nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

61. Increase in Hardness and Wear Resistance of Ti-6Al-4V Surface by In Situ Laser Coating of Ti- and Al-Based Hard Ceramics

verfasst von : Dipanjan Dey, Kalinga Simant Bal, Imran Khan, Ishan Bangia, Anitesh Kumar Singh, Asimava Roy Choudhury

Erschienen in: Advances in Micro and Nano Manufacturing and Surface Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Ti-6Al-4V alloy finds wide application starting from aerospace to bio-mechanical industry due to its high strength-to-weight ratio and biological immunity, but it exhibits poor tribological properties. With the help of laser energy, a composite coating was developed on Ti-6Al-4V with preplaced powders as Al, TiO_2, and hexagonal BN. A self-propagating high-temperature synthesis (SHS) reaction occurred between the preplaced powders by laser triggering, which helped to generate coating on the substrate. Microstructure and elemental analysis of coating were studied through SEM, EDS, and XRD analysis and it was found that the coating consisted of Al₂O₃, TiB₂, and TiN. Hardness and wear resistance of the developed coating were improved significantly. Maximum hardness on coating was found to be more than six times higher than substrate hardness, and wear resistance was improved three times as compared to the substrate. The coefficient of friction of coating was comparable to substrate coefficient friction.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel The Effect of Normal Load and Sliding Frequency on the Reciprocating Friction Behavior of Nanocrystalline CuO-Based Alumina Ceramics

Nächstes Kapitel Effect of Sigma Phase on Dry Sliding Wear Resistance and Surface Roughness of ASTM A890 Grade 6A Duplex Stainless Steels

Roy Choudhury, A., Ezz, T., Chatterjee, S., Li, L.: Microstructure and tribological behaviour of nano-structured metal matrix composite boride coatings synthesized by combined laser and sol–gel technology. Surf. Coat. Technol. 202, 2817–2829 (2008). https://doi.org/10.1016/j.surfcoat.2007.10.013CrossRef

Liu, C.T., Maziasz, P.J.: Microstructural control and mechanical properties of dual-phase TiAl alloys. Intermetallics 6, 653–661 (1998). https://doi.org/10.1016/S0966-9795(98)00062-4CrossRef

Chatterjee, S., Shariff, S.M., Padmanabham, G., Dutta Majumdar, J., Roy Choudhury, A.: Study on the effect of laser post-treatment on the properties of nanostructured Al₂O₃–TiB₂–TiN based coatings developed by combined SHS and laser surface alloying. Surf. Coat. Technol. 205, 131–138 (2010). https://doi.org/10.1007/s00170-011-3739-yCrossRef

Koechner, W.: Solid-State Laser Engineering. Springer, New York (1992)CrossRef

Yong, Y., Lan, J., Li, X.: Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy. Mater. Sci. Eng. A 380, 378–383 (2004). https://doi.org/10.1016/j.msea.2004.03.073CrossRef

Merzhanov, A.G.: History and recent developments in SHS. Ceram. Int. 21, 371–379 (1995). https://doi.org/10.1016/0272-8842(95)96211-7CrossRef

Borovinskaya, I.P.: Chemical classes of the SHS processes and materials. Pure Appl. Chem. 64(7), 919–940 (1992). https://doi.org/10.1351/pac199264070919CrossRef

Chatterjee, S., Shariff, S.M., Datta Majumdar, J., Roy Choudhury, A.: Development of nano-structured Al₂O₃-TiB₂-TiN coatings by combined SHS and laser surface alloying. Int. J. Adv. Manuf. Technol. 38, 938–943 (2008). https://doi.org/10.1007/s00170-007-1143-4CrossRef

Chatterjee, S., Ganesh, P., Palai, R., Wu, J.A., Kaul, R., Datta Majumdar, J., Roy Choudhury, A.: Effect of h-BN addition on the properties of nanostructured Al₂O₃–TiB₂–TiN based coatings developed by combined SHS and laser surface alloying. Surf. Coat. Technol. 204, 1702–1709 (2010). https://doi.org/10.1007/s00170-011-3739-yCrossRef

10.

Haldar, B., Karmakar, S., Saha, P., Chattopadhyay, A.B.: In situ multi-component MMC coating developed on Ti-6Al-4V substrate. Surf. Eng. 30, 256–262 (2014). https://doi.org/10.1179/1743294414Y.0000000252CrossRef

11.

Chatterjee, S., Dutta Majumdar, J., Singaiah, K., Shariff, S.M., Padmanabham, G., Roy Choudhury, A.: Performance evaluation of laser surface alloyed hard nanostructured Al₂O₃–TiB₂–TiN composite coatings with in-situ and ex-situ reinforcements. Surf. Coat. Technol. 205, 3478–3484 (2011). https://doi.org/10.1016/j.surfcoat.2010.12.015CrossRef

Titel: Increase in Hardness and Wear Resistance of Ti-6Al-4V Surface by In Situ Laser Coating of Ti- and Al-Based Hard Ceramics
verfasst von: Dipanjan Dey
Kalinga Simant Bal
Imran Khan
Ishan Bangia
Anitesh Kumar Singh
Asimava Roy Choudhury
Verlag: Springer Singapore
Buch: Advances in Micro and Nano Manufacturing and Surface Engineering
Print ISBN: 978-981-329-424-0

Electronic ISBN: 978-981-329-425-7

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-32-9425-7_61

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht