nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

06.04.2021 | ORIGINAL ARTICLE

Investigation of flat-clinching process using various thicknesses aluminum alloy sheets

verfasst von: Chao Chen, Huiyang Zhang, Xiaoqiang Ren, Jinliang Wu

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The current study is conducted to analyze the influence of thickness configurations on the mechanical properties of the flat-clinching joint. Al1060-H12 sheets with four-type thickness configurations were employed in flat-clinching process. Pull-out and single-lap shear tests were implemented to obtain the static strengths and absorbed energies of the clinching joints. Their main geometrical parameters and failure modes were also discussed and studied. The clinching joint with a thick top sheet achieves smaller undercut and greater neck thickness than the joint using a thick bottom sheet. Compared with the clinching joint using a thick bottom sheet, the joint with a thick top sheet has larger absorbed energy and static strength in single-lap shear tests. In pull-out tests, absorbed energy and static strength of the joint using a thick bottom sheet are larger than the joint with a thick top sheet. Flat-clinching process can reliably join Al1060-H12 sheets with different thickness configurations.

Vorheriger Artikel Evaluation and prediction of drilling wear based on machine vision

Nächster Artikel Effect of the fiber orientation on the tensile and flexural behavior of continuous carbon fiber composites made via fused filament fabrication

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Yang HY, He XC, Wang YQ (2013) Analytical model for strength of clinched joint in aluminium alloy sheet. In: Applied Mechanics and Materials. Trans Tech Publ, pp 578-581. https://doi.org/10.4028/www.scientific.net/AMM.401-403.578

Lee CJ, Kim JY, Lee SK, Ko DC, Kim BM (2010) Design of mechanical clinching tools for joining of aluminium alloy sheets. Mater Design 31(4):1854–1861. https://doi.org/10.1016/j.matdes.2009.10.064CrossRef

Lambiase F (2012) Influence of process parameters in mechanical clinching with extensible dies. Int J Adv Manuf Technol 66(9-12):2123–2131. https://doi.org/10.1007/s00170-012-4486-4CrossRef

Mori K, Abe Y, Kato T (2012) Mechanism of superiority of fatigue strength for aluminium alloy sheets joined by mechanical clinching and self-pierce riveting. J Mater Process Technol 212(9):1900–1905. https://doi.org/10.1016/j.jmatprotec.2012.04.017CrossRef

Abe Y, Mori K, Kato T (2012) Joining of high strength steel and aluminium alloy sheets by mechanical clinching with dies for control of metal flow. J Mater Process Technol 212(4):884–889. https://doi.org/10.1016/j.jmatprotec.2011.11.015CrossRef

Lambiase F, Di Ilio A (2014) An experimental study on clinched joints realized with different dies. Thin-Walled Struct 85:71–80. https://doi.org/10.1016/j.tws.2014.08.004CrossRef

He X (2017) Clinching for sheet materials. Sci Technol Adv Mater 18(1):381–405. https://doi.org/10.1080/14686996.2017.1320930CrossRef

Hamel V, Roelandt JM, Gacel JN, Schmit F (2000) Finite element modeling of clinch forming with automatic remeshing. Comput Struct 77(2):185–200. https://doi.org/10.1016/S0045-7949(99)00207-2CrossRef

Eshtayeh MM, Hrairi M (2016) Recent and future development of the application of finite element analysis in clinching process. Int J Adv Manuf Technol 84(9-12):2589–2608. https://doi.org/10.1007/s00170-015-7781-zCrossRef

10.

Lei L, He XC, Zhao DS, Zhang Y, Gu FS, Ball A (2018) Clinch-bonded hybrid joining for similar and dissimilar copper alloy, aluminium alloy and galvanised steel sheets. Thin-Walled Struct 131:393–403. https://doi.org/10.1016/j.tws.2018.07.017CrossRef

11.

Lambiase F, Di Ilio A, Paoletti A (2015) Joining aluminium alloys with reduced ductility by mechanical clinching. Int J Adv Manuf Technol 77(5-8):1295–1304. https://doi.org/10.1007/s00170-014-6556-2CrossRef

12.

Abe Y, Kato T, Mori K, Nishino S (2014) Mechanical clinching of ultra-high strength steel sheets and strength of joints. J Mater Process Technol 214(10):2112–2118. https://doi.org/10.1016/j.jmatprotec.2014.03.003CrossRef

13.

Abe Y, Nihsino S, Mori K, Saito T (2014) Improvement of joinability in mechanical clinching of ultra-high strength steel sheets using counter pressure with ring rubber. Procedia Engineer 81:2056–2061. https://doi.org/10.1016/j.proeng.2014.10.285CrossRef

14.

Wen T, Wang H, Yang C, Liu LT (2014) On a reshaping method of clinched joints to reduce the protrusion height. Int J Adv Manuf Technol 71(9-12):1709–1715. https://doi.org/10.1007/s00170-014-5612-2CrossRef

15.

Chen C, Zhao SD, Han XL, Cui MC, Fan SQ (2016) Investigation of mechanical behavior of the reshaped joints realized with different reshaping forces. Thin-Walled Struct 107:266–273. https://doi.org/10.1016/j.tws.2016.06.020CrossRef

16.

Chen C, Zhao S, Cui M, Han X, Ben N (2016) Numerical and experimental investigations of the reshaped joints with and without a rivet. Int J Adv Manuf Technol 88(5-8):2039–2051. https://doi.org/10.1007/s00170-016-8889-5CrossRef

17.

Chen C, Zhao SD, Han XL, Cui MC, Zhao XZ, Ishida T (2017) Experimental investigation of the mechanical reshaping process for joining aluminum alloy sheets with different thicknesses. J Manuf Process 26:105–112. https://doi.org/10.1016/j.jmapro.2017.01.015CrossRef

18.

Lambiase F, Ko DC (2017) Two-steps clinching of aluminum and carbon fiber teinforced polymer sheets. Compos Struct 164:180–188. https://doi.org/10.1016/j.compstruct.2016.12.072CrossRef

19.

Borsellino C, Di Bella G, Ruisi V (2007) Study of new joining technique: flat clinching. In: Key Engineering Materials. Trans Tech Publ, pp 685-692

20.

Neugebauer R, Todtermuschke M, Mauermann R, Riedel F (2008) Overview on the state of development and the application potential of dieless mechanical joining processes. Arch Civ Mech Eng 8(4):51–60. https://doi.org/10.1016/S1644-9665(12)60121-6CrossRef

21.

Sabra Atia MK, Jain MK (2018) A parametric study of FE modeling of die-less clinching of AA7075 aluminum sheets. Thin-Walled Struct 132:717–728. https://doi.org/10.1016/j.tws.2018.09.001CrossRef

22.

Sabra Atia MK, Jain MK (2018) Finite element analysis of material flow in die-less clinching process and joint strength assessment. Thin-Walled Struct 127:500–515. https://doi.org/10.1016/j.tws.2018.03.001CrossRef

23.

Chen C, Zhang H, Xu Y, Wu J (2020) Investigation of the flat-clinching process for joining three-layer sheets on thin-walled structures. Thin-Walled Struct 157:157. https://doi.org/10.1016/j.tws.2020.107034CrossRef

24.

Peng H, Chen C, Zhang HY, Ran XK (2020) Recent development of improved clinching process. Int J Adv Manuf Technol 110(11-12):3169–3199. https://doi.org/10.1007/s00170-020-05978-4CrossRef

25.

Gerstmann T, Awiszus B (2014) Recent developments in flat-clinching. Comput Mater Sci 81:39–44. https://doi.org/10.1016/j.commatsci.2013.07.013CrossRef

26.

Han X, Zhao S, Chen C, Liu C, Xu F (2017) Optimization of geometrical design of clinching tools in flat-clinching. J Mech Eng Sci 231(21):4012–4021. https://doi.org/10.1177/0954406216660335CrossRef

27.

Chen C, Zhao S, Han X, Zhao X, Ishida T (2017) Experimental investigation on the joining of aluminum alloy sheets using improved clinching process. Materials 10(8):887. https://doi.org/10.3390/ma10080887CrossRef

28.

Varis JP (2003) The suitability of clinching as a joining method for high-strength structural steel. J Mater Process Technol 132(1-3):242–249. https://doi.org/10.1016/S0924-0136(02)00933-0CrossRef

29.

Varis JP (2002) The suitability of round clinching tools for high strength structural steel. Thin-Walled Struct 40(3):225–238. https://doi.org/10.1016/S0263-8231(01)00063-5CrossRef

30.

Mucha J, Kascak L, Spisak E (2011) Joining the car-body sheets using clinching process with various thickness and mechanical property arrangements. Arch Civ Mech Eng 11(1):135–148. https://doi.org/10.1016/S1644-9665(12)60179-4CrossRef

31.

Chen C, Han X, Zhao S, Xu F, Zhao X, Ishida T (2017) Influence of sheet thickness on mechanical clinch–compress joining technology. P I MECH ENG E-J PRO 232(6):662–673. https://doi.org/10.1177/0954408917735717

32.

He XC, Zhao L, Yang HY, Xing BY, Wang YQ, Deng CJ, Gu FS, Ball A (2014) Investigations of strength and energy absorption of clinched joints. Comput Mater Sci 94:58–65. https://doi.org/10.1016/j.commatsci.2014.01.056CrossRef

33.

Lee CJ, Kim JY, Lee SK, Ko DC, Kim BM (2010) Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets. J Mech Sci Technol 24(1):123–126. https://doi.org/10.1007/s12206-009-1118-5CrossRef

34.

Coppieters S, Cooreman S, Lava P, Sol H, Van Houtte P, Debruyne D (2011) Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA. Int J Mater Form 4(4):429–440. https://doi.org/10.1007/s12289-010-1023-6CrossRef

35.

Pietrapertosa C, Zhang L, Habraken A, Jaspart J-P (2003) Clinching joining system: validation of numerical models. In: Proceedings of the 6th International Esaform Conference on Material Forming. Nuova Ipsa editire, pp 351-354

36.

Zhang Y, He XC, Wang YF, Lu Y, Gu FS, Ball A (2018) Study on failure mechanism of mechanical clinching in aluminium sheet materials. Int J Adv Manuf Technol 96(9-12):3057–3068. https://doi.org/10.1007/s00170-018-1734-2CrossRef

37.

Lei L, He XC, Yu TX, Xing BY (2019) Failure modes of mechanical clinching in metal sheet materials. Thin-Walled Struct 144:106281. https://doi.org/10.1016/j.tws.2019.106281CrossRef

Titel: Investigation of flat-clinching process using various thicknesses aluminum alloy sheets
verfasst von: Chao Chen
Huiyang Zhang
Xiaoqiang Ren
Jinliang Wu
Publikationsdatum: 06.04.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-06981-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2021

Condition monitoring of deep-hole drilling process based on improved empirical wavelet de-noising and high multiple frequency components of rotation frequency

Numerical simulation on the nonaxisymmetry arc characteristics in narrow gap TIG welding: responses to welding parameters

High-precision machining technology based on analytical method for integral impeller with flank milling

An efficient thermal cure profile design method for autoclave curing of large size mold

The effect of loading mode on isothermal local loading forming of magnesium alloy rib-web component

Optimization of cutting parameters in double-excitation ultrasonic elliptical vibration cutting of 630 stainless steel

Premium Partner

Marktübersichten