nach oben

European Journal of Wood and Wood Products

Erschienen in:

30.07.2022 | Original Article

Highly efficient preparation of bamboo scrimber: drying process optimization of bamboo bundles and its effect on the properties of bamboo scrimber

verfasst von: Ershan Liang, Chuanfu Chen, Dengyun Tu, Qiaofang Zhou, Jiahua Zhou, Chuanshuang Hu, Xingwei Li, Hongxia Ma

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Exploring an adequate drying process with a high drying rate and low drying energy consumption for bamboo bundles can help promote the large-scale production of bamboo scrimber. For this purpose, the drying process of bamboo bundles before resin impregnation and its impact on the physical and mechanical properties of the bamboo scrimber were investigated in this study. The results showed that the energy consumed in the two-step drying treatment of bamboo bundles was reduced by 33%, 30%, 13%, 23%, and 29%, respectively, compared with that consumed in the constant temperature drying treatment at 60, 70, 80, 90, and 100 °C. Regardless of the drying process applied in this work, the dimensional stability, bending strength and modulus of elasticity, and chemical composition of the bamboo scrimber fabricated from the dried bamboo bundles did not change significantly. Thus, the two-step drying process presented in this study holds significant potential for producing bamboo scrimber in a highly efficient and energy-saving way.

Vorheriger Artikel Bond strength prediction of timber-FRP under standard and acidic/alkaline environmental conditions based on gene expression programming

Nächster Artikel Drying characteristics, hygroscopicity, and dimensional stability of natural tung oil dried bamboo

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Banik N (2020) Manufacturing of bamboo composite in the industrial aspect. Mater Today Proc 26(2):2875–2887. https://doi.org/10.1016/j.matpr.2020.02.596CrossRef

Chen F, Jiang Z, Deng J (2014) Evaluation of the uniformity of density and mechanical properties of bamboo-bundle laminated veneer lumber (BLVL). BioResources 9(1):554–565. https://doi.org/10.15376/biores.9.1.554-565CrossRef

Chen JP, Guagliano M, Shi MH, Jiang XS (2021) A comprehensive overview of bamboo scrimber and its new development in China. Eur J Wood Prod 79(2):363–379. https://doi.org/10.1007/s00107-020-01622-wCrossRef

Dan-asabe B, Yaro SA, Yawas DS, Aku SY (2019) Statistical modeling and optimization of the flexural strength, water absorption and density of a doum palm-Kankara clay filler hybrid composite. J King Saud Univ Sci 31(4):385–394. https://doi.org/10.1016/j.jksues.2017.11.003CrossRef

Dent RW (1977) A multilayer theory for gas sorption, part I: sorption of a single gas. Text Res J 47(2):145–152. https://doi.org/10.1177/004051757704700213CrossRef

Dixon PG, Semple KE, Kutnar A, Kamke FA (2016) Comparison of the flexural behavior of natural and thermo-hydro-mechanically densified Moso bamboo. Eur J Wood Prod 74:633–642. https://doi.org/10.1007/s00107-016-1047-9CrossRef

Dresch AB, Venturini J, Bergmann CP (2021) Improving the flexural-strength-to-density ratio in alumina ceramics with the addition of silicon nitride. Ceram Int 47(3):3964–3971. https://doi.org/10.1016/J.CERAMINT.2020.09.260CrossRef

Fang J, Zhang WF, Weng FJ (2016) Interpretation of Zhejiang Province local standard: quota and calculation method of energy consumption per unit products for bamboo scrimber flooring. China Wood-Based Panels 5:23–26

Flávia MSB, Juarez BP (2018) Physico-mechanical characterization of heat-treated glued laminated bamboo. Construct Build Mater 190:719–727. https://doi.org/10.1016/j.conbuildmat.2018.09.057CrossRef

Fu Y, Fang H, Dai FY (2016) Study on the properties of the recombinant bamboo by finite element method. Compos Part B Eng 115:1–9. https://doi.org/10.1016/j.compositesb.2016.10.022CrossRef

Guo X, Liu L, Hu YC, Wu YQ (2018a) Water vapor sorption properties of TEMPO oxidized and sulfuric acid treated cellulose nanocrystal films. Carbohyd Polym 197:524–530. https://doi.org/10.1016/j.carbpol.2018.06.027CrossRef

Guo X, Wu YQ, Yan N (2018b) In situ micro-FTIR observation of molecular association of adsorbed water with heat-treated wood. Wood Sci Technol 52(4):971–985. https://doi.org/10.1007/s00226-018-1020-3CrossRef

Li X, Ashraf M, Li H, Zheng XY (2019) An experimental investigation on Parallel Bamboo Strand Lumber specimens under quasi static and impact loading. Construct Build Mater 228:116724. https://doi.org/10.1016/j.conbuildmat.2019.116724CrossRef

Liu LQ, Zhang WF, Fang J (2015) Investigation of energy consumption and analysis of energy-saving on bamboo scrimber flooring. World Bamboo Rattan 13(4):20–23

Lv HF, Chen XF, Liu XM, Fang CH (2018) The vacuum-assisted microwave drying of round bamboos: drying kinetics, color and mechanical property. Mater Lett 223:159–162. https://doi.org/10.1016/j.matlet.2018.04.038CrossRef

Matsumoto K, Nakai Y, Oguchhi T, Oguchi T (1998) Effect of pore size on the gaseous adsorption of ethenzamide on porous crystalline cellulose and the physico-chemical stability of ethenzamide after storage. Chem Pharm Bull 46(2):314–318. https://doi.org/10.1248/cpb.46.314CrossRef

Meng FD, Liu R, Zhang YH, Huang YX, Yu YL, Yu WJ (2017) Improvement of the water repellency, dimensional stability, and biological resistance of bamboo-based fiber reinforced composites. Polym Compos 40(2):506–513. https://doi.org/10.1002/pc.24677CrossRef

Nguyen DM, Almeida G, Zhang J, Lu P (2021) A critical review of current imaging techniques to investigate water transfers in wood and biosourced materials. Transport Porous Med 137:21–61. https://doi.org/10.1007/S11242-020-01538-2CrossRef

Ni HJ, Su WH, Fan SH, Chu HY (2021) Effects of intensive management practices on rhizosphere soil properties, root growth, and nutrient uptake in Moso bamboo plantations in subtropical China. Forest Ecol Manag 493:119083. https://doi.org/10.1016/J.FORECO.2021.119083CrossRef

Pineda H, Hu YA, Semple K, Chen ML (2021) Computer simulation of the mat formaton of bamboo scrimber composites. Compos Part A Appl S 149:106542. https://doi.org/10.1016/j.compositesa.2021.106542CrossRef

Qin L, Yu WJ (2009) Research on surface color, properties of thermo-treated reconstituted bamboo lumber after artificial weathering test. Adv Mat Res 865:1395–1398. https://doi.org/10.4028/www.scientific.net/AMR.79-82.1395CrossRef

Shao SL, Wen GF, Jin ZF (2008) Changes in chemical characteristics of bamboo (Phyllostachys pubescens) components during steam explosion. Wood Sci Technol 42(6):439–451. https://doi.org/10.1007/s00226-008-0183-8CrossRef

Sharma B, Gatóo A, Bock M, Ramage M (2015) Engineered bamboo for structural applications. Construct Build Mater 81:66–73. https://doi.org/10.1016/j.conbuildmat.2015.01.077CrossRef

Shen Y (2019) Simulation analysis and experimental study on mechanical properties of plywood and solid wood materials. Dissertation, Hunan University of Technology

Shi PJ, Haiganoush KP, Brady KQ, Zhao J (2020) Precipitation is the most crucial factor determining the distribution of moso bamboo in Mainland China. Global Ecol Conserv 22:e00924. https://doi.org/10.1016/j.gecco.2020.e00924CrossRef

Tjeerdsma BF, Militz H (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz Roh- Werkst 63(2):102–111. https://doi.org/10.1007/s00107-004-0532-8CrossRef

Venkatesha BK, Saravanan R, Anand Babu K (2021) Effect of moisture absorption on woven bamboo/grass fiber reinforced epoxy hybrid composites. Mater Today Proc 45(1):216–221. https://doi.org/10.1016/j.matpr.2020.10.421CrossRef

Vetter RE, Sá Ribeiro RA, Sá Ribeiro MG, Miranda IPA (2015) Studies on drying of imperial bamboo. Eur J Wood Prod 73(3):411–414. https://doi.org/10.1007/s00107-015-0900-6CrossRef

Vogtländer J, Van der Lugt P, Brezet H (2010) The sustainability of bamboo products for local and Western European applications. Lcas and land-use. J Cleaner Prod 18(13):1260–1269. https://doi.org/10.1016/j.jclepro.2010.04.015CrossRef

Wang HK, Yu Y, Tian GL (2012) Hygroscopic behavior of bamboo and its blocking units. J Nanjing for Univ (nat Sci Edn) 36(2):11–14

Wei Y, Ji XW, Duan MJ, Li GF (2017) Flexural performance of bamboo scrimber beams strengthened with fiber-reinforced polymer. Construct Build Mater 142:66–82. https://doi.org/10.1016/j.conbuildmat.2017.03.054CrossRef

Wei Y, Tang SF, Ji XW, Zhao K (2020) Stress-strain behavior and model of bamboo scrimber under cyclic axial compression. Eng Struct 209:110279. https://doi.org/10.1016/j.engstruct.2020.110279CrossRef

Weng WZ (2005) Development of application range of timber drying. Prod Appl 32(5):37–39

Xia CL, Wu YJ, Qiu Y, Cai LP (2019) Processing high-performance woody materials by means of vacuum-assisted resin infusion technology. J Clean Prod 241:118340. https://doi.org/10.1016/j.jclepro.2019.118340CrossRef

Xie YJ, Hill CAS, Jalaludin ZH, Sun DY (2011) The water vapour sorption behavior of three celluloses: analysis using parallel exponential kinetics and interpretation using the Kelvin-Voigt viscoelastic model. Cellulose 18(3):517–530. https://doi.org/10.1007/s10570-011-9512-4CrossRef

Xu M, Cui ZY, Tu LH, Xia QL (2019) The effect of elevated temperatures on the mechanical properties of laminated bamboo. Construct Build Mater 226:32–43. https://doi.org/10.1016/j.conbuildmat.2019.07.274CrossRef

Yang TC, Lee TY (2018) Effects of density and heat treatment on the physico-mechanical properties of unidirectional round bamboo stick boards (UBSBs) made of Makino bamboo (Phyllostachys makinoi). Construct Build Mater 187:406–413. https://doi.org/10.1016/j.conbuildmat.2018.07.182CrossRef

Yong C (2013) Characterization on moso bamboo bonding interface on microscale. Dissertation, Nanjing Forestry University

Yu WJ (2019) Current situation and opportunities for the development of bamboo scrimber industry in China. World Bamboo Rattan 17(3):1–4

Yu YL, Jiang ZH (2005) Bonding properties of bamboo surface. J Bamboo Res 25(1):30–36

Yu Y, Fei B, Zhang B, Yu X (2007) Cell-wall mechanical properties of bamboo investigated by in-situ imaging nanoindentation. Wood Fiber Sci 39(4):527–535. https://doi.org/10.1007/s11295-007-0082-4CrossRef

Yu Y, Jiang ZH, Fei BH, Wang G (2011) An improved microtensile technique for mechanical characterization of short plant fibers: a case study on bamboo fibers. J Mater Sci 46(3):739–746. https://doi.org/10.1007/s10853-010-4806-8CrossRef

Yu YL, Zhang YM, Yu WJ, Fei BH (2012) Comparison of the suitability of CI bamboo and MOSO bamboo for manufacturing bamboo-based fiber composites. In: Proceedings of 2012 international conference on biobase mater science and engineering, pp 69–74. https://doi.org/10.1109/BMSE.2012.6466183

Yu Y, Zhu RX, Wu BL, Hu YA, Yu WJ (2015) Fabrication, material properties, and application of bamboo scrimber. Wood Sci Technol 49:83–98. https://doi.org/10.1007/s00226-014-0683-7CrossRef

Yue K, Wu JH, Xu LQ, Tang ZQ (2020) Use impregnation and densification to improve mechanical properties and combustion performance of Chinese fir. Construct Build Mater 241:118101. https://doi.org/10.1016/j.conbuildmat.2020.118101CrossRef

Yuen JQ, Fung T, Ziegler AD (2017) Carbon stocks in bamboo ecosystems worldwide: Estimates and uncertainties. Forest Ecol Manag 393:113–138. https://doi.org/10.1016/j.foreco.2017.01.017CrossRef

Zhang XX, Li J, Wang HK (2018) Investigating the water vapor sorption behavior of bamboo with two sorption models. J Mater Sci 53(11):8241–8249. https://doi.org/10.1007/s10853-018-2166-yCrossRef

Zhao KP, Wei Y, Chen S, Huang C (2021) Experimental investigation of the long-term bahavior of reconstituted bamboo beams with various loading levels. J Build Eng 36:102107. https://doi.org/10.1016/j.jobe.2020.102107CrossRef

Titel: Highly efficient preparation of bamboo scrimber: drying process optimization of bamboo bundles and its effect on the properties of bamboo scrimber
verfasst von: Ershan Liang
Chuanfu Chen
Dengyun Tu
Qiaofang Zhou
Jiahua Zhou
Chuanshuang Hu
Xingwei Li
Hongxia Ma
Publikationsdatum: 30.07.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 6/2022
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-022-01821-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2022

Thermal treatment of OSB panels: a systematic and bibliometric overview

Bond strength prediction of timber-FRP under standard and acidic/alkaline environmental conditions based on gene expression programming

Macroscopic X-ray computed tomography aided numerical modelling of moisture flow in sawn timber

Flame-retardant, heat-insulating and char formation properties of densified Pinus sylvestris treated with different compression pressures

Effects of cyclic drying and moistening on the mechanical and physical properties of wood

Acoustic tomography outputs in comparison to the properties of degraded wood in beech trees