nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Rajkishore Nayak

Erschienen in: Polypropylene Nanofibers

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter discusses the scope of the study; research concepts and hypotheses; aims and objectives; and contribution of the research. In this study, nanofibres were fabricated by two melt processes: melt electrospinning and meltblowing. The nanofibres fabricated by these processes were characterised by various techniques to understand the fibre morphology, thermal, crystalline and mechanical properties.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Review of Literature: Melt Electrospinning

Radwan R (2007) Electron induced modifications in the optical properties of polypropylene. J Phys D Appl Phys 40:374CrossRef

Ziabicki A (1976) Fundamentals of fibre formation: the science of fibre spinning and drawing. Wiley, New York

Deitzel J, Kleinmeyer J, Harris D, Tan NB (2001) The effect of processing variables on the morphology of electrospun nanofibers and textiles. Polymer 42(1):261–272CrossRef

Ziabicki A (1976) Fundamentals of fiber formation: the science of fiber spinning and drawing. Wiley, New York

Dutton KC (2008) Overview and analysis of the meltblown process and parameters. J Text Appar Technol Manag 6(1):1–24

Ramakrishna S (2005) An introduction to electrospinning and nanofibers. World Scientific Pub Co Inc, Singapore

Huang Z, Zhang Y, Kotaki M, Ramakrishna S (2003) A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos Sci Technol 63(15):2223–2253CrossRef

Bhattarai S, Bhattarai N, Yi H, Hwang P, Cha D, Kim H (2004) Novel biodegradable electrospun membrane: scaffold for tissue engineering. Biomaterials 25(13):2595–2602CrossRef

Xu C, Inai R, Kotaki M, Ramakrishna S (2004) Aligned biodegradable nanofibrous structure: a potential scaffold for blood vessel engineering. Biomaterials 25(5):877–886CrossRef

10.

Bergshoef M, Vancso G (1999) Transparent nanocomposites with ultrathin, electrospun nylon-4, 6 fiber reinforcement. Adv mater 11(16):1362–1365CrossRef

11.

Zhou F, Gong R (2008) Manufacturing technologies of polymeric nanofibres and nanofibre yarns. Polym Int 57(6):837–845CrossRef

12.

Patanaik A, Anandjiwala R, Rengasamy R, Ghosh A, Pal H (2007) Nanotechnology in fibrous materials–a new perspective. Text Prog 39(2):67–120CrossRef

13.

Li D, Xia Y (2004) Electrospinning of nanofibers: reinventing the wheel? Adv Mater 16(14):1151–1170CrossRef

14.

Nayak R, Padhye R, Kyratzis IL, Truong YB, Arnold L (2012) Recent advances in nanofibre fabrication techniques. Text Res J 82(2):129–147

15.

Nayak R, Padhye R, Arnold L, Islam S (2011) Production of novel surfaces by electrospinning. Acta Univ Cibiniensis 58:128–138

16.

Nayak R, Kyratzis IL, Truong YB, Padhye R, Arnold L, Peeters G, Nichols L, O’Shea M (2012) Fabrication and characterisation of nanofibres by meltblowing and melt electrospinning. Adv Mater Res 472:1294–1299

17.

Cho D, Zhmayev E, Joo YL (2011) Structural studies of electrospun nylon 6 fibers from solution and melt. Polymer

18.

Ogata N, Shimada N, Yamaguchi S, Nakane K, Ogihara T (2007) Melt electrospinning of poly (ethylene terephthalate) and polyalirate. J Appl Polym Sci 105(3):1127–1132CrossRef

19.

Hutmacher DW, Dalton PD (2011) Melt electrospinning. Chem Asian J 6(1):44–56

20.

Dalton P, Klinkhammer K, Salber J, Klee D, Möller M (2006) Direct in vitro electrospinning with polymer melts. Biomacromolecules 7(3):686–690CrossRef

21.

Ogata N, Yamaguchi S, Shimada N, Lu G, Iwata T, Nakane K, Ogihara T (2007) Poly (lactide) nanofibers produced by a melt electrospinning system with a laser melting device. J Appl Polym Sci 104(3):1640–1645CrossRef

22.

Li F, Zhao Y, Wang S, Han D, Jiang L, Song Y (2009) Thermochromic core–shell nanofibers fabricated by melt coaxial electrospinning. J Appl Polym Sci 112(1):269–274CrossRef

23.

Zhmayev E, Zhou H, Joo YL (2008) Modeling of non-isothermal polymer jets in melt electrospinning. J Non-Newton Fluid Mech 153(2–3):95–108CrossRef

24.

Góra A, Sahay R, Thavasi V, Ramakrishna S (2011) Melt-electrospun fibers for advances in biomedical engineering, clean energy, filtration, and separation. Polym Rev 51(3):265–287CrossRef

25.

Zhou H, Green T, Joo Y (2006) The thermal effects on electrospinning of polylactic acid melts. Polymer 47(21):7497–7505CrossRef

26.

Ellison C, Phatak A, Giles D, Macosko C, Bates F (2007) Melt blown nanofibers: fiber diameter distributions and onset of fiber breakup. Polymer 48(11):3306–3316CrossRef

27.

Pinchuk LS (2002) Melt blowing: equipment, technology, and polymer fibrous materials. Verlag, Berlin

28.

Wang X, Ke Q (2006) Experimental investigation of adhesive meltblown web production using accessory air. Polym Eng Sci 46(1):1–7CrossRef

29.

Yu J, Fridrikh S, Rutledge G (2006) The role of elasticity in the formation of electrospun fibers. Polymer 47(13):4789–4797CrossRef

30.

Funada T, Joseph D (2003) Viscoelastic potential flow analysis of capillary instability. J Non-Newton Fluid Mech 111(2–3):87–105CrossRef

31.

McKee M, Park T, Unal S, Yilgor I, Long T (2005) Electrospinning of linear and highly branched segmented poly (urethane urea) s. Polymer 46(7):2011–2015CrossRef

32.

Marla V, Shambaugh R (2004) Ind Eng Chem Res 43:2793CrossRef

33.

Ellison CJ, Phatak A, Giles DW, Macosko CW, Bates FS (2007) Melt blown nanofibers: fiber diameter distributions and onset of fiber breakup. Polymer 48(11):3306–3316CrossRef

34.

Ellison CJ, Phatak A, Macosko CW, Bates FS (2007) Nanofiber production via melt blowing. Proceedings of 2007 AIChE Annual Meeting. Nov 7, 2007. Germany. Salt lake city, Utah

35.

Nayak R, Kyratzis IL, Truong YB, Padhye R, Arnold L, Peeters G, O’Shea M, Nichols L (2013) Fabrication and characterisation of polypropylene nanofibres by meltblowing process using different fluids. J Mater Sci 48(1):273–281

36.

Aymes-Chodur C, Betz N, Lengendre B, Yagoubi Y (2006) Polym degrad stab 91:649CrossRef

37.

Abdel-Hamid H (2005) Effect of electron beam irradiation on polypropylene films–dielectric and FT-IR studies. Solid-state Electron 49(7):1163–1167CrossRef

38.

Mishra R, Tripathy S, Sinha D, Dwivedi K, Ghosh S, Khathing D, Müller M, Fink D, Chung W (2000) Optical and electrical properties of some electron and proton irradiated polymers. Nucl Instrum Methods Phys Res Sect B Beam Interact Mater Atoms 168(1):59–64CrossRef

39.

Lee S, Kay Obendorf S (2006) Developing protective textile materials as barriers to liquid penetration using melt electrospinning. J Appl Polym Sci 102(4):3430–3437CrossRef

40.

Wang W, Tang L, Qu B (2003) Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite. Eur Polym J 39(11):2129–2134CrossRef

41.

Gahan R, Zguris GC (2000) A review of the melt blown process. IEEE 145–149

42.

McCulloch JG (1999) The history of the development of meltblowing technology. Int Nonwovens J 8:139–149

43.

Nayak R (2012) Fabrication and characterisation of polypropylene nanofibres by melt electrospinning and meltblowing. PhD Thesis, RMIT University, Melbourne

44.

Mascia L, Xanthos M (1992) An overview of additives and modifiers for polymer blends: Facts, deductions, and uncertainties. Adv Polym Technol 11(4):237–248CrossRef

45.

Yao L, Haas T, Guiseppi-Elie A, Bowlin G, Simpson D, Wnek G (2003) Electrospinning and stabilization of fully hydrolyzed poly (vinyl alcohol) fibers. Chem Mater 15(9):1860–1864CrossRef

46.

Lin T, Wang H, Wang X (2004) The charge effect of cationic surfactants on the elimination of fibre beads in the electrospinning of polystyrene. Nanotechnology 15:1375CrossRef

47.

Taipalus R, Harmia T, Zhang M, Friedrich K (2001) The electrical conductivity of carbon-fibre-reinforced polypropylene/polyaniline complex-blends: experimental characterisation and modelling. Compos Sci Technol 61(6):801–814CrossRef

48.

Watanabe K, Kim BS, Kim IS (2011) Development of Polypropylene Nanofiber Production System. Polym Rev 51(3):288–308CrossRef

49.

Nayak R, Padhye R, Kyratzis IL, Truong YB, Arnold L (2013) Effect of viscosity and electrical conductivity on the morphology and fibre diameter in melt electrospinning of polypropylene. Text Res J 83(6):606–617

50.

Kim B, Koncar V, Devaux E, Dufour C, Viallier P (2004) Electrical and morphological properties of PP and PET conductive polymer fibers. Synth Met 146(2):167–174CrossRef

Titel: Introduction
verfasst von: Rajkishore Nayak
Verlag: Springer International Publishing
Buch: Polypropylene Nanofibers
Print ISBN: 978-3-319-61457-1

Electronic ISBN: 978-3-319-61458-8

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-61458-8_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht