nach oben

Applied Composite Materials

Erschienen in:

17.07.2021

Influence of Geometric Parameters on Flatwise Compression Properties of a Novel Lattice Sandwich

verfasst von: Yang Liu, Mingxuan Li, Qingsheng Li, Xiaofeng Lu, Xiaolei Zhu

Erschienen in: Applied Composite Materials | Ausgabe 5/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Fiber reinforced composite lattice sandwich structures are lightweight attractive for their excellent mechanical properties. It is an ideal option for the bulkhead of the superstructure of a ship. In this paper, a new sandwich panel with an orthogonal corrugate lattice core was investigated experimentally, theoretically, and numerically. Its flatwise compression properties were tested. And the influence of the geometry of the lattice core was discussed. The results showed that local matrix compression damage and delamination caused by compression at the rib corner were an initial failure in compression. The final failure was rib fracture in the experiment. Simulated and predicted modulus matched the experiment well with relative errors of 14.61% and 10.03%, respectively. The compressive strength in the simulation was 2.86% higher than that in the experiment. Compression properties were linearly dependent on the relative density of the lattice core. The compressive modulus and strength were most sensitive to the radius of arc transition at the rib corner.

Vorheriger Artikel The Effect of Hydrothermal Aging on the Low-Velocity Impact Behavior of Multi-Walled Carbon Nanotubes Reinforced Carbon Fiber/Epoxy Composite Pipes

Nächster Artikel A Progressive Oxidative Damage Model of C/SiC Composites under Stressed Oxidation Environments

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Liu, H., Chen, L., Du, B., Peng, S., Guo, Y., Zhao, Y., et al.: Flatwise compression property of hierarchical thermoplastic composite square lattice. Compos. Struct. 210, 118–133 (2019). https://doi.org/10.1016/j.compstruct.2018.11.047

Wu, Q., Vaziri, A., Asl, M.E., Ghosh, R., Gao, Y., Wei, X., et al.: Lattice materials with pyramidal hierarchy: Systematic analysis and three dimensional failure mechanism maps. J. Mech. Phys. Solids 125, 112–144 (2019). https://doi.org/10.1016/j.jmps.2018.12.006

Haldar, A.K., Guan, Z.W., Cantwell, W.J., Wang, QY.: The compressive properties of sandwich structures based on an egg-box core design. Compos. Part B Eng. 144, 143–152 (2018). https://doi.org/10.1016/j.compositesb.2018.03.007

Morshedsoluk, F., Khedmati, MR.: Ultimate strength of composite ships’ hull girders in the presence of composite superstructures. Thin Wall Struct. 102, 122–138 (2016). https://doi.org/10.1016/j.tws.2016.01.024

Gargano, A., Pingkarawat, K., Blacklock, M., Pickerd, V., Mouritz, A.P.: Comparative assessment of the explosive blast performance of carbon and glass fibre-polymer composites used in naval ship structures. Compos. Struct. 171, 306–316 (2017). https://doi.org/10.1016/j.compstruct.2017.03.041

Vitale, J.P., Francucci, G., Xiong, J., Stocchi, A.: Failure mode maps of natural and synthetic fiber reinforced composite sandwich panels. Compos. A: Appl. Sci. Manuf. 94, 217–225 (2017). https://doi.org/10.1016/j.compositesa.2016.12.021

Zheng, T., Yan, H., Li, S., Cheng, Y., Zou, L., Hu, Y.: Compressive behavior and failure modes of the wood-based double X-type lattice sandwich structure. Journal of Building Engineering 30, 101176 (2020). https://doi.org/10.1016/j.jobe.2020.101176

Azzouz, L., Chen, Y., Zarrelli, M., Pearce, J. M., Mitchell, L., Ren, G., et al.: Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins. Compos. Struct. 213, 220–230 (2019). https://doi.org/10.1016/j.compstruct.2019.01.103

Liu, J., Li, C., Deng, S., Liu, J., Huang, W.: The edgewise compressive behavior and failure mechanism of the composite Y-frame core sandwich column. Polym. Test. 81, 106188 (2020). https://doi.org/10.1016/j.polymertesting.2019.106188

10.

Liu, J., Zhang, T., Jiang, W., Liu, J.: Mechanical response of a novel composite Y-frame core sandwich panel under shear loading. Compos. Struct. 224, 111064 (2019). https://doi.org/10.1016/j.compstruct.2019.111064

11.

Liu, J., He, Z., Liu, J., Huang, W.: Bending response and failure mechanism of composite sandwich panel with Y-frame core. Thin Wall Struct 145, 106387 (2019). https://doi.org/10.1016/j.tws.2019.106387

12.

Smardzewski, J., Wojciechowski, K.W.: Response of wood-based sandwich beams with three-dimensional lattice core. Compos. Struct. 216, 340–349 (2019). https://doi.org/10.1016/j.compstruct.2019.03.009

13.

Velea, M.N., Schneider, C., Lache, S.: Second order hierarchical sandwich structure made of self-reinforced polymers by means of a continuous folding process. Mater. Des. 102, 313–320 (2016). https://doi.org/10.1016/j.matdes.2016.04.049

14.

Xiong, J., Ma, L., Pan, S., Wu, L., Papadopoulos, J., Vaziri, A.: Shear and bending performance of carbon fiber composite sandwich panels with pyramidal truss cores. Acta Mater. 60(4), 1455–1466 (2012). https://doi.org/10.1016/j.actamat.2011.11.028

15.

Zhang, G., Ma, L., Wang, B., Wu, L.: Mechanical behaviour of CFRP sandwich structures with tetrahedral lattice truss cores. Compos. Part B Eng. 43(2), 471–476 (2012). https://doi.org/10.1016/j.compositesb.2011.11.017

16.

Zhang, X., Chen, J., Okabe, Y., Zhang, P., Xiong, X., Yu, X.: Influence of honeycomb dimensions and forming methods on the compressive properties of beetle elytron plates. J. Sandw. Struct. Mater. 22(1), 28–39 (2020). https://doi.org/10.1177/1099636217731993

17.

Chen, J., Zhang, X., Okabe, Y., Xie, J., Xu, M.: Beetle elytron plate and the synergistic mechanism of a trabecular-honeycomb core structure. Sci. China Technol. Sci. 62(1), 87–93 (2019). https://doi.org/10.1007/s11431-018-9290-1

18.

Codyre, L., Mak, K., Fam, A.: Flexural and axial behaviour of sandwich panels with bio-based flax fibre-reinforced polymer skins and various foam core densities. J. Sandw. Struct. Mater. 20(5), 595–616 (2018). https://doi.org/10.1177/1099636216667658

19.

Hu, Y., Li, W., An, X., Fan, H.: Fabrication and mechanical behaviors of corrugated lattice truss composite sandwich panels. Compos. Sci. Technol. 125, 114–122 (2016). https://doi.org/10.1016/j.compscitech.2016.02.003

20.

Sharaf, T., Fam, A.: Experimental investigation of large-scale cladding sandwich panels under out-of-plane transverse loading for building applications. J. Compos. Constr. 15(3), 422–430 (2011). https://doi.org/10.1061/(ASCE)CC.1943-5614.0000176

21.

Alfouneh, M., Ji, J., Luo, Q.: Optimal design of multi-cellular cores for sandwich panels under harmonic excitation. Compos. Struct. 248, 112507 (2020). https://doi.org/10.1016/j.compstruct.2020.112507

22.

Huo, X., Liu, H., Luo, Q., Sun, G., Li, Q.: On low-velocity impact response of foam-core sandwich panels. Int. J. Mech. Sci. 181, 105681 (2020). https://doi.org/10.1016/j.ijmecsci.2020.105681

23.

Zhang, X., Yu, X., Chen, J., Pan, L., Hu, L., Fu, Y.: Vibration properties and transverse shear characteristics of multibody molded beetle elytron plates. Sci. China Technol. Sci. 63(12), 2584 (2020). https://doi.org/10.1007/s11431-019-1570-6

24.

Cheng, Y., Zhou, T., Wang, H., Li, Y., Liu, J., Zhang, P.: Numerical investigation on the dynamic response of foam-filled corrugated core sandwich panels subjected to air blast loading. J. Sandw. Struct. Mater. 21(3), 838–864 (2019). https://doi.org/10.1177/1099636217700350

25.

Ha, N. S., Lu, G., Xiang, X.: Energy absorption of a bio-inspired honeycomb sandwich panel. J. Mater. Sci. 54(8), 6286–6300 (2019). https://doi.org/10.1007/s10853-018-3163-x

26.

Zamanifar, H., Sarrami-Foroushani, S., Azhari, M.: Static and dynamic analysis of corrugated-core sandwich plates using finite strip method. Eng. Struct. 183, 30–51 (2019). https://doi.org/10.1016/j.engstruct.2018.12.102

27.

Arunkumar, M. P., Pitchaimani, J., Gangadharan, K. V.: Bending and free vibration analysis of foam-filled truss core sandwich panel. J. Sandw. Struct. Mater. 20(5), 617–638 (2018). https://doi.org/10.1177/1099636216670612

28.

Shunmugasamy, V. C., Mansoor, B.: Aluminum foam sandwich with density-graded open-cell core: Compressive and flexural response. Mater. Sci. Eng. A 731, 220–230 (2018). https://doi.org/10.1016/j.msea.2018.06.048

29.

Rong, Y., Liu, J., Luo, W., He, W.: Effects of geometric configurations of corrugated cores on the local impact and planar compression of sandwich panels. Compos. Part B Eng. 152, 324–335 (2018). https://doi.org/10.1016/j.compositesb.2018.08.130

30.

Ferdous, W., Manalo, A., Aravinthan, T., Fam, A.: Flexural and shear behaviour of layered sandwich beams. Constr. Build. Mater. 173, 429–442 (2018). https://doi.org/10.1016/j.conbuildmat.2018.04.068

31.

Li, W., Sun, F., Wang, P., Fan, H., Fang, D.: A novel carbon fiber reinforced lattice truss sandwich cylinder: Fabrication and experiments. Compos. A: Appl. Sci. Manuf. 81, 313–322 (2016). https://doi.org/10.1016/j.compositesa.2015.11.034

32.

Hundley, J.M., Clough, E.C., Jacobsen, A.J.: The low velocity impact response of sandwich panels with lattice core reinforcement. Int. J. Impact. Eng. 84, 64–77 (2015). https://doi.org/10.1016/j.ijimpeng.2015.05.009

33.

Mathieson, H., Fam, A.: High cycle fatigue under reversed bending of sandwich panels with GFRP skins and polyurethane foam core. Compos. Struct. 113, 31–39 (2014). https://doi.org/10.1016/j.compstruct.2014.02.027

34.

Liu, Y., Zhou, C., Cen, B., Zeng, Z., Lu, X., Zhu, X.: Compression property of a novel lattice sandwich structure. Compos. Part B Eng. 117, 130–137 (2017). https://doi.org/10.1016/j.compositesb.2017.02.036

35.

Hashin, Z.: Failure Criteria for Unidirectional Fiber Composites. J. Appl. Mech. 47(2), 329–334 (1980)CrossRef

36.

Chang, F.K., Chang, K.Y.: A progressive damage model for laminated composites containing stress concentrations. J Compos Mater 21(3), 409–416 (1987)

37.

Russell, B., Deshpande, V., Wadley, H.: Quasistatic deformation and failure modes of composite square honeycombs. J. Mech. Mater. Struct. 3(7), 1315–1340 (2008). https://doi.org/10.2140/jomms.2008.3.1315

Titel: Influence of Geometric Parameters on Flatwise Compression Properties of a Novel Lattice Sandwich
verfasst von: Yang Liu
Mingxuan Li
Qingsheng Li
Xiaofeng Lu
Xiaolei Zhu
Publikationsdatum: 17.07.2021
Verlag: Springer Netherlands
Erschienen in: Applied Composite Materials / Ausgabe 5/2021
Print ISSN: 0929-189X
Elektronische ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-021-09918-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2021

Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review

Experimental and Numerical Studies on the Failure Mechanism of the Composite Scarf Joints with Bonding Flaws

Creep and Aging Evaluation of Phenol–Formaldehyde Carbon Fiber Composites in Overhead Transmission Lines

Experimental Characterization of Short Fiber-Reinforced Composites on the Mesoscale by Indentation Tests

Wide Scale Characterization and Modeling of the Vibration and Damping Behavior of CFRP-Elastomer-Metal Laminates—Comparison and Discussion of Different Test Setups

Microstructure and Damping Behavior of Continuous W-Core-SiC Fiber-Reinforced Aluminum Matrix Composites

Premium Partner

Marktübersichten