nach oben

Structural and Multidisciplinary Optimization

Erschienen in:

21.07.2020 | Research Paper

Identification problem of acoustic media in the frequency domain based on the topology optimization method

verfasst von: Juliano F. Gonçalves, João B. D. Moreira, Ruben A. Salas, Mohammad M. Ghorbani, Wilfredo M. Rubio, Emílio C. N. Silva

Erschienen in: Structural and Multidisciplinary Optimization | Ausgabe 3/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the identification problem of acoustic parameters in the frequency domain is examined by means of a topology optimization (TO) approach. Data measured by acoustic receivers are collected from synthetic models and used as a reference in the optimization problem which aims at estimating the acoustic media properties that minimize a least-squares cost functional. A two-step optimization procedure is proposed to deal with multi-phase acoustic media problems by using linear and peak function material interpolation schemes. The idea is to use features from the multi-material topology optimization to reconstruct acoustic models with an increased level of sharpness. From the first step with linear interpolation, phase candidates are defined by a curve fitting process considering the summation of Gaussian curves and, therefore, this solution is used to create the peak material model for the second step. Thus, a multi-material model that is usually applied to design problems with predefined material candidates can be also used to solve this identification problem without prior knowledge of the exact properties of the model to be reconstructed. The optimization problem is solved by using a BFGS algorithm while the Levenberg-Marquardt Algorithm (LMA) is used to solve the least-squares curve-fitting problem. The proposed approach is analyzed through 2D numerical examples.

Vorheriger Artikel An efficient algorithm for time-dependent failure credibility by combining adaptive single-loop Kriging model with fuzzy simulation

Nächster Artikel Efficient hybrid topology and shape optimization combining implicit and explicit design representations

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Allaire G, Kohn RV (1993) Topology optimization and optimal shape design using homogenization. Springer, Netherlands, pp 207–218

Allaire G, Michailidis G (2018) Modal basis approaches in shape and topology optimization of frequency response problems. Int J Numer Methods Eng 113(8):1258–1299. https://doi.org/10.1002/nme.5504MathSciNetCrossRef

Alnæs MS, Logg A, Mardal KA, Skavhaug O, Langtangen HP (2009) Unified framework for finite element assembly. Int J Comput Sci Eng 4(4):231–244. https://doi.org/10.1504/IJCSE.2009.029160CrossRef

Alnæs MS, Blechta J, Hake J, Johansson A, Kehlet B, Logg A, Richardson C, Ring J, Rognes ME, Wells GN (2015) The fenics project version 1.5. Arch Numer Softw 3:100. https://doi.org/10.11588/ans.2015.100.20553CrossRef

Anghileri M, Chirwa E, Lanzi L, Mentuccia F (2005) An inverse approach to identify the constitutive model parameters for crashworthiness modelling of composite structures. Compos Struct 68(1):65–74. https://doi.org/10.1016/j.compstruct.2004.03.001CrossRef

Atchonouglo K, Banna M, Vallée C, Dupré JC (2008) Inverse transient heat conduction problems and identification of thermal parameters. Heat Mass Transf 45(1):23–29. https://doi.org/10.1007/s00231-008-0383-7CrossRef

Awan FG, Saleem O, Kiran A (2019) Recent trends and advances in solving the inverse problem for eeg source localization. Inverse Probl Sci Eng 27(11):1521–1536. https://doi.org/10.1080/17415977.2018.1490279MathSciNetCrossRef

Baumeister J, Leitão A (2005) Topics in inverse problems. IMPA Mathematical Publications, Rio de Janeiro

Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1 (4):193–202. https://doi.org/10.1007/BF01650949CrossRef

Berenger JP (1994) A perfectly matched layer for the absorption of electromagnetic waves. J Comput Phys 114(2):185–200. https://doi.org/10.1006/jcph.1994.1159MathSciNetCrossRefMATH

Byrd R, Lu P, Nocedal J, Zhu C (1995) A limited memory algorithm for bound constrained optimization. SIAM J Sci Comput 16(5):1190–1208. https://doi.org/10.1137/0916069MathSciNetCrossRefMATH

Chitturi V, Farrukh N (2019) Spatial resolution in electrical impedance tomography: a topical review. J Electr Bioimped 8(1):66–78. https://doi.org/10.5617/jeb.3350CrossRef

Choi CK, Yoo HH (2016) Stochastic inverse method to identify parameter random fields in a structure. Struct Multidiscip Optim 54(6):1557–1571. https://doi.org/10.1007/s00158-016-1534-yMathSciNetCrossRef

Christiansen RE, Lazarov BS, Jensen JS, Sigmund O (2015) Creating geometrically robust designs for highly sensitive problems using topology optimization. Struct Multidiscip Optim 52(4):737–754. https://doi.org/10.1007/s00158-015-1265-5MathSciNetCrossRef

Colton D, Kress R (2019) Inverse acoustic and electromagnetic scattering theory, vol 93. Springer Nature

Dahl J, Jensen JS, Sigmund O (2008) Topology optimization for transient wave propagation problems in one dimension. Struct Multidiscip Optim 36(6):585–595. https://doi.org/10.1007/s00158-007-0192-5MathSciNetCrossRefMATH

Davis TA (2004) A column pre-ordering strategy for the unsymmetric-pattern multifrontal method. ACM Trans Math Softw (TOMS) 30(2):165–195. https://doi.org/10.1145/992200.992205MathSciNetCrossRefMATH

Deng L, O’Reilly MA, Jones RM, An R, Hynynen K (2016) A multi-frequency sparse hemispherical ultrasound phased array for microbubble-mediated transcranial therapy and simultaneous cavitation mapping. Phys Med Biol 61(24):8476. https://doi.org/10.1088/0031-9155/61/24/8476CrossRef

Desai J, Faure A, Michailidis G, Parry G, Estevez R (2018) Topology optimization in acoustics and elasto-acoustics via a level-set method. J Sound Vib 420:73–103. https://doi.org/10.1016/j.jsv.2018.01.032CrossRef

de Lima CR, Mello LA, Lima RG, Silva EC (2007) Electrical impedance tomography through constrained sequential linear programming: a topology optimization approach. Meas Sci Technol 18 (9):2847. https://doi.org/10.1088/0957-0233/18/9/014CrossRef

Dühring MB, Jensen JS, Sigmund O (2008) Acoustic design by topology optimization. J Sound Vibr 317(3-5):557–575. https://doi.org/10.1016/j.jsv.2008.03.042CrossRef

Farrell PE, Ham DA, Funke SW, Rognes ME (2013) Automated derivation of the adjoint of high-level transient finite element programs. SIAM J Sci Comput 35(4):C369–C393. https://doi.org/10.1137/120873558MathSciNetCrossRefMATH

Gholamy A, Kreinovich V (2014) Why ricker wavelets are successful in processing seismic data: towards a theoretical explanation. In: 2014 IEEE symposium on computational intelligence for engineering solutions (CIES). IEEE, pp 11–16

Goo S, Wang S, Kook J, Koo K, Hyun J (2017) Topology optimization of bounded acoustic problems using the hybrid finite element-wave based method. Comput Methods Appl Mech Eng 313:834–856. https://doi.org/10.1016/j.cma.2016.10.027MathSciNetCrossRefMATH

Grech R, Cassar T, Muscat J, Camilleri KP, Fabri SG, Zervakis M, Xanthopoulos P, Sakkalis V, Vanrumste B (2008) Review on solving the inverse problem in eeg source analysis. J Neuroeng Rehabs 5(1):25. https://doi.org/10.1186/1743-0003-5-25CrossRef

Haupert S, Renaud G, Schumm A (2017) Ultrasonic imaging of nonlinear scatterers buried in a medium. NDT & E Int 87:1–6. https://doi.org/10.1016/j.ndteint.2016.12.010CrossRef

Hwang YI, Kim HJ, Song SJ, Lim ZS, Yoo SW (2017) Improving the ultrasonic imaging of hydrogen-induced cracking using focused ultrasound. J Mech Sci Technol 31(8):3803–3809. https://doi.org/10.1007/s12206-017-0724-xCrossRef

Kaipio J, Somersalo E (2007) Statistical inverse problems: discretization, model reduction and inverse crimes. J Comput Appl Math 198(2):493–504. https://doi.org/10.1016/j.cam.2005.09.027MathSciNetCrossRefMATH

Kinsler LE, Frey AR, Coppens AB, Sanders JV (1999) Fundamentals of acoustics, 4th edn. Wiley, New Yorks

Letki L, Lamont M, Thompson T (2019) High frequency full waveform inversion as an interpretation solution. APPEA J 59(2):904–908. https://doi.org/10.1071/AJ18123CrossRef

Li YE, Demanet L (2016) Full-waveform inversion with extrapolated low-frequency data. Geophysics 81(6):R339–R348. https://doi.org/10.1190/geo2016-0038.1CrossRef

Liu Q, Liu J, Wu X, Han X, Cao L, Guan F (2019) An inverse reconstruction approach considering uncertainty and correlation for vehicle-vehicle collision accidents. Struct Multidiscip Optim, 1–18. https://doi.org/10.1007/s00158-019-02231-9

Lu L, Yamamoto T, Otomori M, Yamada T, Izui K, Nishiwaki S (2013) Topology optimization of an acoustic metamaterial with negative bulk modulus using local resonance. Finite Elem Anal Des 72:1–12. https://doi.org/10.1016/j.finel.2013.04.005MathSciNetCrossRefMATH

Machado T, Canelas A, Novotny A, Roche J (2018) Fast solution of the inverse electromagnetic casting problem. Struct Multidiscip Optim 57(6):2447–2455. https://doi.org/10.1007/s00158-017-1874-2MathSciNetCrossRef

Mello LAM, De Lima CR, Amato MBP, Lima RG, Silva ECN (2008) Three-dimensional electrical impedance tomography: a topology optimization approach. IEEE Trans Biomed Eng 55(2):531–540. https://doi.org/10.1109/TBME.2007.912637CrossRef

Mello LAM, de Sturler E, Paulino GH, Silva ECN (2010) Recycling krylov subspaces for efficient large-scale electrical impedance tomography. Comput Methods Appl Mech Eng 199(49):3101–3110. https://doi.org/10.1016/j.cma.2010.06.001MathSciNetCrossRefMATH

Moore EZ, Murphy KD, Nichols JM (2011) Crack identification in a freely vibrating plate using Bayesian parameter estimation. Mech Syst Signal Process 25(6):2125–2134. https://doi.org/10.1016/j.ymssp.2011.01.016CrossRef

Moré JJ (1978) The Levenberg-Marquardt algorithm: implementation and theory. In: Numerical analysis. Springer, pp 105–116

Morokov E, Khramtsova E, Kuevda E, Gubareva E, Grigoriev T, Lukanina K, Levin V (2019) Noninvasive ultrasound imaging for assessment of intact microstructure of extracellular matrix in tissue engineering. Artif Organs 43(11):1104–1110. https://doi.org/10.1111/aor.13516CrossRef

Mueller JL, Siltanen S (2012) Linear and nonlinear inverse problems with practical applications, vol 10. Siam

Noguchi Y, Yamamoto T, Yamada T, Izui K, Nishiwaki S (2017) A level set-based topology optimization method for simultaneous design of elastic structure and coupled acoustic cavity using a two-phase material model. J Sound Vib 404:15–30. https://doi.org/10.1016/j.jsv.2017.05.040CrossRef

Shu L, Wang MY, Fang Z, Ma Z, Wei P (2011) Level set based structural topology optimization for minimizing frequency response. J Sound Vib 330(24):5820–5834. https://doi.org/10.1016/j.jsv.2011.07.026CrossRef

Stegmann J, Lund E (2005) Discrete material optimization of general composite shell structures. Int J Numer Methods Eng 62(14):2009–2027. https://doi.org/10.1002/nme.1259CrossRefMATH

Tam JH (2020) Identification of elastic properties utilizing non-destructive vibrational evaluation methods with emphasis on definition of objective functions: a review. Struct Multidiscip Optim, 1–34. https://doi.org/10.1007/s00158-019-02433-1

Turteltaub S (2001) Optimal material properties for transient problems. Struct Multidiscip Optim 22(2):157–166. https://doi.org/10.1007/s001580100133MathSciNetCrossRef

Uhl T (2007) The inverse identification problem and its technical application. Arch Appl Mech 77(5):325–337. https://doi.org/10.1007/s00419-006-0086-9CrossRefMATH

Van hoorickx C, Sigmund O, Schevenels M, Lazarov BS, Lombaert G (2016) Topology optimization of two-dimensional elastic wave barriers. J Sound Vib 376:95–111. https://doi.org/10.1016/j.jsv.2016.04.039CrossRef

Vicente WM, Picelli R, Pavanello R, Xie YM (2015) Topology optimization of frequency responses of fluid-structure interaction systems. Finite Elem Anal Des 98:1–13. https://doi.org/10.1016/j.finel.2015.01.009CrossRef

Wadbro E, Berggren M (2006) Topology optimization of an acoustic horn. Comput Methods Appl Mech Eng 196(1–3):420–436. https://doi.org/10.1016/j.cma.2006.05.005MathSciNetCrossRefMATH

Wadbro E, Udawalpola R, Berggren M (2010) Shape and topology optimization of an acoustic horn-lens combination. J Comput Appl Math 234(6):1781–1787. https://doi.org/10.1016/j.cam.2009.08.028CrossRefMATH

Wang Y (2015) Frequencies of the ricker wavelet. Geophysics 80(2):A31–A37. https://doi.org/10.1190/geo2014-0441.1CrossRef

Warren C, Giannopoulos A, Giannakis I (2016) gprmax: open source software to simulate electromagnetic wave propagation for ground penetrating radar. Comput Phys Commun 209:163–170. https://doi.org/10.1016/j.cpc.2016.08.020CrossRef

Wirgin A (2004) The inverse crime. arXiv preprint math-ph/0401050

Yin L, Ananthasuresh G (2001) Topology optimization of compliant mechanisms with multiple materials using a peak function material interpolation scheme. Struct Multidiscip Optim 23(1):49–62. https://doi.org/10.1007/s00158-001-0165-zCrossRef

Yin L, Yang W (2000) Topology optimization for tunnel support in layered geological structures. Int J Numer Methods Eng 47(12):1983–1996CrossRef

Yoon GH, Jensen JS, Sigmund O (2007) Topology optimization of acoustic–structure interaction problems using a mixed finite element formulation. Int J Numer Methods Eng 70(9):1049–1075. https://doi.org/10.1002/nme.1900MathSciNetCrossRefMATH

Zhang C, Ulrych TJ (2002) Estimation of quality factors from cmp records. Geophysics 67 (5):1542–1547. https://doi.org/10.1190/1.1512799CrossRef

Zhang Y, Ye W (2019) Deep learning–based inverse method for layout design. Struct Multidiscip Optim 60(2):527–536. https://doi.org/10.1007/s00158-019-02222-wMathSciNetCrossRef

Zhu C, Byrd RH, Lu P, Nocedal J (1997) Algorithm 778: L-bfgs-b: Fortran subroutines for large-scale bound-constrained optimization. ACM Trans Math Softw 23(4):550–560. https://doi.org/10.1145/279232.279236MathSciNetCrossRefMATH

Titel: Identification problem of acoustic media in the frequency domain based on the topology optimization method
verfasst von: Juliano F. Gonçalves
João B. D. Moreira
Ruben A. Salas
Mohammad M. Ghorbani
Wilfredo M. Rubio
Emílio C. N. Silva
Publikationsdatum: 21.07.2020
Verlag: Springer Berlin Heidelberg
Erschienen in: Structural and Multidisciplinary Optimization / Ausgabe 3/2020
Print ISSN: 1615-147X
Elektronische ISSN: 1615-1488
DOI: https://doi.org/10.1007/s00158-020-02638-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2020

Accelerated topology optimization by means of deep learning

A novel space-constrained vehicle suspension mechanism synthesized by a systematic design process employing topology optimization

Multi-objective global optimum design of collaborative robots

On topology optimization with elliptical masks and honeycomb tessellation with explicit length scale constraints

Concurrent shape and topology optimization for unsteady conjugate heat transfer

A multi-objective optimization of the friction stir welding process using RSM-based-desirability function approach for joining aluminum alloy 6063-T6 pipes

Premium Partner

Marktübersichten