nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Dorian Marjanović, Mario Štorga, Stanko Škec

Erschienen in: Design Research: The Sociotechnical Aspects of Quality, Creativity, and Innovation

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Engineering design processes have undergone transformative changes over time, driven by a confluence of factors that have enhanced their efficacy and pertinence. This evolution is intricately tied to technological advancements, shifting societal needs and values. In response to the dynamic needs and perspectives within the industry, design research has evolved into a user-centred, data-driven, and socially responsible field closely aligned with technological advancements. This shift has led to fundamental principles in design research, emphasizing quality, innovation, and creativity. Initially confined to engineering design, the members of The Design Society broadened their research scope into trans-disciplinary realms, showcasing the interdisciplinary nature of modern design research. This transformation was evident in a workshop in Zagreb, where participants reflected on the triad of quality, creativity, and innovation in design research. The introduction chapter of this book sets a scene, bringing a brief overview of the developments through time.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel From Design Optimization to Design Science: An Evolution in Design Thinking

Albers, A., Alink, T., Thau, S., Matthiesen, S. (2008). Support of system analyses and improvement in industrial design through the contact and channel model. In: Marjanović, D. Štorga, M. Pavković, N. & Bojčetić, N. (eds.). Proceedings of the DESIGN 2008, 10th International Design Conference, University of Zagreb, Zagreb.

Alger, J. R. M., & Hays, C. V. (1964). Creative Synthesis in Design. Prentice Hall.

Amaresh, C. A., & Lindemann, U. (2015). Impact of design research on industrial practice tools. Technology, and Training, Springer Cham. https://doi.org/10.1007/978-3-319-19449-3CrossRef

Andreasen M. M., & McAloone T. C. (2008). Applications of the Theory of Technical Systems—Experiences From the “Copenhagen School, AEDS (Workshop, Pilsen).

Andreasen, M. M., Howard, T.J., & Lomholt Brun, H. P. (2014). Domain theory, its models and concepts in A. In: Chakrabarti, L. T. M. Blessing (eds.), An Anthology of Theoriesand Models of Design. https://doi.org/10.1007/978-1-4471-6338-1_9 Springer-verlag, London

Andreasen, M. M. (2011). 45 Years with design methodology. Journal of Engineering Design, 22(5)

Archer, L. B. (1954) Artist versus engineer. Design, 67, 13–16.

Archer, L. B. (1963d). Systematic method for designers: Part four: Examining the evidence. Design, 179, 68–72.

Archer, L. B. (1963a). Systematic method for designers: Part one: Aesthetics and logic. Design, 172, 46–49.

Archer, L. B. (1963c). Systematic method for designers: Part three: getting the brief. Design, 176, 52–57.

Archer, L. B. (1963b). Systematic method for designers: Part two: Design and system. Design, 174, 70–74.

Archer, L. B. (1964a). Systematic method for designers: Part five: the creative leap. Design, 181, 50–52.

Archer, L. B. (1964b). Systematic method for designers: Part six: The donkey work. Design, 185, 60–63.

Archer, L. B. (1964c). Systematic method for designers: Part seven: The final steps. Design, 188, 56–59.

Archer, L. B. (1981). A View of the Nature of the Design Research in Design: Science: Method. In: R. Jacques, J. A. Powell (eds.), Guilford, Surrey: IPC Business Press Ltd.

Asimov, M. (1962). Introduction to design. Englewood Cliffs, New York, Prentice Hall

Bayazit, N. (2004). Investigating design: a review of forty years of design research. Design Issues, 20(1), pp 16-29), MIT. https://doi.org/10.1162/074793604772933739

Birkhofer, H. (2011). The Future of Design Methodology. Springer-Verlag London Limited. https://doi.org/10.1007/978-0-85729-615-3

Bischoff, W., & Hansen, F. (1953). Rationelles Konstruieren Konstruktionsbücher. Bd. 5. Berlin: VEBVerlag Technik.

Blessing, L. T. M. (2002). What is this thing called design research? Annals of the (2002 international CIRP Design Seminar, Hong Kong, 16–18 May, pp. 1–6.

Boyd Davis, S., & Gristwood, S. (2016). The structure of design processes: Ideal and Reality in Bruce Archer’s (1968 Doctoral Thesis. In Proceedings of DRS 2016, Design Research Society 50th Anniversary Conference. Brighton, UK.

Brown, T. (2008). Design thinking. Harvard Business Review, 86, 84–92.

Cash, P. (2020). Where next for design research? Understanding Research Impact and Theory Building, Design Studies, 68, 113–141. https://doi.org/10.1016/j.destud.2020.03.001CrossRef

Chakrabarti, A., & Blessing, L. T. M. (eds.). (2014). An Anthology of Theories and Models of Design, Philosophy, Approaches and Empirical Explorations. Springer. https://doi.org/10.1007/978-1-4471-6338-1

Cross, N. (2006). Designerly Ways of knowing. Springer-Verlag.

Cross, N. (1993). A history of design methodology. In: M. J. de Vries et aL (eds.), Design Methcdology and Relationships with Science, (pp. 15–27). Kluwer Academic Publishers.

Culley, S. J., Allen, R. D., & Hicks, B. J. (2002). Informal information in engineering design—a classification. In Proceedings of DESIGN (2002, the 7th International Design Conference, Dubrovnik.

Culley, S. J. (2014). Revisiting design as an information processing activity. In: A. Chakrabarti, L. T. M. Blessing (eds.), An Anthology of Theories and Models of Design. https://doi.org/10.1007/978-1-4471-6338-1_18. Springer-Verlag London.

Dixon, J. R. (1966). Design Engineering: Invetiviness, Analysys and Decision Making. New York McGraw-Hill.

Ehrlenspiel, K. (1985). Kostengünstig Konstruiren. Springer.CrossRef

Erkens, A. (1928). Beiträge Zur Konstruktionserziehung. z. VDI, 72(1928), 17–21.

Farzaneh, H. H., Lindemann, U. (2018). A Practical Guide to Bio-inspired Design. Springer. https://doi.org/10.1007/978-3-662-57684-7

Feilden, G. B. R. (1963). Engineering design: report of a committee appointed by the council for scientific and industrial research to consider the present standing of mechanical engineering design. By Council for Scientific and Industrial Research (Great Britain).

Finger, S., & Dixon, J. R. (1989). A review of research in mechanical engineering design. Part II: Representations, analysis, and design for the life cycle. Research in Engineering Design, 1, 121–137 (1989) https://doi.org/10.1007/BF01580205

Finger, S., & Dixon, J. R. (1989a). A review of research in mechanical engineering design. part I: descriptive, prescriptive, and computer-based models of design processes. Research in Engineering Design, 1, 51–67. https://doi.org/10.1007/BF01580003CrossRef

French, M. J. (1985). Conceptual Design for Engineers. Springer, Berlin/Heidelberg u. Design Council, London

Friedman, K. (2003). Theory construction in design research: criteria: approaches, and methods. Design Studies, 24, 507e522.

Gericke, K., & Blessing, L. (2012). An analysis of design process models across disciplines. In: Marjanović, D. Štorga, M. Pavković, N. & Bojčetić, N. (eds.). Proceedings of the DESIGN 2012, 12th International Design Conference, University of Zagreb, Zagreb.

Gero, J. (1990). Design prototypes: A knowledge representation schema for design. AI Magazine, 11, 26–36.

Glegg, G. L. (1973). The Science of Design. Cambridge University Press.CrossRef

Gordon, W. J. J. (1961). Synectics: The development of creative capacity. Collier, New York.

Hales, C. (2005). Adding value to design research. In: Clarkson, J. & Huhtala, M. (eds.), Engineering Design Theory and Practice. EDC University of Cambridge.

Hansen, F. (1966). (1966) Konstruktionssystematik. VEB Verlag Technik.

Hansen, F. (1974). Konstruktionswissenschaft—Grundlagen und Methoden, München. Hanser.

Hatchuel, A., & Weil, B. (2003). A New Approach of Innovative Design: An Introduction to C-K Theory. In: Norell, M. (ed.), International Conference on Engineering Design (ICED’03), Stockholm, Sweden.

Horváth, I. (2004). A treatise on order in engineering design research. Research in Engineering Design, 15, 155–181.CrossRef

Howard, T. J., Culley, S. J., & Dekoninck, E. A. (2008). Describing the creative design process by the integration of engineering design and cognitive psychology literature. Design Studies, 29(2), 160–180. https://doi.org/10.1016/j.destud.2008.01.001CrossRef

Howard, T. J., Culley, S. J., & Dekoninck, E. A. (2010). Describing the creative design process by the integration of engineering design and cognitive psychology literature. Design Studies, 29(2), 160–180. https://doi.org/10.1016/j.destud.2008.01.001CrossRef

Hubka, V. (1974). Theorie der Maschinesysteme. Springer-Verlag.

Hubka, V. (1980). Allgemeines Vogehensmodell des Konstruirens. Fachpresse Goldach.

Hubka, V. (1982). Principles of Engineering Design. Butterworth Scientific Press.

Hubka, V., & Eder, E. (1987). A Scientific approach to engineering design. Design Studies, 8(3), 123–137.CrossRef

Hubka, V., & Eder, E. (1988). Theory of Technical Systems: A Total Concept Theory for Engineering Design. Springer.CrossRef

Hubka, V., & Eder, E. (1992). Priniciples of Engineering Design—General Procedural Model of Engineering Design. London: Butterworth & Co. (1982. (reprinted in WDK series by Heurista, (1988).

Hubka, V., & Eder, E. (1996). Design Science. Springer Verlag.

Hubka, V. (1983). J. Dietrich zum Konstruieren Grundlegende Gedanken, Schriftereihe WDK 9, Heurista, Zurich.

Jones, J. C., & Thornley, D. G. (Eds.). (1963). Conference on Design Methods. UK, Pergamon Press.

Jones, J. C. (1966). Design methods compared 1: strategies. Design, 212, 32–35.

Keates, S., & Clarkson, P. J. (2003). Countering Design Exclusion: An Introduction to Inclusive Design. Springer. https://doi.org/10.1007/978-1-4471-0013-3

Kesselring, F. (1942). Die starke Konstruktion. VDI-Z. 86 pp. 321–330, 749–752.

Kesselring, F. (1951). Bewertung von Konstruktionen. VDI-Verlag.

Kesselring, F. (1954b). Technische Kompositionslehre. Springer.CrossRef

Kesselring, F. (1955). Morpfologisch-analytische Konstruktionsmethode. VDI-Z, 97, 327.

Kesselring, F. (1954). Technische Kompositionslehre. Berlin Göttingen. Heidelberg, Springer.

Koller, R. (1985). Konstruktionslehre für den Maschinenbau. Springer, Berlin/Heidelberg.

Krause, D., Heyden, E. (eds.). (2022). Design Methodology for Future Products—Data Driven, Agile and Flexible. Springer. https://doi.org/10.1007/978-3-030-78368-6

Kroes, P., Vermaas, P. E., Light, A., & Moore, S.A. (2008). Design in Engineering and architecture: towards an integrated philosophical understanding. In: Philosophy and Design. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-6591-0_1

Lindemann, U. (2006). Methodische Entwicklung technischer Produkte: Methoden flexibel und situationsgerecht anwenden. Springer.

Lindemann, U. (2009). Structural Complexity Management. Springer.CrossRef

Lindemann, U. (1998). Human Behaviour in Design Individuals, Teams, Tools.

Lloyd, P., & Bohemia, E. (eds.). (2016). In: Proceedings of DRS2016: Design + Research + Society—Future-Focused Thinking, Vol. 1–10, DRS. https://www.drs2016.org/ddr8

Marjanović, D. (1996). Design process representation for the development of an ICAD system”. AUTOMATIKA, 37(3–4), 127–132.

Marjanović, D., & Pavković, N. (1995). The Structure of an ICAE System, International conference on engineering design—ICED 95, Prague.

Matousek, R. (1957). Konstruktionslehre des allgemeinen Maschinenbaus. Springer, Berlin.

McMahon, C., Giess, M., & Culley, S. (2005). Information management for through life product support: the curation of digital engineering dana. International Journal of Product Lifecycle Management 1(1): 1743–5129 ISSN (online).

Niemann, G. (1975). Maschinenelemente, Bd. 1. Berlin: Springer 1. Aufl. (1950), 2. Aufl. (1965), 3. Aufl. (1975) (unter Mitwirkung von M. Hirt).

Olesen, J. (1992). Concurrent Development In Manufacturing—Based Upon Dispositional Mechanisms. Dissertation, Technical University of Denmark.

Osborne, A. F. (1963). Applied Imagination—Principles and Procedure of Creative Thinking. Scribners, New York.

Pahl, G., & Beitz, W. (1977). Konstruktionslehre. Springer-Verlag.CrossRef

Pahl, G., Beitz, W., Feldhausen, J., & Grote, K. H. (2007). Engineering Design: A Systematic Approach. Springer.CrossRef

Pahl, G., & Beitz, W. (1984). Engineering Design. In: Wallace, K.M. (ed.)(1st edn), The Design Council, London.

Papalambros, P. (2015). Design science: why, what and how. Design Science, 1, E1. https://doi.org/10.1017/dsj.2015.1CrossRef

Petric Maretic, H. (2014). Dynamic Network Analysis—Evolution of the Research Field Based on the Papers Published at the International DESIGN Conference 2002–2014 (in Croatian) URL: https://cadlab.fsb.hr/en/education/projects/dynamic-network-analysis-evolution-of-the-research-field-based-on-the-papers-published-at-the-international-design-conference-2002-2014-5

Ponn, J., & Lindeman, U. (2011). Konzeptentwicklung und Gestaltung technischer Produkte Systematisch von Anforderungen zu Konzepten und Gestaltlösungen. Springer.CrossRef

Reuleaux, F. (1861). Der Constructeur. Vieweg.

Reuleaux, F. (1875). Theoretiche Kinematik, Braunschweig, Vieweg, (1875/1900).

Reuleaux, F. (1891). Technology and Civilization, From the Smithsonian report for 1890. Washington, Gov. Printing office.

Rodenacker, W.G.; Claussen, U. (1973). Regeln des Methodischen Konstruierens/T. 1. Regeln 1 bis 4. Mainz: Krausskopf.

Rodenacker, W.G., Claussen, U. (1975). Regeln des Methodischen Konstruierens/Regeln 5 bis 8. Mainz: Krausskopf.

Rodenacker, W.G. (1970). Methodisches Konstruieren. Konstruktionsbücher, Bd. 27. Berlin: Springer.

Roozenburg, N. F. M., Eekels, J. (1995). Product Design: Fundamentals and Methods. Wiley, Chichester.

Roth, K. (1982). Konstruieren mit Konstruktionskatalogen. Springer, Berlin/Heidelberg.

Simon, H.A. (1969). The Sciences of the Artificial. The MIT Presss.

Suh, N.P. (2001). Axiomatic Design. Oxford University Press.

Tjalve, E. (1976). A short course in industrial design. Newnes-Butterworths.

Tomiyama, T. & Yoshikawa, H. (1986). Extended general design theory. Technical Report CS-R8604, Centre For Mathematics and Computer Science, Amsterdam.

Ulrich, K.T., & Eppinger, S.D. (2004). Product design and development. McGraw-Hill/Irwin.

Wallace, K., & Blessing, L. (2000). Observations on some German contributions to engineering design in memory of professor Wolfgang Beitz. Research in Engineering Design, 12, 2–7. https://doi.org/10.1007/s001630050019CrossRef

Weber, C., Birkhofer, H. (2007). Today’s Requirements on engineering design science. In: Proceedings of ICED 07:785–786 (Exec. Summary), Paper-no. 511 (Full Paper, CD-ROM), École Centrale Paris.

Weber, C. (2005). CPM/PDD—an extended theoretical approach to modelling products and product development processes. In: Proceedings of the 2nd German-Israeli Symposium on Advances in Methods and Systems for Development of Products and Processes, pp. 159–179. Berlin, Germany, Fraunhofer-IRB-Verlag, Stuttgart.

Weber, C. (2008). How to derive application-specific design methodologies. In: Proceedings of DESIGN, vol. 1, pp. 69–80, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb

Wögerbauer, H. (1943). Die Technik des Konstruierens (2nd ed.). Oldenbourg.CrossRef

Yoshikawa, T. (1981). General Design Theory and a CAD system. In: Sata, T. and Warman, E. (eds). Man-Machine Communication in CAD/CAM, Proceedings of The IFIP WG5.2–5.3 Working Conference (1980), pp. 35–37. North-Holland, Amsterdam.

Zwicky, F. (1966). Entdecken. Forschen im Morphologischen Weltbild, München/Zürich, Droemer Knaur Verlag.

Titel: Introduction
verfasst von: Dorian Marjanović
Mario Štorga
Stanko Škec
Verlag: Springer International Publishing
Buch: Design Research: The Sociotechnical Aspects of Quality, Creativity, and Innovation
Print ISBN: 978-3-031-50487-7

Electronic ISBN: 978-3-031-50488-4

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-3-031-50488-4_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht