Skip to main content
Erschienen in: Journal of Materials Science 13/2009

01.07.2009

Hydrogen, porosity and oxide film defects in liquid Al

verfasst von: W. D. Griffiths, R. Raiszadeh

Erschienen in: Journal of Materials Science | Ausgabe 13/2009

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This article reports results from an experiment where a bubble of air was held at a constant temperature in a liquid Al melt, with the volume of the bubble monitored continuously using real-time X-ray equipment. When the H content of the surrounding melt was low, the volume of the trapped air bubble reduced with time, as the O and N in the bubble atmosphere reacted with the Al to form Al2O3 and AlN. When the H content of the melt was increased to about 0.3 ml 100 g−1 Al, the H in solution passed into the air bubble causing its expansion. In an Al casting the same effect would cause an entrained double oxide film defect to act as a site for the growth of H-driven gas porosity. The way in which the oxide film defects might behave in forming H porosity has been discussed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Traenkner FO (1982) Mod Casting 70:36 Traenkner FO (1982) Mod Casting 70:36
3.
Zurück zum Zitat Griffin JA, Church J, Weiss D (2003) AFS Trans 111:289 Griffin JA, Church J, Weiss D (2003) AFS Trans 111:289
6.
Zurück zum Zitat Smithells CJ, Ransley CE (1935) Proc R Soc A A152:706 Smithells CJ, Ransley CE (1935) Proc R Soc A A152:706
7.
8.
Zurück zum Zitat Ransley CE, Neufeld H (1948) J Inst Met 74:599 Ransley CE, Neufeld H (1948) J Inst Met 74:599
10.
Zurück zum Zitat Campbell J (1991) Castings. Butterworth-Heinemann, London Campbell J (1991) Castings. Butterworth-Heinemann, London
11.
13.
Zurück zum Zitat Tynelius K, Major F, Apelian D (1993) AFS Trans 101:401 Tynelius K, Major F, Apelian D (1993) AFS Trans 101:401
15.
Zurück zum Zitat Felicelli SD, Escobar de Obaldia E, Pita CM (2007) AFS Trans 115, paper no. 078 Felicelli SD, Escobar de Obaldia E, Pita CM (2007) AFS Trans 115, paper no. 078
16.
Zurück zum Zitat Raiszadeh R (2005) PhD thesis, University of Birmingham, Birmingham, UK Raiszadeh R (2005) PhD thesis, University of Birmingham, Birmingham, UK
17.
18.
Zurück zum Zitat Zou J, Shivkumar S, Apelian D (1990) AFS Trans 178:871 Zou J, Shivkumar S, Apelian D (1990) AFS Trans 178:871
19.
Zurück zum Zitat Impey S, Stephenson D, Nicholls JR (1990) In: Proc. conf. on the microscopy of oxidation, Cambridge, United Kingdom, 26–28 March 1990, Institute of Metals, London, p 238 Impey S, Stephenson D, Nicholls JR (1990) In: Proc. conf. on the microscopy of oxidation, Cambridge, United Kingdom, 26–28 March 1990, Institute of Metals, London, p 238
Metadaten
Titel
Hydrogen, porosity and oxide film defects in liquid Al
verfasst von
W. D. Griffiths
R. Raiszadeh
Publikationsdatum
01.07.2009
Verlag
Springer US
Erschienen in
Journal of Materials Science / Ausgabe 13/2009
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI
https://doi.org/10.1007/s10853-009-3450-7

Weitere Artikel der Ausgabe 13/2009

Journal of Materials Science 13/2009 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.