nach oben

Journal of Intelligent Manufacturing

Erschienen in:

25.11.2017

Impacts of wireless sensor networks strategies and topologies on prognostics and health management

verfasst von: Ahmad Farhat, Christophe Guyeux, Abdallah Makhoul, Ali Jaber, Rami Tawil, Abbas Hijazi

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this article, we used wireless sensor network (WSN) techniques for monitoring an area under consideration, in order to diagnose its state in real time. What differentiates this type of network from the traditional computer ones is that it is composed by a large number of sensor nodes having very limited and almost nonrenewable energy. A key issue in designing such networks is energy conservation because once a sensor depletes its resources, it will be dropped from the network. This will lead to coverage hole and incomplete data arriving to the sink. Therefore, preserving the energy held by the nodes so that the network keeps running for as long as possible is a very important concern. If we achieve to improve the network lifetime and Quality of Service (QoS). Diagnosing the state of area will be more accurate for a longer time. One of the most important elements to achieve a QoS in WSN is the network coverage which is usually interpreted as how well the network can observe a given area. Obviously, if the coverage decreases over time, the diagnosis quality decreases accordingly. Various coverage strategies are thus proposed by the WSN community, in order to guarantee a certain coverage rate as long as possible, to reach a certain QoS that in turn will impact the diagnosis and prognostic quality. Various other strategies are in common use in WSN like data aggregation and scheduling, to preserve a QoS in wireless sensor networks, as long as possible. We argue that such strategies are not neutral if this network is used for prognostic and health management. Some politics may have a positive impact while other ones may blur the sensed data, like data aggregation or redundancy suppression, leading to erroneous diagnostics and/or prognostics. In this work, we will show and measure the impact of each WSN strategy on the resulting estimation of diagnostics. We emphasized several issues and studied various parameters related to these strategies that have a very important impact on the network, and therefore on data diagnostics over time. To reach this goal, to evaluate both prognostic and health management with the WSN strategies, we have used six diagnostic algorithms.

Vorheriger Artikel Multi-objective optimization of abrasive waterjet machining process using Jaya algorithm and PROMETHEE Method

Nächster Artikel RT-OPTICS: real-time classification based on OPTICS method to monitor bearings faults

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Adlakha, S., & Srivastava, M. (2003). Critical density thresholds for coverage in wireless sensor networks. In Wireless communications and networking, 2003. WCNC 2003. 2003 IEEE (Vol. 3, pp. 1615–1620). IEEE.

Ahmed, M. H., Alam, S. W., Qureshi, N., & Baig, I. (2011). Security for wsn based on elliptic curve cryptography. In International conference on computer networks and information technology (ICCNIT) (pp. 75–79). IEEE.

Akan, Ö. B., & Akyildiz, I. F. (2005). Event-to-sink reliable transport in wireless sensor networks. IEEE/ACM Transactions on Networking (TON), 13(5), 1003–1016.

Akyildiz, I. F., Melodia, T., & Chowdhury, K. R. (2007). A survey on wireless multimedia sensor networks. Computer Networks, 51(4), 921–960.

Akyildiz, I. F., Su, W., Sankarasubramaniam, Y., & Cayirci, E. (2002). A survey on sensor networks. IEEE Communications Magazine, 40(8), 102–114.

Ammari, H. M. (2016). A unified framework for k-coverage and data collection in heterogeneous wireless sensor networks. Journal of Parallel and Distributed Computing, 89, 37–49.

Bae, S., Cha, H., & Suh, Y. (2014). Study on condition based maintenance using on-line monitoring and prognostics suitable to a research reactor. In European conference of the prognostics and health management society.

Bahi, J., Elghazel, W., Guyeux, C., Haddad, M., Hakem, M., Medjaher, K., et al. (2016). Resiliency in distributed sensor networks for prognostics and health management of the monitoring targets. The Computer Journal, 59(2), 275–284.

Bahi, J. M., Guyeux, C., Makhoul, A., & Pham, C. (2012). Low-cost monitoring and intruders detection using wireless video sensor networks. International Journal of Distributed Sensor Networks, 8(5), 929542.

Bahi, J. M., Makhoul, A., & Mostefaoui, A. (2008). Localization and coverage for high density sensor networks. Computer Communications, 31(4), 770–781.

Breiman, L. (1996). Bagging predictors. Machine Learning, 24, 123–140.

Breiman, L. (2001). Random forests. Machine Learning, 45, 5–32.

Bühlmann, P., & Hothorn, T. (2007). Boosting algorithms: Regularization, prediction and model fitting. Statistical Science, 22(4), 477–505.

Cardei, M., & Wu, J. (2004). Coverage in wireless sensor networks. Handbook of Sensor Networks, 21, 201–202.

Carman, D. W., Kruus, P. S., & Matt, B. J. (2000). Constraints and approaches for distributed sensor network security (final). DARPA Project report, (Cryptographic Technologies Group, Trusted Information System, NAI Labs), Vol. 1, no. 1.

Chang, R.-S., & Wang, S.-H. (2010). Deployment strategies for wireless sensor networks. In Handbook of research on developments and trends in wireless sensor networks: From principle to practice (pp. 20–37). IGI Global.

Choi, J., Hahn, J., & Ha, R. (2009). Short paper. Journal of Information Science and Engineering, 25, 273–287.

Elghazel, W., Bahi, J., Farhat, A., Guyeux, C., Hakem, M., Medjaher, K., & Zerhouni, N. (2015a) Random forests for industrial device functioning diagnostics using wireless sensor networks. In IEEE Aerospace conference (pp. 1–9). Big Sky, Montana, USA.

Elghazel, W., Bahi, J., Guyeux, C., Hakem, M., Medjaher, K., & Zerhouni, N. (2015b). Dependability of wireless sensor networks for industrial prognostics and health management. Computers in Industry, 68, 1–15.

Elghazel, W., Bahi, J., Guyeux, C., Hakem, M., Medjaher, K., & Zerhouni, N. (2015c). Prognostics and health management based on dependable wireless sensor networks. In SENSORNETS 2015, 4th international conference on sensor networks (pp. 1–15), Angers, France.

Elghazel, W., Medjaher, K., Guyeux, C., Hakem, M., Zerhouni, N., & Bahi, J. (2014). Dependable wireless sensor networks for prognostics and health management: A survey. In Annual conference of the prognostics and health management society, PHM’14 (Vol. 68, pp. 1–15). Fort Worth, Texas, USA.

Elghazel, W., Medjaher, K., Zerhouni, N., Bahi, J., Farhat, A., Guyeux, C., & Hakem, M. (2015d). Random forests for industrial device functioning diagnostics using wireless sensor networks. In Aerospace conference, 2015 IEEE (pp. 1–9). IEEE.

Estrin, D., Govindan, R., Heidemann, J., & Kumar, S. (1999). Next century challenges: Scalable coordination in sensor networks. In Proceedings of the 5th annual ACM/IEEE international conference on Mobile computing and networking (pp. 263–270). ACM.

Fan, G. J., & Jin, S. Y. (2010). Coverage problem in wireless sensor network: A survey. JNW, 5(9), 1033–1040.

Feng, J., Koushanfar, F., & Potkonjak, M. (2002). System-architectures for sensor networks issues, alternatives, and directions. In Computer design: VLSI in computers and processors, 2002. Proceedings. 2002 IEEE international conference on (pp. 226–231). IEEE.

Galar, D., Kumar, U., Lee, J., & Zhao, W. (2012). Remaining useful life estimation using time trajectory tracking and support vector machines. Journal of Physics: Conference Series 364, 012063. IOP Publishing.

Hareb, H., Makhoul, A., & Couturier, R. (2015). An enhanced K-means and ANOVA-based clustering approach for similarity aggregation in underwater wireless sensor networks. IEEE Sensors Journal, 15(10), 5483–5493.

Hareb, H., Makhoul, A., Tawil, R., & Jaber, A. (2014). Energy-efficient data aggregation and transfer in periodic sensor networks. IET Wireless Sensor Systems, 4(4), 149–158.

He, T. C., Cao, W. M., & Xie, W. X. (2009). Coverage analyses of plane target in sensor networks based on clifford algebra. Acta Electronica Sinica, 37(8), 1681–1685.

Hefeeda, M., & Ahmadi, H. (2010). Energy-efficient protocol for deterministic and probabilistic coverage in sensor networks. IEEE Transactions on Parallel and Distributed Systems, 21(5), 579–593.

Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009). Rotating machinery prognostics: State of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23(3), 724–739.

Ho, T. K. (1998). The random subspace method for constructing decision forests. IEEE Transactions on Pattern Analysis and Machine Intelligence, 20(8), 832–844.

ISO Condition Monitoring. (2004). Diagnostics of machines-prognostics part 1: General guidelines. ISO13381-1: (e). vol. ISO/IEC Directives Part 2, IO f. S (p. 14).

Jardine, A. K. S., Lin, D., & Banjevic, D. (2006). A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing, 20(7), 1483–1510.

Kantaros, Y., & Zavlanos, M. M. (2011). Lifetime and coverage guarantees through distributed coordinate-free sensor activation. IEEE/ACM Transactions on Networking, 19(2), 470–483.

Kantaros, Y., & Zavlanos, M. M. (2016). Distributed communication-aware coverage control by mobile sensor networks. Automatica, 63, 209–220.

Krishnamachari, L., Estrin, D., & Wicker, S. (2002). The impact of data aggregation in wireless sensor networks. In 22nd international conference on distributed computing systems workshops, 2002. Proceedings (pp. 575–578). IEEE.

Kwon, S., Ko, J. H., Kim, J., & Kim, C. (2011). Dinamic timeout for data aggregation in wireless sensor netwoks. Computer Networks, 55, 650–664.

Li, L., Zhang, B., & Zheng, J. (2013). A study on one-dimensional k-coverage problem in wireless sensor networks. Wireless Communications and Mobile Computing, 13(1), 1–11.

Li, M., Li, Z., & Vasilakos, A. V. (2013). A survey on topology control in wireless sensor networks: Taxonomy, comparative study, and open issues. Proceedings of the IEEE, 101(12), 2538–2557.

Li, M., & Yang, B. (2006). A survey on topology issues in wireless sensor network. In ICWN (p. 503).

Li, Z., & Gong, G. (2008). Survey on security in wireless sensor. Journal of the Korea Institute of Information Security and Cryptology, 18(6B), 233–248.

Liang, J., Liu, M., & Kui, X. (2014). A survey of coverage problems in wireless sensor networks. Sensors & Transducers, 163(1), 1726–5479.

Maheswari, K. M. U., Devi, S. K., & Govindarajan, S. (2011). Data aggregation in wireless sensor networks. Wireless. Communication, 3(6), 476–480.

Makhoul, A., Harb, H., & Laiymani, D. (2015a). Residual energy-based adaptive data collection approach for periodic sensor networks. Ad Hoc Networks, 35, 149–160.

Makhoul, A., Laiymani, D., Hareb, H., & Bahi, J. (2015b). An adaptive scheme for data collection and aggregation in periodic sensor networks. International Journal of Sensor Networks, 18(1/2), 62–74.

McRoberts, R. E. (2012). Estimating forest attribute parameters for small areas using nearest neighbors techniques. Forest Ecology and Management, 272, 3–12.

Ng, S. S. Y., Xing, Y., & Tsui, K. L. (2014). A naive bayes model for robust remaining useful life prediction of lithium-ion battery. Applied Energy, 118, 114–123.

Niu, G., & Yang, B.-S. (2010). Intelligent condition monitoring and prognostics system based on data-fusion strategy. Expert Systems with Applications, 37(12), 8831–8840.

Pathan, A.-S. K., Lee, H.-W., & Hong, C. S. (2006). Security in wireless sensor networks: Issues and challenges. In The 8th international conference advanced communication technology, 2006. ICACT 2006 (Vol. 2, pp. 6). IEEE.

Patil, A. K., & Patil, A. J. (2013). Issues of connectivity and coverage in wireless sensor networks. International Journal of Electrical and Electronics Engineering Research (IJEEER), 1(3), 249–258.

Peng, Y., Dong, M., & Zuo, M. J. (2010). Current status of machine prognostics in condition-based maintenance: a review. The International Journal of Advanced Manufacturing Technology, 50(1–4), 297–313.

Pham, C., Makhoul, A., & Saadi, R. (2011). Risk-based adaptive scheduling in randomly deployed video sensor networks for critical surveillance applications. Journal of Network and Computer Applications, 34(2), 783–795.

Raja, K., Daskalopoulos, I., Diall, H., Hailes, S., Torfs, T., Van Hoof, C., & Roussos, G. (2006). Sensor cubes: A modular, ultra-compact, power-aware platform for sensor networks. In International Conference on Information Processing in Sensor Networks (IPSN SPOTS). Citeseer.

Russell, S., & Norvig, P. (2003). Artificial intelligence: A modern approach (Vol. 22, pp. 25–26). London: Pearson education Inc.

Saxena, A., & Goebel, K. (2008). Phm08 challenge data set. NASA Ames Prognostics Data Repository. CA: NASA Ames Research Center, Moffett Field. http://ti.arc.nasa.gov/project/prognostic-data-repository.

Sikorska, J. Z., Hodkiewicz, M., & Ma, L. (2011). Prognostic modelling options for remaining useful life estimation by industry. Mechanical Systems and Signal Processing, 25(5), 1803–1836.

Silva, I., Guedes, L. A., Portugal, P., & Vasques, F. (2012). Reliability and availability evaluation of wireless sensor networks for industrial applications. Sensors, 12(1), 806–838.

Sugumaran, V., Muralidharan, V., & Ramachandran, K. I. (2007). Feature selection using decision tree and classification through proximal support vector machine for fault diagnostics of roller bearing. Mechanical Systems and Signal Processing, 21(2), 930–942.

Sun, B., Kang, R., & Jin-song, X. I. E. (2007). Research and application of the prognostic and health management system. Systems Engineering and Electronics, 10, 041.

Taherkordi, A., Taleghan, M. A., & Sharifi, M. (2006). Dependability considerations in wireless sensor networks applications. Journal of Networks, 1(6), 28–35.

Tian, D., & Georganas, N. D. (2003). A node scheduling scheme for energy conservation in large wireless sensor networks. Wireless Communications and Mobile Computing, 3(2), 271–290.

Tian, D., & Georganas, N. D. (2004). Location and calculation-free node-scheduling schemes in large wireless sensor networks. Ad Hoc Networks, 2(1), 65–85.

Tian, D., & Georganas, N. D. (2005). Connectivity maintenance and coverage preservation in wireless sensor networks ad hoc networks journal. Ad Hoc Networks Journal. Citeseer.

Tian, J., Liang, X., & Wang, G. (2016). Deployment and reallocation in mobile survivability-heterogeneous wireless sensor networks for barrier coverage. Ad Hoc Networks, 36, 321–331.

Tobon-Mejia, D. A., Medjaher, K., & Zerhouni, N. (2012a). CNC machine tool’s wear diagnostic and prognostic by using dynamic Bayesian networks. Mechanical Systems and Signal Processing, 28, 167–182.

Tobon-Mejia, D. A., Medjaher, K., Zerhouni, N., & Tripot, G. (2012b). A data-driven failure prognostics method based on mixture of Gaussians hidden Markov models. IEEE Transactions on Reliability, 61(2), 491–503.

Torkestani, J. A. (2013). An adaptive energy-efficient area coverage algorithm for wireless sensor networks. Ad Hoc Networks, 11(6), 1655–1666.

Walters, J. P., Liang, Z., Shi, W., & Chaudhary, V. (2007). Wireless sensor network security: A survey. Security in Distributed, Grid, Mobile, and Pervasive Computing, 1, 367.

Wang, L., & Xiao, Y. (2006). A survey of energy-efficient scheduling mechanisms in sensor networks. Mobile Networks and Applications, 11(5), 723–740.

Wang, X., Xing, G., Zhang, Y., Lu, C., Pless, R., & Gill, C. (2003). Integrated coverage and connectivity configuration in wireless sensor networks. In Proceedings of the 1st international conference on Embedded networked sensor systems (pp. 28–39). ACM.

Ye, W., Heidemann, J., & Estrin, D. (2002). An energy-efficient mac protocol for wireless sensor networks. In INFOCOM 2002. Twenty-first annual joint conference of the IEEE computer and communications societies. Proceedings. IEEE (Vol. 3, pp. 1567–1576). IEEE.

Yick, J., Mukherjee, B., & Ghosal, D. (2008). Wireless sensor network survey. Computer Networks, 52(12), 2292–2330.

Yuan, F., Zhan, Y., & Wang, Y. (2014). Data density correlation degree clustering method for data aggregation in wsn. IEEE Sensors Journal, 14(4), 1089–1098.

Zhang, H. (2004). The optimality of naive bayes. AA, 1(2), 3.

Zhu, C., Zheng, C., Shu, L., & Han, G. (2012). A survey on coverage and connectivity issues in wireless sensor networks. Journal of Network and Computer Applications, 35(2), 619–632.

Zio, E., & Di Maio, F. (2010). A data-driven fuzzy approach for predicting the remaining useful life in dynamic failure scenarios of a nuclear system. Reliability Engineering & System Safety, 95(1), 49–57.

Zorbas, D., Glynos, D., Kotzanikolaou, P., & Douligeris, C. (2007). B \(\{\)GOP\(\}\): An adaptive algorithm for coverage problems in wireless sensor networks. In 13th European wireless conference, EW.

Titel: Impacts of wireless sensor networks strategies and topologies on prognostics and health management
verfasst von: Ahmad Farhat
Christophe Guyeux
Abdallah Makhoul
Ali Jaber
Rami Tawil
Abbas Hijazi
Publikationsdatum: 25.11.2017
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 5/2019
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-017-1377-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2019

Comparative analysis of different digitization systems and selection of best alternative

Intelligent parametric design for a multiple-quality-characteristic glue-dispensing process

A comparison of dimension reduction techniques for support vector machine modeling of multi-parameter manufacturing quality prediction

A Cloud-based solution/reference architecture for establishing collaborative networked organizations

A new fuzzy QoS-aware manufacture service composition method using extended flower pollination algorithm

RT-OPTICS: real-time classification based on OPTICS method to monitor bearings faults

Premium Partner

Marktübersichten