nach oben

Metallurgist

Erschienen in:

05.07.2021

Increasing the Operational Efficiency of Insulation Liners in the Air Passage of Blast-Furnace Tuyeres

verfasst von: E. A. Volkov, A. G. Radyuk, A. L. Terebov, A. E. Titlyanov

Erschienen in: Metallurgist | Ausgabe 3-4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

It is shown experimentally and computationally that the elongation of the insulation liner in the air passage to the tuyere nose reduces substantially the heat losses with cooling water. To improve its efficiency, it is reasonable to make the liner thickness uniformly decrease from the flange to the nose and to apply slurry coating to the inner surface of the liner. Improving the liner design allowed reducing the heat losses by 26.2% compared with commercial liner and increasing its life by a factor of 1.9 compared with the elongated liner with constant thickness in the inner shell and variable thickness in the nose.

Vorheriger Artikel Metallurgist Volume 65, Number 4

Nächster Artikel Methodology for Development and Testing of Electromagnetic Stirring Systems in Billet and Bloom CCMs

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. V. Borodulin, A. P. Vasil’ev, E. L. Glushchenko, et al., “The information content of the heat losses in the hearth of blast furnaces,” in: Proc. 2nd Int. Sci.-Pract. Conf. on Automated Furnace Units and Energy-Saving Technologies in Metallurgy [in Russian], Izd. MISiS, Moscow (2002), pp. 424–426.

A. A. Bondarenko, A. S. Gorbik, and G. G. Dyshlevich, “Study of thermal stress in various sections of tuyeres,” Stal’, No. 7, 11–12 (1983).

A. Kikuo, A Tuyere for Blast Furnace [Russian translation], Patent No. 2779514 B2 2240207 A JP, C21B7/16, appl. Mar. 13, 1989; publ. Mar. 2001; Byull. No. 47.

E. N. Vinogradov, A. G. Radyuk, E. A. Volkov, A. L. Terebov, and T. Y. Sidorova, “Reducing heat losses through blast furnace tuyeres,” Steel in Transl., 49, No. 11, 778–782 (2019); https://doi.org/10.3103/S0967091219110160.CrossRef

A. G. Radyuk, A. E. Titlyanov, and T. Y. Sidorova, “Effect of slurry coating on the resistance of thermal insulation insert in blast furnace air tuyere,” Metallurgist, 63, No. 11–12, 1153–1159 (2020); https://doi.org/10.1007/s11015-020-00935-8.

A. G. Radyuk, A. E. Titlyanov, and T. Y. Sidorova, “Thermal state of air tuyeres in blast furnaces,” Steel in Transl., 46, No. 9, 624–628 (2016); https://doi.org/10.3103/S0967091216090084.CrossRef

A. G. Radyuk, A. E. Titlyanov, and M. M. Skripalenko, “Modeling of the temperature field of blast furnace tuyeres using Deform-2D software,” Metallurgist, 60, No. 9–10, 1011–1015 (2017); https://doi.org/10.1007/s11015-017-0400-5.

Y. S. Tarasov, M. M. Skripalenko, A. G. Radyuk, and A. E. Titlyanov, “Computer simulation of thermal and stress–strain state of blast furnace tuyeres,” Metallurgist, 62, No. 11–12, 1083–1091 (2019); DOI: https://doi.org/10.1007/s11015-019-00760-8.

A. G. Radyuk, S. M. Gorbatyuk, Y. S. Tarasov, A. E. Titlyanov, and A. V. Aleksakhin, “Improvements to mixing of natural gas and hot-air blast in the air tuyeres of blast furnaces with thermal insulation of the blast duct,” Metallurgist, 63, No. 5-6, 433–440 (2019); https://doi.org/10.1007/s11015-019-00843-6.

10.

S. M. Gorbatyuk, Y. S. Tarasov, I. A. Levitskii, A. G Radyuk, and A. E. Titlyanov, “Effect of a ceramic insert with swirler on gas dynamics and heat exchange in a blast furnace tuyere,” Izvest. Ferr. Metall., 62, No. 5, 337–344 (2019); https://doi.org/10.17073/0368-0797-2019-5-337-344.

11.

Y. S. Tarasov, A. G. Radyuk, and S. M. Gorbatyuk, “Effect of the thermal insulation of the inner wall on the thermal condition of the air tuyeres of blast furnaces,” Metallurgist, 61, No. 9-10, 745–750 (2018); https://doi.org/10.1007/s11015-018-0558-5.

12.

Y. Tarasov, A. Radyuk, and S. Gorbatyuk, “Simulation of heat losses and temperature of blast furnaces tuyeres,” MATEC Web of Conf., 129, No. 06031 (2017); https://doi.org/10.1051/matecconf/201712906031.

13.

Y. Tarasov, A. Radyuk, and S. Gorbatyuk, “Research of heat stresses in components of blast furnace tuyere,” MATEC Web of Conf., 224, No. 02029 (2018); https://doi.org/10.1051/matecconf/201822402029.

14.

A. G. Radyuk, A. E. Titlyanov, Y. S. Tarasov, and T. Y. Sidorova, “Decreasing the heat losses at the air tuyeres in blast furnaces,” Steel in Transl., 49, No. 4, 257–260 (2019); https://doi.org/10.3103/S0967091219040119.CrossRef

15.

M. M. Skripalenko, V. E. Bazhenov, B. A. Romantsev, M. N. Skripalenko, A. V. Koltygin, and А. А. Sidorov, “Computer modeling of chain processes in the manufacture of metallurgical products,” Metallurgist, 58, No. 1-2, 86–90 (2014).

16.

M. N. Skripalenko, M. M. Skripalenko, D. A. Ashikhmin, A. A. Sidorov, and Xu. Yang, “Wavelet analysis of fluctuations in the thickness of cold-rolled strip,” Metallurgist, 57, No. 7-8, 606–611 (2013).

Titel: Increasing the Operational Efficiency of Insulation Liners in the Air Passage of Blast-Furnace Tuyeres
verfasst von: E. A. Volkov
A. G. Radyuk
A. L. Terebov
A. E. Titlyanov
Publikationsdatum: 05.07.2021
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 3-4/2021
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-021-01165-2

Development and Investigation of Piercing Process Using Cooled Guide Shoes

Development and Study of Conditions for Rolling Brass Sheets with Turning Providing Rolled Product Improved Quality

Establishment of the Temperature Field Model of 72LX Blooms in the Reheating Furnace

Automatic Temperature Control System for Electric Resistance Annealing of Steel Welding Wire

Tests of Briquettes for Mechanical Strength

Thermal Aging of High-Strength Corrosion-Resistant Austenitic Stainless Steel and its Thermal Stability

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Bildnachweise

MKVS GbR/© MKVS GbR, Nordson/© Nordson, ViscoTec/© ViscoTec, BCD Chemie GmbH, Merz+Benteli/© Merz+Benteli, Robatech/© Robatech, Hermann Otto GmbH/© Hermann Otto GmbH, Ruderer Klebetechnik GmbH, Fere/© Fere, Xometry Europe GmbH/© Xometry Europe GmbH, Scheugenpflug/© Scheugenpflug, Sika/© Sika, Medmix/© Medmix, Kisling AG/© Kisling AG, Dosmatix GmbH/© Dosmatix GmbH, Innotech GmbH/© Innotech GmbH, Hilger u. Kern GmbH, VDI Logo/© VDI Wissensforum GmbH