Skip to main content
Erschienen in: Metals and Materials International 9/2021

13.11.2020

Influence of Evolution in Anisotropy During Strain Path Change on Failure Limits of Sheet Metals

verfasst von: Kaushik Bandyopadhyay, Shamik Basak, Hongjin Choi, Sushanta K. Panda, Myoung-Gyu Lee

Erschienen in: Metals and Materials International | Ausgabe 9/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Effects of evolution in anisotropy during plastic deformation under strain path changes on the formability and failure were investigated in the present study. The evolution in anisotropic property of the extra deep drawing steel was considered by implementing the non-quadratic anisotropic yield function Yld2000-2d as a function of effective plastic strain, and the corresponding forming behaviour in two-step forming processes was analysed. For the strain path effect, pre-strain was applied under biaxial mode using Marciniak in-plane stretch forming set-up, followed by the secondary deformation using the out-of-plane stretch forming tool. For failure prediction of the proposed two-step forming, different failure limit approaches were investigated. First, a strain based forming limit diagram (FLD), proposed as the Marciniak–Kuczynski model was modified to include the evolution in anisotropic yield function. The dynamic shift in FLD was also determined by taking strain path change into consideration. In addition, the influence of evolution of yield function on the strain path independent failure limit criteria was also assessed in terms of stress based forming limit diagram. Finally, the prediction accuracy of the failure limit criteria was compared among different models in terms of failure location and limiting dome height (LDH). It was observed that the incorporation of evolution in anisotropic yield surface improved the prediction of formability in terms of the LDH and strain distribution for the investigated material.

Graphic Abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
Zurück zum Zitat K. Nakazima, T. Kikuma, K. Hasuka, Yawata Technical Report 264, 8517 (1968) K. Nakazima, T. Kikuma, K. Hasuka, Yawata Technical Report 264, 8517 (1968)
2.
Zurück zum Zitat V. Hasek, Blech Rohre Profile 25, 213 (1978) V. Hasek, Blech Rohre Profile 25, 213 (1978)
3.
Zurück zum Zitat S.S. Hecker, Met. Eng. Quart. 14, 30 (1974) S.S. Hecker, Met. Eng. Quart. 14, 30 (1974)
4.
Zurück zum Zitat R.T. Hill, J. Mech. Phys. Solids 1, 19 (1952) R.T. Hill, J. Mech. Phys. Solids 1, 19 (1952)
5.
Zurück zum Zitat Z. Marciniak, K. Kuczyński, Int. J. Mech. Sci. 9, 609 (1967) Z. Marciniak, K. Kuczyński, Int. J. Mech. Sci. 9, 609 (1967)
6.
Zurück zum Zitat Z. Marciniak, K. Kuczyński, T. Pokora, Int. J. Mech. Sci. 15, 789 (1973) Z. Marciniak, K. Kuczyński, T. Pokora, Int. J. Mech. Sci. 15, 789 (1973)
7.
Zurück zum Zitat V. Tvergaard, A. Needleman, Acta Metall. 32, 157 (1984) V. Tvergaard, A. Needleman, Acta Metall. 32, 157 (1984)
8.
Zurück zum Zitat S. Stören, J.R. Rice, J. Mech. Phys. Solids 23, 421 (1975) S. Stören, J.R. Rice, J. Mech. Phys. Solids 23, 421 (1975)
9.
Zurück zum Zitat R. Sowerby, J.L. Duncan, Int. J. Mech. Sci. 13, 217 (1971) R. Sowerby, J.L. Duncan, Int. J. Mech. Sci. 13, 217 (1971)
10.
Zurück zum Zitat D. Banabic, E. Dannenmann, J. Mater. Process. Technol. 109, 1 (2001) D. Banabic, E. Dannenmann, J. Mater. Process. Technol. 109, 1 (2001)
11.
Zurück zum Zitat S. Panich, F. Barlat, V. Uthaisangsuk, S. Suranuntchai, S. Jirathearanat, Mater. Des. 51, 756 (2013) S. Panich, F. Barlat, V. Uthaisangsuk, S. Suranuntchai, S. Jirathearanat, Mater. Des. 51, 756 (2013)
12.
Zurück zum Zitat A. Graf, W. Hosford, Metall. Trans. A 24, 2503 (1993) A. Graf, W. Hosford, Metall. Trans. A 24, 2503 (1993)
13.
Zurück zum Zitat S. Basak, S.K. Panda, J. Mater. Process. Technol. 267, 289 (2019) S. Basak, S.K. Panda, J. Mater. Process. Technol. 267, 289 (2019)
14.
Zurück zum Zitat A.B. Da Rocha, F. Barlat, J.M. Jalinier, Mater. Sci. Eng. 68, 151 (1985) A.B. Da Rocha, F. Barlat, J.M. Jalinier, Mater. Sci. Eng. 68, 151 (1985)
15.
Zurück zum Zitat M.C. Butuc, F. Barlat, J.J. Gracio, A.B. da Rocha, Int. J. Mater. Form. 3, 191 (2010) M.C. Butuc, F. Barlat, J.J. Gracio, A.B. da Rocha, Int. J. Mater. Form. 3, 191 (2010)
16.
Zurück zum Zitat T.B. Stoughton, J. Eng. Mater. Technol. 123, 417 (2001) T.B. Stoughton, J. Eng. Mater. Technol. 123, 417 (2001)
17.
Zurück zum Zitat P.D. Wu, A. Graf, S.R. MacEwen, D.J. Lioyd, M. Jain, K.W. Neale, Int. J. Solids Struct. 42, 2225 (2005) P.D. Wu, A. Graf, S.R. MacEwen, D.J. Lioyd, M. Jain, K.W. Neale, Int. J. Solids Struct. 42, 2225 (2005)
18.
Zurück zum Zitat K. Yoshida, T. Kuwabara, M. Kuroda, Int. J. Plast. 23, 361 (2007) K. Yoshida, T. Kuwabara, M. Kuroda, Int. J. Plast. 23, 361 (2007)
19.
Zurück zum Zitat K. Bandyopadhyay, M.-G. Lee, S.K. Panda, P. Saha, J. Lee, Int. J. Mech. Sci. 126, 203 (2017) K. Bandyopadhyay, M.-G. Lee, S.K. Panda, P. Saha, J. Lee, Int. J. Mech. Sci. 126, 203 (2017)
20.
Zurück zum Zitat A. Zamiri, F. Pourboghrat, F. Barlat, Int. J. Plast. 23, 1126 (2007) A. Zamiri, F. Pourboghrat, F. Barlat, Int. J. Plast. 23, 1126 (2007)
21.
Zurück zum Zitat H. Wang, M. Wan, X. Wu, Y. Yan, Comp. Mater. Sci. 47, 12 (2009) H. Wang, M. Wan, X. Wu, Y. Yan, Comp. Mater. Sci. 47, 12 (2009)
22.
Zurück zum Zitat J.H. Yoon, O. Cazacu, J. Whan Yoon, R.E. Dick, Int. J. Mech. Sci. 52, 1563 (2010) J.H. Yoon, O. Cazacu, J. Whan Yoon, R.E. Dick, Int. J. Mech. Sci. 52, 1563 (2010)
23.
Zurück zum Zitat M. Safaei, M.G. Lee, S. Zang, W.D. Waele, Comp. Mater. Sci. 81, 15 (2014) M. Safaei, M.G. Lee, S. Zang, W.D. Waele, Comp. Mater. Sci. 81, 15 (2014)
24.
Zurück zum Zitat K. Bandyopadhyay, S. Basak, K.S. Prasad, M.G. Lee, S.K. Panda, J. Lee, Int. J. Solids Struct. 156, 263 (2018) K. Bandyopadhyay, S. Basak, K.S. Prasad, M.G. Lee, S.K. Panda, J. Lee, Int. J. Solids Struct. 156, 263 (2018)
25.
Zurück zum Zitat Y. Yang, T. Balan, Int. J. Plast. 119, 331 (2019) Y. Yang, T. Balan, Int. J. Plast. 119, 331 (2019)
26.
Zurück zum Zitat F. Barlat, J.J. Gracio, M.G. Lee, E.F. Rauch, G. Vincze, Int. J. Plast. 27, 1309 (2011) F. Barlat, J.J. Gracio, M.G. Lee, E.F. Rauch, G. Vincze, Int. J. Plast. 27, 1309 (2011)
27.
Zurück zum Zitat F. Barlat, J. Ha, J.J. Grácio, M.G. Lee, E.F. Rauch, G. Vincze, Int. J. Plast. 46, 130 (2013) F. Barlat, J. Ha, J.J. Grácio, M.G. Lee, E.F. Rauch, G. Vincze, Int. J. Plast. 46, 130 (2013)
28.
Zurück zum Zitat F. Barlat, G. Vincze, J.J. Grácio, M.G. Lee, E.F. Rauch, C.N. Tomé, Int. J. Plast. 58, 201 (2014) F. Barlat, G. Vincze, J.J. Grácio, M.G. Lee, E.F. Rauch, C.N. Tomé, Int. J. Plast. 58, 201 (2014)
29.
Zurück zum Zitat T.B. Stoughton, Int. J. Mech. Sci. 42, 1 (2000) T.B. Stoughton, Int. J. Mech. Sci. 42, 1 (2000)
30.
Zurück zum Zitat M. Merklein, A. Kuppert, Int. J. Mater. Form. 2, 483 (2009) M. Merklein, A. Kuppert, Int. J. Mater. Form. 2, 483 (2009)
31.
Zurück zum Zitat F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, E. Chuet, Int. J. Plast. 19, 1297 (2003) F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, E. Chuet, Int. J. Plast. 19, 1297 (2003)
32.
Zurück zum Zitat D.G. Tari, M.J. Worswick, U. Ali, M.A. Gharghouri, Int. J. Plast. 55, 247 (2014) D.G. Tari, M.J. Worswick, U. Ali, M.A. Gharghouri, Int. J. Plast. 55, 247 (2014)
33.
Zurück zum Zitat S. Basak, S.K. Panda, Int. J. Mech. Sci. 151, 356 (2019) S. Basak, S.K. Panda, Int. J. Mech. Sci. 151, 356 (2019)
34.
Zurück zum Zitat K.S. Raghavan, Mater. Sci. Eng. A 26, 2075 (1995) K.S. Raghavan, Mater. Sci. Eng. A 26, 2075 (1995)
35.
Zurück zum Zitat S. Basak, S.K. Panda, Thin Wall. Struct. 126, 26 (2018) S. Basak, S.K. Panda, Thin Wall. Struct. 126, 26 (2018)
36.
Zurück zum Zitat F. Barlat, Mater. Sci. Eng. 91, 55 (1987) F. Barlat, Mater. Sci. Eng. 91, 55 (1987)
37.
Zurück zum Zitat J. Lee, H.J. Bong, D. Kim, Y.-S. Lee, Y. Choi, M.-G. Lee, Met. Mater. Int. 26, 682 (2020) J. Lee, H.J. Bong, D. Kim, Y.-S. Lee, Y. Choi, M.-G. Lee, Met. Mater. Int. 26, 682 (2020)
38.
Zurück zum Zitat H. Park, S.-J. Kim, J. Lee, J.H. Kim, D. Kim, Met. Mater. Int. 25, 1326 (2019) H. Park, S.-J. Kim, J. Lee, J.H. Kim, D. Kim, Met. Mater. Int. 25, 1326 (2019)
39.
Zurück zum Zitat K. Hariharan, N.T. Nguyen, F. Barlat, M.G. Lee, J.H. Kim, Mech. Res. Commun. 62, 5 (2014) K. Hariharan, N.T. Nguyen, F. Barlat, M.G. Lee, J.H. Kim, Mech. Res. Commun. 62, 5 (2014)
40.
Zurück zum Zitat S. Kim, J. Lee, F. Barlat, M.G. Lee, J. Mater. Process. Technol. 213, 1929 (2013) S. Kim, J. Lee, F. Barlat, M.G. Lee, J. Mater. Process. Technol. 213, 1929 (2013)
41.
Zurück zum Zitat H. Kim, J. Lee, F. Barlat, D. Kim, M.G. Lee, Acta Mater. 97, 435 (2015) H. Kim, J. Lee, F. Barlat, D. Kim, M.G. Lee, Acta Mater. 97, 435 (2015)
42.
Zurück zum Zitat Y. Jeong, T. Manninen, Met. Mater. Int. 25, 1548 (2019) Y. Jeong, T. Manninen, Met. Mater. Int. 25, 1548 (2019)
Metadaten
Titel
Influence of Evolution in Anisotropy During Strain Path Change on Failure Limits of Sheet Metals
verfasst von
Kaushik Bandyopadhyay
Shamik Basak
Hongjin Choi
Sushanta K. Panda
Myoung-Gyu Lee
Publikationsdatum
13.11.2020
Verlag
The Korean Institute of Metals and Materials
Erschienen in
Metals and Materials International / Ausgabe 9/2021
Print ISSN: 1598-9623
Elektronische ISSN: 2005-4149
DOI
https://doi.org/10.1007/s12540-020-00896-2

Weitere Artikel der Ausgabe 9/2021

Metals and Materials International 9/2021 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.