd-Fe-B and Sm(Co,Fe,Cu,Zr)_7.6 permanent magnets. Proc. 4th Int. Symp. Magn. Anisotropy and Coercivity in RETM Alloys, Dayton, USA, pp. 725–735.

23.

Durst, K.D., H. Kronmüller, F.T. Parker and H. Oesterreicher. (1986). Temperature dependence of coercivity of cellular Sm₂Co₁₇-SmCo₅ permanent magnets. Phys. Stat. Sol. (a) 95: 213–219.CrossRef

24.

Durst, K.D., H. Kronmüller and W. Ervens. (1988a). Investigations of the magnetic properties and demagnetisation processes of an extremely high coercive Sm(Co,Cu,Fe,Zr)_7.6 permanent magnet – I Determination of intrinsic magnetic material parameters. Phys. Stat. Sol. (a) 108: 403–416.CrossRef

25.

Durst, K.D., H. Kronmüller and W. Ervens. (1988b). Investigations of the magnetic properties and demagnetisation processes of an extremely high coercive Sm(Co,Cu,Fe,Zr)_7.6 permanent magnet – II The coercivity mechanism. Phys. Stat. Sol. (a) 108: 705–719.CrossRef

26.

Ervens, W. (1979). Rare earth-transition metal 2:17 permanent magnet alloys, state and trends. Goldschmidt Informiert 48: 3–9.

27.

Fidler, J. and P. Skalicky. (1982a). Coercivity of precipitation hardened cobalt rare earth 17:2 permanent magnets. J. Magn. Magn. Mat. 30: 58–70.CrossRef

28.

Fidler, J. and P. Skalicky (1982b, September). Domain wall pinning in REPM. In: Proc. 3rd Int. Symp. Magnetic Anisotropy and Coercivity in Rare Earth-Transition Metal Alloys, J. Fidler(ed.), Baden, Austria, pp. 585–597.

29.

Gavigan, J.P. and D. Givord. (1990). Intrinsic and extrinsic properties of rare earth-transition metal compounds and permanent magnets. J. Magn. Magn. Mat. 84: 288–298.CrossRef

30.

Givord, D., A. Lienard, P. Tenaud and T. Viadieu. (1987). Magnetic viscosity in Nd-Fe-B sintered magnets. J. Magn. Magn. Mat. 67: L281–L285.CrossRef

31.

Givord, D., P. Tenaud and T. Viadieu. (1988). Coercivity mechanisms in ferrites and rare earth transition metal sintered magnets(SmCo₅,Nd-Fe-B). IEEE Trans. Magn. 24: 1921–1923.CrossRef

32.

Givord, D., M. Rossignol and V.M.T.S. Barthem. (2003). The physics of coercivity. J. Magn. Magn. Mat. 258–259: 1–5.CrossRef

33.

Goll, D., I. Kleinschroth, W. Sigle and H. Kronmüller. (2000). Melt-spun precipitation-hardened Sm₂(Co,Cu,Fe,Zr)₁₇ magnets with abnormal temperature dependence of coercivity. Appl. Phys. Lett. 76: 1054–1056.CrossRef

34.

Goll, D. and H. Kronmüller. (2002). Micromagnetic analysis of pinning-hardened nanostructured, nanocrystalline Sm₂Co₁₇ based alloys. Scripta Mat. 47: 545–550.CrossRef

35.

Goll, D., H. Kronmüller and H.H. Stadelmaier. (2004). Micromagnetism and the microstructure of high-temperature permanent magnets. J. Appl. Phys. 96: 6534–6545.CrossRef

36.

Gopalan, R., K. Hono, A. Yan and O. Gutfleisch. (2009). Direct evidence on Cu-concentration variation and its correlation to coercivity in Sm(Co_0.74Fe_0.1Cu_0.12Zr_0.4)_7.4 ribbons, Scripta. Mat. 60: 764–767.

37.

Gutfleisch, O. and I.R. Harris. (1996). Fundamental and practical aspects of the hydrogenation, disproportionation, desorption and recombination process. J. Phys. D: Appl. Phys. 29: 2255–2265.CrossRef

38.

Gutfleisch, O., M. Kubis, A. Handstein, K.H. Müller and L. Schultz. (1998). Hydrogenation disproportionation desorption recombination in Sm–Co alloys by means of reactive milling. Appl. Phys. Lett. 73: 3001–3003.CrossRef

39.

Gutfleisch, O. (2000). Controlling the properties of high energy density permanent magnetic materials by different processing routes. J. Phys. D: Appl. Phys. 33: R157–R172.CrossRef

40.

Gutfleisch, O., N.M. Dempsey, A. Yan, K.-H. Müller and D. Givord. (2004). Coercivity analysis of melt-spun Sm₂(Co,Fe,Cu,Zr)_17. J . Magn. Magn. Mat. 272–276: 647–649.CrossRef

41.

Gutfleisch, O., K.-H. Müller, K. Khlopkov, M. Wolf, A. Yan, R. Schäfer, T. Gemming and L. Schultz. (2006). Evolution of magnetic domain structures and coercivity in high-performance SmCo 2:17 type permanent magnets. Acta Mat. 54: 997–1008.CrossRef

42.

Hadjipanayis, G.C. (1996). Microstructure and magnetic domains. In: Rare-Earth Iron Permanent Magnets, J.M.D. Coey (ed.), Oxford University Press, Oxford, UK, pp. 286–335.

43.

Hadjipanayis, G.C., W. Tang, Y. Zhang, S.T. Chui, J.F. Liu, C. Chen and H. Kronmüller. (2000). High temperature 2:17 magnets: relationship of magnetic properties to microstructure and processing. IEEE Trans. Magn. 36: 3382–3387.CrossRef

44.

Handstein, A., M. Kubis, O. Gutfleisch, B. Gebel and K.H. Müller. (1999). HDDR of Sm–Co alloys using high hydrogen pressures. J. Magn. Magn. Mat. 192: 73–76.CrossRef

45.

Handstein, A., A. Yan, G. Martinek, O. Gutfleisch, K.H. Müller and L. Schultz. (2003). Stability of magnetic properties of Sm₂Co₁₇-type magnets at operating temperatures larger than 400ºC. IEEE Trans. Magn. 39: 2923–2925.CrossRef

46.

Hofer, F. (1970). Physical metallurgy and magnetic measurements of SmCo₅-SmCu₅ alloys. IEEE Trans. Magn. 6: 221–224.CrossRef

47.

Hubert, A. and R. Schäfer (1998). Magnetic Domains – The Analysis of Magnetic Microstructures. Springer Verlag, Berlin, Germany.

48.

Kardelky, S., A. Gebert, O. Gutfleisch, A. Handstein, G. Martinek and L. Schultz. (2004). Corrosion behavior of Sm-Co based permanent magnets in oxidizing environments. IEEE Trans. Magn. 40: 2931–2933.CrossRef

49.

Katter, M., J. Weber, W. Assmus, P. Schrey and W. Rodewald. (1996). A new model for the coercivity mechanism of Sm₂(Co,Fe,Cu,Zr)₁₇ magnets. IEEE Trans. Magn. 32: 4815–4817.CrossRef

50.

Katter, M. (1998). Coercivity calculation of Sm₂(Co,Fe,Cu,Zr)₁₇ magnets. J. Appl. Phys. 83: 6721–6723.CrossRef

51.

Kerschl, P., A. Handstein, K. Khlopkov, O. Gutfleisch, D. Eckert, K. Nenkov, J.-C. Téllez-Blanco, R. Grössinger, K.-H. Müller and L. Schultz. (2005). High-field magnetisation of SmCo₅ ₋ _xCu_x (x ≈ 2.5) determined in pulse fields up to 48 T. J. Magn. Magn. Mat. 290–291(part 1): 420–423.

52.

Khan, Y. (1973). The crystal structures of R₂Co₁₇ intermetallic compounds. Acta Crystall. Section B 29: 2502–2507.CrossRef

53.

Khlopkov, K., O. Gutfleisch, D. Eckert, D. Hinz, B. Wall, W. Rodewald, K.-H. Müller, and L. Schultz. (2004). Local texture in Nd-Fe-B sintered magnets with maximised energy density. J. Alloys Comp. 365: 259–265.CrossRef

54.

Kronmüller, H., K.-D. Durst, W. Ervens and W. Fernengel. (1984). Micromagnetic analysis of precipitation hardened permanent magnets. IEEE Trans. Magn. 20: 1569–1571.CrossRef

55.

Kronmüller, H. and D. Goll. (2002). Micromagnetic theory of the pinning of domain walls at phase boundaries. Physica B 319: 122–126.CrossRef

56.

Kubis, M., A. Handstein, B. Gebel, O. Gutfleisch, K.H. Müller and L. Schultz. (1999). Highly coercive SmCo₅ magnets prepared by a modified hydrogenation-disproportionation-desorption-recombination process. J. Appl. Phys. 85: 5666–5668.CrossRef

57.

Kumar, K. (1988). RETM₅ and RE₂TM₁₇ permanent magnets development. J. Appl. Phys. 63: R13–R57.CrossRef

58.

Lectard, E., C.H. Allibert and R. Ballou. (1994). Saturation magnetization and anisotropy fields in the Sm(Co_1–xCu_x)₅ phases. J. Appl. Phys. 75: 6277–6279.CrossRef

59.

Lefèvre, A., L. Cataldo, M.Th. Cohen-Adad, and B.F. Mentzen. (1997). A representation of the Sm-Co-Zr-Cu-Fe quinary system: a tool for optimisation of 2/17 permanent magnets. J. Alloys Comp. 262–263: 129–133.CrossRef

60.

Li, D. and K.J. Strnat. (1984). Domain structures of two Sm-Co-Cu-Fe-Zr “2–17” magnets during magnetization reversal. J. Appl. Phys. 55: 2103–2105.CrossRef

61.

Liu, J.F., T. Chui, D. Dimitrov and G.C. Hadjipanayis. (1998a). Abnormal temperature dependence of intrinsic coercivity in Sm(Co, Fe, Cu, Zr)_z powder materials. Appl. Phys. Lett. 73: 3007–3009.CrossRef

62.

Liu, J.F., Y. Zhang, Y. Ding, D. Dimitrov, and G.C. Hadjipanayis (1998b). Rare earth permanent magnets for high temperature applications. In: Proc. of 15th Int. Workshop on Rare Earth Magnets and their Appl., Dresden, Germany, vol. 2, pp. 607–622.

63.

Liu, J.F., Y. Zhang, D. Dimitrov and G.C. Hadjipanayis. (1999). Microstructure and high temperature magnetic properties of Sm(Co,Cu,Fe,Zr)_z (z = 6.7–9.1) permanent magnets. J. Appl. Phys. 85: 2800–2804.CrossRef

64.

Livingston, J.D. and M.D. McConnell. (1972). Domain-wall energy in cobalt-rare-earth compounds. J. Appl. Phys. 43: 4756–4762.CrossRef

65.

Livingston, J.D. (1975). Domains in sintered Co-Cu-Fe-Sm magnets. J. Appl. Phys. 46: 5259–5262.CrossRef

66.

Livingston, J.D. and D.L. Martin. (1977). Microstructure of aged (Co,Cu,Fe)₇Sm magnets. J. Appl. Phys. 48: 1350–1354.CrossRef

67.

Matthias, T., G. Zehetner, J. Fidler, W. Scholz, T. Schrefl, D. Schobinger and G. Martinek. (2002). TEM-analysis of Sm(Co,Fe,Cu,Zr)_z magnets for high-temperature applications. J. Magn. Magn. Mat. 242–245: 1353–1355.CrossRef

68.

Maury, C., L. Rabenberg and C.H. Allibert. (1993). Genesis of the cell microstructure in the Sm(Co,Fe,Cu,Zr) permanent magnets with 2:17 type. Phys. Stat. Sol. (a) 140: 57–72.CrossRef

69.

Meyer-Liautaud, F., S. Derkaoui, C.H. Allibert and R. Castanet. (1987). Structural and thermodynamic data on the pseudobinary phases R(Co₁ ₋ _xCu_x)₅ with R ≡ Sm, Y, Ce. J. Less-Common Met. 127: 231–242.CrossRef

70.

Morita, Y., T. Umeda and Y. Kimura. (1987). Phase transformation at high temperature and coercivity of Sm(Co,Cu,Fe,Zr)_7-9 magnet alloys. IEEE Trans. Magn. 23: 2702–2704.CrossRef

71.

Nagel, H. (1979). Coercivity and microstructure of Sm(Co_0.87Cu_0.13)_7.8. J. Appl. Phys. 50: 1026–1030.CrossRef

72.

Nesbitt, E.A., R.H. Willens, R.C. Sherwood and E. Bühler. (1968). New permanent magnet materials. Appl. Phys. Lett. 12: 361–362.CrossRef

73.

Oesterreicher, H., F.T. Parker and M. Misroch. (1979). Giant intrinsic magnetic hardness in SmCo_5-xCu_x. J. Appl. Phys. 50: 4273–4278.CrossRef

74.

Ojima, T., S. Tomizawa, T. Yoneyama and T. Hori. (1977). Magnetic properties of new type of rare-earth cobalt magnets. IEEE Trans. Magn. 13: 1317–1319.CrossRef

75.

Panagiotopoulos, I., M. Gjoka and D. Niarchos. (2002). Temperature dependence of the activation volume in high-temperature Sm(Co,Fe,Cu,Zr)_Z magnets. J. Appl. Phys. 92: 7693–7695.CrossRef

76.

Perkins, R.S., S. Gaiffi and A. Menth. (1975). Permanent magnet properties of Sm₂(Co,Fe)₁₇. IEEE Trans. Magn. 11: 1431–1433CrossRef

77.

Perkins, R.S. and S. Strässler. (1977). Interpretation of the magnetic properties of pseudobinary Sm₂(Co,M)₁₇ compounds. I. Magnetocrystalline anisotropy. Phys. Rev. B 15: 477–489; Interpretation of the magnetic properties of pseudobinary Sm₂(Co,M)₁₇ compounds. II. Magnetization. Phys. Rev. B 15: 490–495.CrossRef

78.

Perry, A.J. and A. Menth. (1975). Permanent magnets based on Sm(Co,Cu,Fe)_z. IEEE Trans. Magn. 11: 1423–1425.CrossRef

79.

Perry, A.J. (1977). The constitution of copper-hardened samarium-cobalt permanent magnets. J. Less-Common Met. 51: 153–162.CrossRef

80.

Popov, A.G., A.V. Korolev and N.N. Shchegoleva. (1990). Temperature dependence of the coercive force of Sm(Co,Fe,Cu,Zr)_7.3 alloys. Phys. Met. Metall. 69: 100–106.

81.

Rabenberg, L., R.K. Mishra, and G. Thomas. (1982a). Microstructure of precipitation hardened SmCo permanent magnets. J. Appl. Phys. 53: 2389–2391.CrossRef

82.

Rabenberg, L., R.K. Mishra, and G. Thomas. (1982b, September). Development of the cellular microstructure in the SmCo_7.4-type magnets. In: Proc. 3rd Int. Symp. Magnetic Anisotropy and Coercivity in Rare Earth-Transition Metal Alloys, J. Fidler (ed.), Baden, Austria, pp. 599–608.

83.

Ray, A.E. (1984). Metallurgical behavior of Sm(Co,Fe,Cu,Zr)_z alloys. J. Appl. Phys. 55: 2094–2096.CrossRef

84.

Ray, A.E. and S. Liu. (1992). Recent progress in 2:17 type permanent magnets. Proc. 12th Int. Workshop on RE Magnets and their Appl., Canberra, Australia, pp. 552–573.

85.

Schobinger, D., O. Gutfleisch, D. Hinz, K.H. Müller, L. Schultz and G. Martinek. (2002). High temperature magnetic properties of 2:17 Sm–Co magnets. J. Magn. Magn. Mat. 242–245: 1347–1349.CrossRef

86.

Schultz, L., K. Schnitzke, J. Wecker, M. Katter and C. Kuhrt. (1991). Permanent magnets by mechanical alloying. J. Appl. Phys. 70: 6339–6344.CrossRef

87.

Skomski, R. (1997). Domain-wall curvature and coercivity in pinning type Sm-Co magnets. J. Appl. Phys. 81: 6527–5629.

88.

Skomski, R. and J.M.D. Coey. (1999). Permanent Magnetism. Institute of Physics, Bristol.

89.

Skomski, R., A. Kashyap, Y. Qiang, and D.J. Sellmyer. (2003). Exchange through nonmagnetic insulating matrix. J. Appl. Phys. 93: 6477–6479.CrossRef

90.

Stadelmaier, H.H., E.-Th. Henig, G. Schneider and G. Petzow. (1988). The metallurgy of permanent magnets based on Co₁₇Sm₂. Z. Metallkd. 79: 313–316.

91.

Stadelmaier, H.H., B. Reinsch, and G. Petzow. (1998). Samarium-cobalt phase equilibria revisited; relevance to permanent magnets. Z. Metallkd. 89: 114–118.

92.

Stadelmaier, H.H., D. Goll, H. Kronmüller. (2005). Permanent magnet alloys based on Sm₂Co₁₇; phase evolution in the quinary system Sm-Zr-Fe-Co-Cu. Z. Metallkd. 96: 17–23.

93.

Streibl, B., J. Fidler and T. Schrefl. (2000). Domain wall pinning in high temperature Sm(Co,Fe,Cu,Zr)_7-8 magnets. J. Appl. Phys. 87: 4765–4767.CrossRef

94.

Strnat, K.J., G. Hoffer, J. Olson, W. Ostertag and J.J. Becker. (1967). A family of new cobalt-base permanent magnetic materials. J. Appl. Phys. 38: 1001–1002.CrossRef

95.

Strnat, K.J. (1988). Chapter 2, Rare earth–cobalt permanent magnets. In: Ferromagnetic Materials, vol. 4, E.P. Wohlfarth, K.H.J. Buschow (eds.), North-Holland, Amsterdam, Netherlands.

96.

Strnat, K.J. and R.M.W. Strnat. (1991). Rare earth–cobalt permanent magnets. J. Magn. Magn. Mat. 100: 38–56.CrossRef

97.

Tang, H., Y. Liu and D.J. Sellmyer. (2002). Nanocrystalline Sm_12.5(Co,Zr)_87.5 magnets: synthesis and magnetic properties. J. Magn. Magn. Mat. 241: 345–356.CrossRef

98.

Tang, W., Y. Zhang and G.C. Hadjipanayis. (2000). Effect of Zr on the microstructure and magnetic properties of Sm(Co_balFe_0.1Cu_0.088Zr_x)_8.5 magnets. J. Appl. Phys. 87: 399–403.CrossRef

99.

Tang, W., A.M. Gabbay, Y. Zhang, G.C. Hadjipanayis and H. Kronmüller. (2001). Temperature dependence of coercivity and magnetisation reversal in Sm(Co_balFe_0.1Cu_yZr_0.4)_7.0 magnets. IEEE Trans. Magn. 37: 2515–2517.CrossRef

100.

Walmer, M.S., C.H. Chen and M.H. Walmer. (2000). A new class of Sm-TM magnets for operating temperatures up to 550°C. IEEE Trans. Magn. 36: 3376–3381.CrossRef

101.

Wecker, J., M. Katter and L. Schultz. (1991). Mechanically alloyed Sm-Co materials. J. Appl. Phys. 69: 6058–6060.CrossRef

102.

Xiong, X.Y., T. Ohkubo, T. Koyama, K. Ohashi, T. Tawara and K. Hono. (2004). The microstructure of sintered Sm(Co_0.72Fe_0.20Cu_0.055Zr_0.025)_7.5 permanent magnet studied by atom probe. Acta Mat. 52: 737–748.CrossRef

103.

Yan, A., W.-Y. Zhang, H.-W. Zhang and B. Shen. (2000). Melt-spun magnetically anisotropic SmCo₅ ribbons with high permanent performance. J. Magn. Magn. Mat. 210: 10–14.CrossRef

104.

Yan, A., A. Bollero, O. Gutfleisch and K.H. Müller. (2002a). Microstructure and magnetization reversal in nanocomposite SmCo₅/Sm₂Co₁₇ magnets. J. Appl. Phys. 91: 2192–2196.CrossRef

105.

Yan, A., A. Bollero, K.-H. Müller and O. Gutfleisch. (2002b). Fast development of high coercivity in melt-spun Sm(Co,Fe,Cu,Zr)_z magnets. Appl. Phys. Lett. 80: 1243–1245,CrossRef

106.

Yan, A., A. Bollero, K.H. Müller and O. Gutfleisch. (2002c). Influence of Fe, Zr and Cu on microstructure and crystallographic texture of melt-spun 2:17 SmCo ribbons. J. Appl. Phys. 91: 8825–8827.CrossRef

107.

Yan, A., K.H. Müller and O. Gutfleisch. (2002d). Highly coercive melt-spun Sm(Co, Fe, Cu, Zr)_z magnets prepared by simple processing. IEEE Trans. Magn. 38: 2937–2939.CrossRef

108.

Yan, A., O. Gutfleisch, T. Gemming and K.-H. Müller. (2003a). Microchemistry and reversal mechanism in 2:17-type Sm-Co magnets. Appl. Phys. Lett. 83: 2208–2210.CrossRef

109.

Yan, A., O. Gutfleisch, A. Handstein, T. Gemming and K.-H. Müller. (2003b). Microstructure, microchemistry, and magnetic properties of melt-spun Sm(Co,Fe,Cu,Zr)_y magnets. J. Appl. Phys. 93: 7975–7977.CrossRef

110.

Yan, A., A. Bollero, O. Gutfleisch, K.-H. Müller, L. Schultz, (2004). Melt-spun precipitation hardened Sm(Co,Fe,Cu,Zr)_z magnets, Mat. Sci. Eng. A375–377: 1169–1172.

111.

Yang, W., W. Ping, S. Zhenhua and Z. Shouzeng. (1992). 2:17 type temperature compensated magnets with high coercivity. In: Proc. of the 12th Int. Workshop on RE Magnets and their Appl., Canberra, Australia, pp. 249–257.

112.

Zhang, Y., W. Tang. G.C. Hadjipanayis, C. Chen, C. Nelson and K. Krishnan. (2000). Evolution of microstructure, microchemistry and coercivity in 2:17 type Sm–Co magnets with heat treatment. IEEE Trans. Magn. 37: 2525–2527.CrossRef

113.

Zhou, J., I.A. Al-Omari, J P. Liu and D.J. Sellmyer. (2000). Structure and magnetic properties of SmCo_7-xTi_x with TbCu₇-type structure. J. Appl. Phys. 87: 5299–5301.CrossRef

114.

Zhou, J., R. Skomski, and D.J. Sellmyer. (2003). Magnetic hysteresis of mechanically alloyed Sm–Co nanocrystalline powders. J. Appl. Phys. 93: 6495–6497.CrossRef

Titel: High-Temperature Samarium Cobalt Permanent Magnets
verfasst von: Oliver Gutfleisch
Verlag: Springer US
Buch: Nanoscale Magnetic Materials and Applications
Print ISBN: 978-0-387-85598-1

Electronic ISBN: 978-0-387-85600-1

Copyright-Jahr: 2009
DOI: https://doi.org/10.1007/978-0-387-85600-1_12

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht