nach oben

Polymer Science, Series D

Erschienen in:

01.06.2022

Increasing the Adhesion of Styrene–Acrylic Coatings Modified by Schungite Filler in Protection of Building Materials

verfasst von: V. F. Stroganov, M. O. Amel’chenko, R. Kh. Mukhametrakhimov, E. A. Vdovin, R. K. Tabaeva

Erschienen in: Polymer Science, Series D | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The durability of building materials protected with polymer coatings mainly depends on the level of their adhesive strength. The wide range of building materials necessitate that measures be taken for long-term retention of high values of the adhesion index to the protected surfaces. It has been shown that modification with the carbon-containing filler schungite is a rather effective method to improve the properties of styrene–acrylic protective coatings. The possibility of providing high values of adhesive strength from 1.6 to 3.1 MPa for various building materials (steel, concrete, ceramic, and silicate bricks) has been established. There were no defects on the surface and discontinuity of the protective coatings after their exposure in aggressive media for 7 days.

Vorheriger Artikel Properties of an Epoxy Blends Modified with a Thermoplastic Heat-Resistant Polymer and an Active Diluent for Manufacture of Reinforced Plastics

Nächster Artikel Thermogravimetric Analysis of a Weld-Bonded Joint with Various Types of Adhesive Materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Khataee, L. Moradkhannejhad, V. Heydari, B. Vahid, and S. W. Joo, “Self-cleaning acrylic water-based white paint modified with different types of TiO₂ nanoparticles,” Pigm. Resin Technol. 45 (1), 24–29 (2016). https://doi.org/10.1108/PRT-09-2014-0070CrossRef

F. Sbardella, L. Pronti, M. L. Santarelli, J. M. A. Gonzàlez, and M. P. Bracciale, “Waterborne acrylate-based hybrid coatings with enhanced resistance properties on stone surfaces,” Coatings 8 (8), 283 (2018). https://doi.org/10.3390/coatings8080283CrossRef

M. S. Shcherbakova, Yu. F. Shutilin, and V. V. Moiseev, “Influence of the composition of the painting material on the properties of coatings,” Vestn. Voronezh. Gos. Univ. Inzh. Tekhnol., No. 1, 135–137 (2013). https://doi.org/10.20914/2310-1202-2013-1-135-137

C. R. Hegedus, F. R. Pepe, J. B. Dickenson, and F. H. Walker, “Waterborne acrylic-epoxy coatings,” J. Coat. Technol. 74, 31–39 (2002). https://doi.org/10.1007/bf02720162CrossRef

C. E. Dillon, A. F. Lagalante, and R. C. Wolbers, “Acrylic emulsion paint films: the effect of solution pH, conductivity, and ionic strength on film swelling and surfactant removal,” Stud. Conserv. 59 (1), 52–62 (2014). https://doi.org/10.1179/2047058412Y.0000000076CrossRef

Yu. G. Ivashchenko, N. N. Fomina, and A. R. Ismagilov, “Analysis of styrene-acrylic dispersions as binders for building paints,” Vestn. Belgorod. Gos. Tekhnol. Univ. im. V.G. Shukhova 3 (1), 6–11 (2018). https://doi.org/10.12737/article_5a5dbd2d492241.03354026

S. N. Gladkikh, A. I. Vyalov, A. S. Shestakov, and A. S. Nechepurenko, “The dependence of properties of construction adhesives on the nature of the boron nitride filler,” Klei. Germetiki. Tekhnol., No. 4, 28–35 (2011).

N. A. Adamenko, A. V. Kazurov, K. Yu. Zershchikov, and E. V. Sedov, “The effect of filler on the thermomechanical properties of polyetheretherketone,” Izv. Volgograd. Gos. Tekh. Univ., No. 4 (64), 52–54 (2010).

A. A. Donskoi and N. V. Baritko, “Low density fillers for sealants,” Klei. Germetiki. Tekhnol., No. 5, 14–21 (2006).

10.

R. R. Galeev, R. K. Nizamov, and L. A. Abdrakhmanova, “Filling of epoxy polymers with chemically precipitated chalk from chemical water treatment sludge,” in Proceedings of the International Conf. “Industrial and Civil Construction 2021”, Lecture Notes Civ. Eng., vol. 147 (Springer, Cham, 2021), pp. 93–97. https://doi.org/10.1007/978-3-030-68984-1_14

11.

R. Galeev, R. Nizamov, and L. Abdrakhmanova, “Influence of dispersed fillers on properties and processability of polyvinyl chloride compositions,” E3S Web Conf. 164, 14018 (2020). https://doi.org/10.1051/e3sconf/202016414018

12.

M. A. Kart, S. G. Tarasov, and V. A. Voitovich, “Prospects for the use of fluidized-bed devices for production of coatings,” Polym. Sci., Ser. D 10, 84–86 (2017).

13.

E. A. Vdovin, V. F. Stroganov, and N. V. Konovalov, “Modification of road soil cement with activated fillers,” in Proceedings of EECE 2020 “Energy, Environmental and Construction Engineering” (Springer, Cham, 2020), pp. 335–345. https://doi.org/10.1007/978-3-030-72404-7-33

14.

G. A. Petukhova and T. A. Kul’kova, “Prospective use of shungite as a formaldehyde sorbent in composite materials,” Sorbtsionnye Khromatogr. Protsessy 21 (1), 100–110 (2021). https://doi.org/10.17308/sorpchrom.2021.21/3225CrossRef

15.

O. V. Mosin and I. I. Ignatov, “Composition and structural properties of the natural fullerene-containing mineral shungite,” Biotekhnosfera, No. 1 (25), 29–33 (2013).

16.

N. R. Prokopchuk, E. T. Krut’ko, and A. I. Globa, Chemical Modification of Film-Forming Substances (Belarusian State Technological Univ., Minsk, 2012) [in Russian].

17.

U. Poth, R. Schwalm, and M. Schwartz, Acrylic Resins (Vincentz Network, Hanover, 2011).

Titel: Increasing the Adhesion of Styrene–Acrylic Coatings Modified by Schungite Filler in Protection of Building Materials
verfasst von: V. F. Stroganov
M. O. Amel’chenko
R. Kh. Mukhametrakhimov
E. A. Vdovin
R. K. Tabaeva
Publikationsdatum: 01.06.2022
Verlag: Pleiades Publishing
Erschienen in: Polymer Science, Series D / Ausgabe 2/2022
Print ISSN: 1995-4212
Elektronische ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222020277

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2022

The Influence of the Synergistic Effects of Sodium Bis(2-ethylhexyl)sulfosuccinate and Lecithin at the Water/Liquid Paraffin–Oil Interface on the Properties of Self-Organizing Structures

Fungal Resistance of Thiokol Sealants to Tropical Microorganisms and Test Cultures. Part 1

Isophorone Diamine—A Curing Agent for Epoxy Resins: Production, Application, Prospects. A Review

Recovering a Reducing-Gear Shaft Neck by Reinforced-Bush Adhesion

Studying Low-Temperature Properties of Bitumen Materials

The Effect of Reinforcing Fillers of Different Types on Properties of VK-51 Adhesive

Premium Partner

Marktübersichten