nach oben

Electrical Engineering

Erschienen in:

15.04.2019 | Original Paper

Inductive coupling system for electric scooter wireless charging: electromagnetic design and thermal analysis

verfasst von: Vladimir Kindl, Roman Pechanek, Martin Zavrel, Tomas Kavalir, Pavel Turjanica

Erschienen in: Electrical Engineering | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper deals with construction design and laboratory measurement of magnetic inductive coupling system suitable for electric scooter wireless chargers. It briefly elaborates design process relating to the system configuration, material used for construction and obtained operational conditions. The paper also discusses the thermal behavior of the couplers operating under load and describes fully automatic laboratory equipment for the system experimental testing.

Vorheriger Artikel Emerging trends in power electronics, electric drives, power and energy storage systems

Nächster Artikel Comparison of perspective dual interleaved boost converters with demagnetizing circuit

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Lukaniszyn M, Wrobel R (2000) A study on the influence of permanent magnet dimensions and stator core structures on the torque of the disc-type brushless DC motor. Electr Eng 82:163. https://doi.org/10.1007/s002020050007 CrossRef

Nagatsuka Y, Ehara N, Kaneko Y, Abe S, Yasuda T (2010) Compact contactless power transfer system for electric vehicles. In: The 2010 international power electronics conference–ECCE ASIA, Sapporo, 2010, pp 807–813. https://doi.org/10.1109/ipec.2010.5543313

Sallan J, Villa JL, Llombart A, Sanz JF (2009) Optimal design of ICPT systems applied to electric vehicle battery charge. IEEE Trans Ind Electron 56(6):2140–2149. https://doi.org/10.1109/TIE.2009.2015359 CrossRef

Li XT, Kuang HJ, Zulati L (2013) A research on the operational characteristics of WPT considering reliability limitation. In: Proceedings of the 2013 international conference on advanced mechatronic systems, Luoyang, 2013, pp 213–218. https://doi.org/10.1109/icamechs.2013.6681780

Zhao J, Cai T, Duan S, Feng H, Chen C, Zhang X (2016) A general design method of primary compensation network for dynamic WPT system maintaining stable transmission power. IEEE Trans Power Electron 31(12):8343–8358. https://doi.org/10.1109/TPEL.2016.2516023 CrossRef

Baghdadi ME, Benomar Y, Hegazy O, Yang Y, Van Mierlo J (2016) Design approach and interoperability analysis of wireless power transfer systems for vehicular applications. In: 2016 18th European conference on power electronics and applications (EPE’16 ECCE Europe), Karlsruhe, 2016, pp 1–11. https://doi.org/10.1109/epe.2016.7695695

Zhang W, Mi CC (2016) Compensation topologies of high-power wireless power transfer systems. IEEE Trans Veh Technol 65(6):4768–4778. https://doi.org/10.1109/TVT.2015.2454292 CrossRef

Wang Y, Yao Y, Liu X, Xu DG, Cai L (2018) An LC/S compensation topology and coil design technique for wireless power transfer. IEEE Trans Power Electron 33(99):1. https://doi.org/10.1109/tpel.2017.2698002 CrossRef

Aditya K (2018) Analytical design of Archimedean spiral coils used in inductive power transfer for electric vehicles application. Electr Eng 100:1819. https://doi.org/10.1007/s00202-017-0663-7 CrossRef

10.

Jin X, Le L, Pude Y (2018) Research on the system characteristics of radial offset based on double LCCL. Electr Eng 100:711. https://doi.org/10.1007/s00202-017-0665-5 CrossRef

11.

Frivaldsky M, Piri M, Spanik P et al (2017) Peak efficiency and peak power point operation of wireless energy transfer (WET) system—analysis and verification. Electr Eng 99:1439. https://doi.org/10.1007/s00202-017-0658-4 CrossRef

12.

Berger A, Agostinelli M, Vesti S, Oliver JA, Cobos JA, Huemer M (2015) A wireless charging system applying phase-shift and amplitude control to maximize efficiency and extractable power. IEEE Trans Power Electron 30(11):6338–6348. https://doi.org/10.1109/TPEL.2015.2410216 CrossRef

13.

Mai R, Liu Y, Li Y, Yue P, Cao G, He Z. An active rectifier based maximum efficiency tracking method using an additional measurement coil for wireless power transfer. IEEE Trans Power Electron. https://doi.org/10.1109/tpel.2017.2665040

14.

Zhang W, Wong SC, Tse CK, Chen Q (2014) Design for efficiency optimization and voltage controllability of series–series compensated inductive power transfer systems. IEEE Trans Power Electron 29(1):191–200. https://doi.org/10.1109/TPEL.2013.2249112 CrossRef

15.

Rui Z, Gladwin DT, Stone DA. Phase shift control based maximum efficiency point tracking in resonant wireless power system and its realization. In: IECON 2016–42nd annual conference of the IEEE industrial electronics society, Florence, 2016, pp. 4541–4546. https://doi.org/10.1109/iecon.2016.7794117

16.

Patil D, Sirico M, Gu L, Fahimi B (2016) Maximum efficiency tracking in wireless power transfer for battery charger: phase shift and frequency control. In: 2016 IEEE energy conversion congress and exposition (ECCE), Milwaukee, WI, 2016, pp 1–8. https://doi.org/10.1109/ecce.2016.7855234

17.

Kozacek B, Kostal J, Frivaldsky M (2015) Analysis of figure of merit–power transistor’s qualitative parameter. In: 2015 16th international scientific conference on electric power engineering (EPE), Kouty nad Desnou, 2015, pp 718–722. https://doi.org/10.1109/epe.2015.7161144

18.

Frivaldsky M, Drgona P, Kozacek B, Piri M, Pridala M (2016) Critical component’s figure of merite influence on power supply unit efficiency. In: 2016 ELEKTRO, Strbske Pleso, 2016, pp 147–151. https://doi.org/10.1109/elektro.2016.7512054

19.

Spanik P, Frivaldsky M, Drgona P, Jaros V (2016) Analysis of proper configuration of wireless power transfer system for electric vehicle charging. In: 2016 ELEKTRO, Strbske Pleso, 2016, pp 231–237. https://doi.org/10.1109/elektro.2016.7512071

20.

Spanik P, Frivaldsky M, Piri M, Jaros V, Kondelova A (2016) Peak efficiency and peak power point of wireless power transfer system for electromobility applications. In: 2016 ELEKTRO, Strbske Pleso, 2016, pp 226–230. https://doi.org/10.1109/elektro.2016.7512070

21.

Pellitteri F, Di Tommaso AO, Miceli R (2015) Investigation of inductive coupling solutions for E-bike wireless charging. In: 2015 50th international universities power engineering conference (UPEC), Stoke on Trent, 2015, pp 1–6. https://doi.org/10.1109/upec.2015.7339964

22.

Fuengwarodsakul NH (2016) Battery management system with active inrush current control for Li-ion battery in light electric vehicles. Electr Eng 98:17. https://doi.org/10.1007/s00202-015-0344-3 CrossRef

23.

Pellitteri F, Boscaino V, Di Tommaso AO, Miceli R, Capponi G (2013) Wireless battery charging: E-bike application. In: 2013 international conference on renewable energy research and applications (ICRERA), Madrid, 2013, pp 247–251. https://doi.org/10.1109/icrera.2013.6749760

24.

Kim SM, Kim SW, Moon J-I, Cho I-K (2016) A 100 W wireless charging system with a human protection function from EM field exposure. In: 2016 IEEE transportation electrification conference and expo, Asia-Pacific (ITEC Asia-Pacific), Busan, 2016, pp 684–688. https://doi.org/10.1109/itec-ap.2016.7513040

25.

Pellitteri F, Boscaino V, Di Tommaso AO, Genduso F, Miceli R (2013) E-bike battery charging: methods and circuits. In: 2013 international conference on clean electrical power (ICCEP), Alghero, 2013, pp 107–114. https://doi.org/10.1109/iccep.2013.6586975

26.

Hu J et al (2018) Hybrid energy storage system of an electric scooter based on wireless power transfer. IEEE Trans Ind Inform 14(9):4169–4178. https://doi.org/10.1109/TII.2018.2806917 CrossRef

27.

Ando T, Omori H, Kimura N, Morizane T (2018) Innovative EDLC driven electric scooter with unique power supply systems. In: 2018 IEEE international power electronics and application conference and exposition (PEAC), Shenzhen, 2018, pp 1–6. https://doi.org/10.1109/peac.2018.8590587

28.

Wang C-S, Stielau OH, Covic GA (2005) Senior member, IEEE, design considerations for a contactless electric vehicle battery charger. IEEE Trans Ind Electron 52(5):1308–1314CrossRef

29.

Ongayo D, Hanif M (2015) Comparison of circular and rectangular coil transformer parameters for wireless power transfer based on finite element analysis. In: 2015 IEEE 13th Brazilian power electronics conference and 1st southern power electronics conference (COBEP/SPEC), Fortaleza, 2015, pp 1–6. https://doi.org/10.1109/cobep.2015.7420222

30.

Rasekh N, Mirsalim M (2018) Analysis of a compact and efficient DDQ pad integrated to the LCC compensation topology for IPT. In: 2018 9th annual power electronics, drives systems and technologies conference (PEDSTC), Tehran, 2018, pp 26–29. https://doi.org/10.1109/pedstc.2018.8343766

31.

Ferroxcube: ferrite materials survey [online] (2008) Sep 01 [cit. 2018-08-14]. http://ferroxcube.home.pl/prod/assets/sfmatgra_frnt.pdf

32.

Engineering ToolBox (2003) Thermal conductivity of common materials and gases. https://www.engineeringtoolbox.com/thermal-conductivity-d_429.html. Accessed 2018-08-14

Titel: Inductive coupling system for electric scooter wireless charging: electromagnetic design and thermal analysis
verfasst von: Vladimir Kindl
Roman Pechanek
Martin Zavrel
Tomas Kavalir
Pavel Turjanica
Publikationsdatum: 15.04.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Electrical Engineering / Ausgabe 1/2020
Print ISSN: 0948-7921
Elektronische ISSN: 1432-0487
DOI: https://doi.org/10.1007/s00202-019-00765-1

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Jonas Klose/© Pine Valley Capital GmbH, Carina Kießling von der Strategieberatung Roland Berger/© Monika Walther Fotografie | ATZ, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 1/2020

Utilization of finite state machine approach for microgrid modeling

ANFIS current–voltage controlled MPPT algorithm for solar powered brushless DC motor based water pump

Direct power control strategy for an axial flux permanent magnet synchronous machine

Optimal rotor design of novel outer rotor reluctance synchronous machine

A model reference-based adaptive PSS4B stabilizer for the multi-machines power system

Real-time emulation of a three-phase Vienna rectifier with DC voltage control and power factor correction

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.