nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Investigation of Parameters for Machining a Difficult-to-Machine Superalloy: Inconel X-750 and Waspaloy

verfasst von : K. Vetri Velmurugan, K. Venkatesan, S. Devendiran, Arun Tom Mathew

Erschienen in: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nickel based super alloys has high mechanical strength, resistance to corrosion and oxidation and high temperature strength. Research work on Alloy X-750 and Waspaloy has been infrequent due to difficulties in machining. The present investigation aims to analyze the tool wear, turning forces, and roughness in dry turning of Inconel X-750 and Waspaloy. The experiments are designed using the following parameters: speed = 50, 75, 100 m/min; rate of feed = 0.05, 0.075, 0.125 mm/rev. The depth of cut was kept at a constant value of 0.5 mm. PVD-coated carbide inserts are used for the turning operation, and the coating material was AlTiN. The cutting forces and surface roughness were measured post the tool wore out. The microstructures and Vickers’ hardness of the superalloys were also studied. Finally, the range of cutting conditions is recommended for machining this alloy in an industrial environment.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Dry Machining of Nimonic 263 Alloy Using PVD and CVD Inserts

Nächstes Kapitel Aerodynamic Characteristics of Semi-spiroid Winglets at Subsonic Speed

Venkatesan, K., Ramanujam, R., Kuppan, P.: Parametric modeling and optimization of laser scanning parameters during laser-assisted machining of Inconel 718. Opt. Laser Technol. 78, 10–18 (2016)CrossRef

Ulutan, D., Ozel, T.: Machining induced surface integrity in titanium and nickel alloys: a review. Int. J. Mach. Tools Manuf. 51(3), 250–280 (2011)CrossRef

Bhatt, A., Attia, H., Vargas, R., Thomson, V.: Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718. Tribol. Int. 43(5), 1113–1121 (2010)CrossRef

Thakur, A., Gangopadhyay, S.: State-of-the-art in surface integrity in machining of nickel-based super alloys. Int. J. Mach. Tools Manuf. 100, 25–54 (2016)CrossRef

Ezentaş, R.: The investigation of the machinability of Inconel 718 and Waspaloy superalloys in CNC milling machines. Uludağ University Scientific Research Projects, Project 2008/74 (2010)

Ha, J.W., Seong, B.S., Jeong, H.W., Choi, Y.S., Kang, N.: Effects of the aging temperature and stress relaxation conditions on γ′ precipitation in Inconel X-750. J. Nucl. Mater. 457, 362–368 (2015)CrossRef

Thakur, A., Gangopadhyay, S.: Dry machining of the nickel-based superalloy as a sustainable alternative using TiN/TiAlN coated tool. J. Clean. Prod. 129, 256–268 (2016)CrossRef

Ezilarasan, C., Senthil kumar, V.S., Velayudham, A.: An experimental analysis and measurement of process performances in machining of Nimonic C-263 superalloy. Measurement 46, 185–199 (2013)CrossRef

Swain, N., Venkatesh, V., Kumar, P., Srinivas, G., Ravi Shankar, S., Barshilia, H.C.: An experimental investigation on the machining characteristics of Nimonic 75 using uncoated and TiAlN coated tungsten carbide micro-end mills. CIRP J. Manufact. Sci. Technol. 16, 34–42 (2017)CrossRef

10.

Ezilarasan, C., Senthil Kumar, V.S., Velayudham, A., Palanikumar, K.: Assessment of factors influencing tool wear on machining of Nimonic C-263 alloy with PVD coated carbide inserts. Adv. Mater. Res. 291–294, 794–799 (2011)CrossRef

11.

Stephenson, D.A., Skerlos, S.J., King, A.S., Supekar, S.D.: Rough turning Inconel 750 with supercritical CO₂-based minimum quantity lubrication. J. Mater. Process. Technol. 214(3), 673–680 (2014)CrossRef

12.

Olovsjö, S., Nyborg, L.: Influence of microstructure on wear behavior of uncoated WC tools in turning of alloy 718 and Waspaloy. Wear 282–283, 12–21 (2012)CrossRef

13.

Cantero, J.L., Díaz-Álvarez, J., Miguélez, M.H., Marín, N.C.: Analysis of tool wear patterns in finishing turning of Inconel 718. Wear 297(1–2), 885–894 (2013)CrossRef

14.

Ezugwu, E.O., Okeke, C.I.: Effects of coating materials on the machinability of a nickel base, C-263, alloy. Tribol. Trans. 43(3), 549–553 (2000)CrossRef

15.

Ezugwu, E.O., Okeke, C.I.: Behavior of coated carbide tools in high-speed machining of a nickel-based alloy. Tribol. Trans. 45(1), 122–126 (2002)CrossRef

16.

Prengel, H.G., Jindal, P.C., Wendt, K.H., Santhanam, A.T., Hegde, P.L., Penich, R.M.: A new class of high-performance PVD coatings for carbide cutting tools. Surf. Coat. Technol. 139(1), 25–34 (2001)CrossRef

17.

Podder, B., Paul, S.: Improvement of machinability in end milling of Nimonic C–263 by application of high-pressure coolant. Int. J. Mach. Mach. Mater. 11(4), 418–433 (2012)

18.

Koyilada, B., Gangopadhyay, S., Thakur, A.: Comparative evaluation of machinability characteristics of Nimonic C-263 using CVD and PVD coated tools. Measurement 85, 152–163 (2016)CrossRef

19.

Hsieh, J.H., Liang, C., Yu, C.H., Wu, W.: Deposition and characterization of TiAlN and multi-layered TiN/TiAlN coatings using unbalanced magnetron sputtering. Surf. Coat. Technol. 108, 132–137 (1998)CrossRef

20.

Thakur, A., Gangopadhyay, S.: Dry machining of the nickel-based superalloy as a sustainable alternative using TiN/TiAlN coated tool. J. Clean. Prod. 129, 256–268 (2016)CrossRef

21.

Thakur, A., Gangopadhyay, S., Maity, K.P., Sahoo, S.K.: Evaluation on effectiveness of CVD and PVD coated tools during dry machining of Incoloy 825. Tribol. Trans. 59(6), 1048–1058 (2016)CrossRef

22.

Settineri, L.: Surface properties and performance of multilayer coated tools in turning Inconel. CIRP Ann. Manuf. Technol. 54(1), 515–518 (2005)CrossRef

23.

Nalbant, M., Altin, M., Gokkaya, H.: The effect of cutting speed and cutting tool geometry on machinability properties of nickel-base Inconel 718 superalloys. Mater. Des. 28, 1334–1338 (2007)CrossRef

24.

Klocke, F., Settineri, L., Lung, D., Priarone, P.C., Arft, M.: High-performance cutting of gamma titanium aluminides: influence of lubricoolant strategy on tool wear and surface integrity. Wear 302, 1136–1144 (2013)CrossRef

25.

Diniz, A.E., de Oliveira, A.J.: Optimizing the use of dry cutting in rough turning steel operations. Int. J. Mach. Tools Manuf. 44(10), 1061–1067 (2004)CrossRef

26.

Wang, X., An, L.: Experimental study on the surface roughness of superalloy GH169 by dry turning with CBN cutting tools. In: Innovative Design and Manufacturing (ICIDM), Proceedings of the 2014 International Conference on IEEE (2014)

Titel: Investigation of Parameters for Machining a Difficult-to-Machine Superalloy: Inconel X-750 and Waspaloy
verfasst von: K. Vetri Velmurugan
K. Venkatesan
S. Devendiran
Arun Tom Mathew
Verlag: Springer Singapore
Buch: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
Print ISBN: 978-981-13-2717-9

Electronic ISBN: 978-981-13-2718-6

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-13-2718-6_19

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht