nach oben

Erschienen in:

2015 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Sheng-Qi Yang

Erschienen in: Strength Failure and Crack Evolution Behavior of Rock Materials Containing Pre-existing Fissures

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Rock is a complicated geological medium that usually contains all kinds of fissures with unequal scales. Under an applied load, new cracks are readily initiated at the tips of nearby pre-existing fissures, and these new cracks propagate along the direction of axial stress in the rock (Li et al. in Int. J. Solids Struct 42:2505–2516, 2005; Wong and Einstein in Rock Mech Rock Eng 42(3):475–511, 2009a; Wong and Einstein in Int J Rock Mech Min Sci 46(2):239–249, 2009b; Park and Bobet in Int J Rock Mech Min Sci 46(5):819–829, 2009; Yang and Jing in Int J Fract 168(2):227–250, 2011), resulting in an unstable failure due to crack initiation, propagation, and coalescence.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Experimental Investigation on Strength Failure and Crack Evolution Behavior of Brittle Sandstone Containing a Single Fissure

Baud P, Zhu W, Wong TF (2000) Failure mode and weakening effect of water on sandstone. J Geophys Res 105:16371–16389CrossRef

Bobet A (1997) Fracture coalescence in rock materials: experimental observations and numerical predictions. Sc.D. Thesis, MIT, Cambridge, USA

Bobet A, Einstein HH (1998) Fracture coalescence in rock-type materials under uniaxial and biaxial compression. Int J Rock Mech Min Sci 35:863–889CrossRef

Camborde F, Mariotti C, Donze FV (2000) Numerical study of rock and concrete behavior by discrete element modelling. Comput Geotech 27:225–247CrossRef

Chen Xin, Liao Zhihong, Peng Xi (2012) Deformability characteristics of jointed rock masses under uniaxial compression. Int J Min Sci Technol 22:213–221CrossRef

Chen CS, Pan E, Amadei B (1998) Fracture mechanics analysis of cracked discs of anisotropic rock using the boundary element method. Int J Rock Mech Min Sci 35(2):195–218CrossRef

Colombo D, Massin P (2011) Fast and robust level set update for 3D non-planar X-FEM crack propagation modeling. Comput Methods Appl Mech Eng 200(25–28):2160–2180CrossRef

Chang SH, Lee CI (2004) Estimation of cracking and damage mechanisms in rock under triaxial compression by moment tensor analysis of acoustic emission. Int J Rock Mech Min Sci 41:1069–1086

Debecker B, Vervoort A (2009) Experimental observation of fracture patterns in layered slate. Int J Fract 159:51–62CrossRef

Eberhardt E, Stimpson B, Stead D (1999) Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures. Rock Mech Rock Eng 32(2):81–99CrossRef

Esterhuizen GS, Dolinar DR, Ellenberger JL (2011) Pillar strength in underground stone mines in the United States. Int J Rock Mech Min Sci 48:42–50CrossRef

Feng XT, Pan PZ, Zhou H (2006) Simulation of the rock microfracturing process under uniaxial compression using an elasto-plastic cellular automaton. Int J Rock Mech Min Sci 43(7):1091–1108CrossRef

Fujii Y, Ishijima Y (2004) Consideration of fracture growth from an inclined slit and inclined initial fracture at the surface of rock and mortar in compression. Int J Rock Mech Min Sci 41:1035–1041CrossRef

Ganne P, Vervoort A (2007) Effect of stress path on pre-peak damage in rock induced by macro-compressive and—tensile stress fields. Int J Fract 144(2):77–89CrossRef

Germanovich LN, Dyskin AV (2000) Fracture mechanisms and instability of openings in compression. Int J Rock Mech Min Sci 37:263–284CrossRef

Gregoire D, Maigre H, Rethore J, Combescure A (2007) Dynamic crack propagation under mixed-mode loading—comparison between experiments and X-FEM simulations. Int J Solids Struct 44(20):6517–6534CrossRef

Ghazvinian A, Sarfarazi V, Schubert W (2012) A study of the failure mechanism of planar non-persistent open joints using PFC2D. Rock Mech Rock Eng 45:677–693CrossRef

Hall SA, Sanctis F, Viggiani G (2006) Monitoring fracture propagation in a soft rock (Neapolitan Tuff) using acoustic emissions and digital images. Pure appl Geophys 163:2171–2204CrossRef

Huang ML, Wong RHC (2007) Experimental study on propagation and coalescence mechanisms of 3D surface cracks. Chin J Rock Mech Eng 26:1794–1799

Heap MJ, Baud P, Meredith PG, Bell AF, Main IG (2009) Time-dependent brittle creep in Darley Dale sandstone. J Geophys Res 114:B07203. doi:10.1029/2008JB006212

Hoek E (1998) Practical rock engineering. Department of Civil Engineering, University of Toronto, Rocscience Inc., Toronto

Jouniaux L, Masuda K, Lei X et al (2001) Comparison of themicrofracture localization in granite between fracturation and slip of a preexisting macroscopic healed joint by acoustic emission measurements. J Geophys Res 106(B5):8687–8698CrossRef

Khan AS, Xiang Y, Huang SJ (1991) Behavior of Berea sandstone under confining pressure part I: yield and failure surfaces, and nonlinear elastic response. Int J Plast 7:607–624CrossRef

Khan AS, Xiang Y, Huang SJ (1992) Behavior of Berea sandstone under confining pressure part II: elastic-plastic response. Int J Plast 8:209–220CrossRef

Labuz JF, Cattaneo S, Chen L-H (2001) Acoustic emission at failure in quasi-brittle materials. Constr Build Mater 15:225–233CrossRef

Lee H, Jeon S (2011) An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression. Int J Solids Struct 48(6):979–999CrossRef

Lei XL, Masuda K, Nishizawa O et al (2004) Detailed analysis of acoustic emission activity during catastrophic fracture of faults in rock. J Struct Geol 26:247–258CrossRef

Li YP, Chen LZ, Wang YH (2005) Experimental research on pre-cracked marble under compression. Int J Solids Struct 42:2505–2516CrossRef

Mughieda O, Omar MT (2008) Stress analysis for rock mass failure with offset joints. Geotech Geol Eng 2008(26):543–552CrossRef

Manouchehrian A, Marji MF (2012) Numerical analysis of confinement effect on crack propagation mechanism from a flaw in a pre-cracked rock under compression. Acta Mech. Sinica 28(5):1389–1397CrossRef

Manouchehrian A, Sharifzadeh M, Marji MF, Gholamnejad J (2014) A bonded particle model for analysis of the flaw orientation effect on crack propagation mechanism in brittle materials under compression. Arch Civ Mech Eng 14(1):40–52CrossRef

Moradian ZA, Ballivy G, Rivard P, Gravel C, Rousseau B (2010) Evaluating damage during shear tests of rock joints using acoustic emissions. Int J Rock Mech Min Sci 47(4):590–598CrossRef

Nemat-Nasser S, Horii H (1982) Compression-induced nonlinear crack extension with application to splitting, exfoliation, and rockburst. J Geophys Res 87(B8):6805–6821CrossRef

Prudencio M, Van Sint Jan M (2007) Strength and failure modes of rock mass models with non-persistent joints. Int J Rock Mech Min Sci 34:1165–1186

Park CH, Bobet A (2009) Crack coalescence in specimens with open and closed flaws: a comparison. Int J Rock Mech Min Sci 46(5):819–829CrossRef

Pan PZ, Feng XT, Hudson JA (2009) Study of failure and scale effects in rocks under uniaxial compression using 3D cellular automata. Int J Rock Mech Min Sci 46(4):674–685CrossRef

Potyondy DO, Cundall PA (1998) Modeling notch-formation mechanisms in the URL mine-by test tunnel using bonded assemblies of circular particles. Int J Rock Mech Min Sci Geomech Abstr 35:510–511CrossRef

Pestman BJ, Van Munster JG (1996) An acoustic emission study of damage development and stress-memory effects in sandstone. Int J RockMech Min Sci Geomech Abstr 33(6):585–593CrossRef

Rozycki P, Moes N, Bechet E, Dubois C (2008) X-FEM explicit dynamics for constant strain elements to alleviate mesh constraints on internal or external boundaries. Comput Methods Appl Mech Eng 197(5):349–363CrossRef

Sagong M, Bobet A (2002) Coalescence of multiple flaws in a rock-model material in uniaxial compression. Int J Rock Mech Min Sci 39:229–241CrossRef

Song HP, Zhang H, Kang YL, Huang GY, Fu DH, Qu CY (2013) Damage evolution study of sandstone by cyclic uniaxial test and digital image correlation. Tectonophysics 608:1343–1348CrossRef

Spicak A, Locajicek T (1986) Fault interaction and seismicity: laboratory investigation and its seismotectonic interpretation. Pure appl Geophys 124:857–874CrossRef

Shen B, Stephansson O (1993) Numerical analysis of mixed mode I and Mode II fracture propagation. Int J Rock Mech Min Sci Geomech Abstr 30(7):861–867

Shen B (1995) The mechanism of fracture coalescence in compression—experimental study and numerical simulation. Eng Fract Mech 51(1):73–85CrossRef

Scholtes L, Donze FV (2013) A DEM model for soft and hard rocks: role of grain interlocking on strength. J Mech Phys Solids 61(2):352–369CrossRef

Schopfer MPJ, Childs C (2013) The orientation and dilatancy of shear bands in a bonded particle model for rock. Int J Rock Mech Min Sci 57:75–88

Shimizu H, Koyama T, Ishida T, Chijimatsu M, Fujita T, Nakama S (2010) Distinct element analysis for class II behavior of rocks under uniaxial compression. Int J Rock Mech Min Sci 47:323–333CrossRef

Tang CA, Kou SQ (1998) Crack propagation and coalescence in brittle materials under compression. Eng Fract Mech 61:311–324CrossRef

Tang CA, Liu H, Lee PKK, Tsui Y, Tham LG (2000) Numerical studies of the influence of microstructure on rock failure in uniaxial compression part II: constraint, slenderness and size effect. Int J Rock Mech Min Sci 37(4):571–583CrossRef

Tang CA, Lin P, Wong RHC, Chau KT (2001) Analysis of crack coalescence in rock-like materials containing three flaws—part II: numerical approach. Int J Rock Mech Min Sci 38:925–939CrossRef

Tham LG, Liu H, Tang CA et al (2005) On tension failure of 2-D rock specimens and associated acoustic emission. Rock Mech Rock Eng 38(1):1–19CrossRef

Vásárhelyi B, Bobet A (2000) Modeling of crack initiation, propagation and coalescence in uniaxial compression. Rock Mech Rock Eng 33(2):119–139CrossRef

Van De Steen B, Vervoort A, Napier JAL (2005) Observed and simulated fracture pattern in diametrically loaded discs of rock material. Int J Fract 131:35–52CrossRef

Vorobiev O (2008) Generic strength model for dry jointed rock masses. Int J Plast 24:2221–2247CrossRef

Wassermann J, Senfaute G, Amitrano D et al (2009) Evidence of dilatant and non-dilatant damage processes in oolitic iron ore: P-wave velocity and acoustic emission analyses. Geophys J Int 177(3):1343–1356CrossRef

Wasantha PLP, Ranjith PG (2014) Water-weakening behavior of hawkesbury sandstone in brittle regime. Eng Geol 178:91–101CrossRef

Wong LNY, Einstein HH (2009a) Crack coalescence in molded gypsum and Carrara marble: part 1. macroscopic observations and interpretation. Rock Mech Rock Eng 42(3):475–511CrossRef

Wong LNY, Einstein HH (2009b) Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression. Int J Rock Mech Min Sci 46(2):239–249CrossRef

Wong RHC, Chau KT, Tang CA, Lin P (2001) Analysis of crack coalescence in rock-like materials containing three flaws-part I: experimental approach. Int J Rock Mech Min Sci 38:909–924CrossRef

Wong RHC, Chau KT (1998) Crack coalescence in a rock-like material containing two cracks. Int J Rock Mech Min Sci 35:147–164CrossRef

Wong TF, David C, Zhu W (1997) The transition from brittle faulting to cataclastic flow in porous sandstones: mechanical deformation. J Geophys Res 102(B2):3009–3025CrossRef

Yang SQ, Jing HW (2011) Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression. Int J Fract 168(2):227–250CrossRef

Yang SQ (2011) Crack coalescence behavior of brittle sandstone samples containing two coplanar fissures in the process of deformation failure. Eng Fract Mech 78:3059–3081CrossRef

Yang SQ, Jiang YZ, Xu WY, Chen XQ (2008) Experimental investigation on strength and failure behavior of pre-cracked marble under conventional triaxial compression. Int J Solids Struct 45:4796–4819CrossRef

Yang SQ, Yang DS, Jing HW, Li YH, Wang SY (2012) An experimental study of the fracture coalescence behaviour of brittle sandstone specimens containing three fissures. Rock Mech Rock Eng 45(4):563–582CrossRef

Yang SQ, Liu XR, Jing HW (2013) Experimental investigation on fracture coalescence behavior of red sandstone containing two unparallel fissures under uniaxial compression. Int J Rock Mech Min Sci 63:82–92

Yang SQ, Huang YH, Jing HW, Liu XR (2014a) Discrete element modeling on fracture coalescence behavior of red sandstone containing two unparallel fissures under uniaxial compression. Eng Geol 178:28–48CrossRef

Yang SQ, Jing HW, Cheng L (2014b) Influences of pore pressure on short-term and creep mechanical behavior of red sandstone. Eng Geol 179:10–23CrossRef

Yang SQ, Jing HW, Huang YH, Ranjith PG, Jiao YY (2014c) Fracture mechanical behavior of red sandstone containing a single fissure and two parallel fissures after exposure to different high temperature treatments. J Struct Geol 69(Part A):245–264

Yuan SC, Harrison JP (2006) A review of the state of the art in modelling progressive mechanical breakdown and associated fluid flow in intact heterogeneous rocks. Int J Rock Mech Min Sci 43:1001–1022CrossRef

Yoon J (2007) Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation. Int J Rock Mech Min Sci 44:871–889CrossRef

Yoon JS, Zang A, Stephansson O (2012) Simulating fracture and friction of Aue granite under confined asymmetric compressive test using clumped particle model. Int J Rock Mech Min Sci 49:68–83CrossRef

Zhang XP, Wong LNY (2012) Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach. Rock Mech Rock Eng 45:711–737

Zhao YH, Liang XF (2004) Testing study on crack development in limestone plate specimen under uniaxial compression. Chin J Rock Mech Eng 23:1608–1615 (in Chinese)

Zhao YH, Yang ZT (2005) Research on fracturing around cemented slot in rock specimen. Chin J Rock Mech Eng 24:2350–2356 (in Chinese)

Zhu WS, Chen WZ, Shen J (1998) Simulation experiment and fracture mechanism study on propagation of Echelon pattern cracks. Acta Mech Solida Sin 19:355–360 (in Chinese)CrossRef

Zhou XP, Chen H, Feng YF (2014) An experimental study of crack coalescence behavior in rock-like materials containing multiple flaws under uniaxial compression. Rock Mech Rock Eng 47(6):1961–1986CrossRef

Titel: Introduction
verfasst von: Sheng-Qi Yang
Verlag: Springer Berlin Heidelberg
Buch: Strength Failure and Crack Evolution Behavior of Rock Materials Containing Pre-existing Fissures
Print ISBN: 978-3-662-47302-3

Electronic ISBN: 978-3-662-47303-0

Copyright-Jahr: 2015
DOI: https://doi.org/10.1007/978-3-662-47303-0_1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"