nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Introduction of Two Analytical Theories as Applied to Developable Surfaces

verfasst von : Marina Rynkovskaya

Erschienen in: Engineering Design Applications III

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, two analytical shell theories of linear elasticity which were suggested by Goldenweiser (Theory of elastic thin shells (1953) [2]) and Krivoshapko (Appl Mech Rev 51(12):731–746 (1998) [5]) are analyzed and applied to developable surfaces. The problem is discussed in an arbitrary system of curvilinear coordinates. It is shown in the paper that both theories are applicable for developable surfaces but can give different results for other types of surfaces. The particular differences in terms and determinations of two analytical theories are shown and discussed, and the limits of the technical theory are presented. Developable helicoid has been chosen as a test surface in order to investigate the differences in two theories. There are also some recommendations for the application of each of the theory to different types of surfaces.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel ATR-FTIR Analysis of Melamine Resin, Phenol-Formaldehyde Resin and Acrylonitrile-Butadiene Rubber Blend Modified by High-Energy Electron Beam Radiation

Nächstes Kapitel A Study of the Effect of the Quinacridone Pigment Content and Storage Time on the Process of Crystallization of Pre-oriented Polypropylene/Quinacridone Fibres

Altenbach, H., Eremeyev, V., Morozov, N.: On equations of the linear theory of shells with surface stresses taken into account. Mech. Solids 45(3), 331–342 (2010)CrossRef

Goldenweiser, A.L.: Theory of Elastic Thin Shells. Nauka, Moscow (1953)

Gotman, A.S.: Use of developable surfaces for designing well-stream shapes. Oceanic Eng. Int. 9(2), 81–96 (2005)

Konovalov, A.N.: Numerical methods in static problems of theory of elasticity. Siberian Math. J. 36(3), 491–505 (1995)MathSciNetCrossRef

Krivoshapko, S.N.: Static analysis of shells with developable middle surfaces. Appl. Mech. Rev. 51(12), 731–746 (1998)CrossRef

Krivoshapko, S.N.: Two types of governing equations for shells with the middle surfaces given in arbitrary curvilinear coordinates. Struct. Mech. Eng. Constr. Build. 1, 15–22 (2017)

Krivoshapko, S.N., Ivanov, V.N.: Encyclopedia of Analytical Surfaces. Springer (2015)

Krivoshapko, S.N., Rynkovskaya, M.: Five types of ruled helical surfaces for helical conveyers, support anchors and screws. MATEC Web Conf. 95, 06002 (2017)CrossRef

Liua, Y.J., Tangb, K., Gongc, W.Y., Wuc, T.R.: Industrial design using interpolatory discrete developable surfaces. Comp. Des. 43(9), 1089–1098 (2011)

10.

Mamieva, I.A.: Influence of the geometrical researches of ruled surfaces on design of unique structures. Struct. Mech. Eng. Constr. Build. 15(4), 299–307 (2019)CrossRef

11.

Oetter, R., Barry, C.D., Duffty, B., Welter, J.: Block construction of small ships and boats through use of developable panels. J. Ship Prod. 18(2), 65–72 (2002)

12.

Shevelev, L.P., Isaev, B.V.: Non-linear equations of a theory of thin shells given in arbitrary coordinates. VTUZ, Leningrad (1988)

13.

Solomon, J., Vouga, E., Wardetzky, M., Grinspun, E.: Flexible developable surfaces. Comp. Graph. Forum. 31(5), 1567–1576 (2012)CrossRef

14.

Zhilin, P.A.: Applied mechanics. Foundations of shells theory. Politechn Univ, Saint-Petersburg (2006)

Titel: Introduction of Two Analytical Theories as Applied to Developable Surfaces
verfasst von: Marina Rynkovskaya
Verlag: Springer International Publishing
Buch: Engineering Design Applications III
Print ISBN: 978-3-030-39061-7

Electronic ISBN: 978-3-030-39062-4

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-39062-4_25

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht