nach oben

Journal of Materials Engineering and Performance

Erschienen in:

19.07.2022 | Technical Article

Investigation on the Effect of Retrogression and Re-aging on Microstructure and Mechanical Properties of 2024 Aluminum Alloys

verfasst von: Enping Guo, Yanan Gao, Taoping Ye, Qianying Zhu, Baoliang Li

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the current study, a new artificial aging process, Retrogression and re-aging (RRA), which is a multi-step precipitation hardening, was utilized to investigate its effect on microstructure and mechanical properties of Al2024 alloys and compare the results with conventional T6. The microstructural evolution during heat treatment was studied by SEM and TEM, and tension test and hardness test were used to investigate the mechanical properties of specimens. The results showed that RRA process has improved the mechanical properties of Al2024 in comparison with T6. Yield stress, UTS, elongations and brinell hardness in RRA samples are higher than T6. The microstructural investigation revealed that during RRA, more secondary particles solute in matrix and more and finer S and θ phase precipitate. It was also observed that in RRA samples, S and θ phases have better distribution in Al matrix.

Vorheriger Artikel Structural Characterization of the Rolled and Annealed 7475 Aluminum Alloy

Nächster Artikel Diffusion Welding of Ti6Al4V and 17-4 Stainless Steel Using Cu/Ni Microlayers

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Staszczyk, J. Sawicki and B. Adamczyk-Cieslak, A Study of Second-Phase Precipitates and Dispersoid Particles in 2024 Aluminum Alloy After Different Aging Treatments, Materials, 2019, 12(24), p 4168. https://doi.org/10.3390/ma1224168CrossRef

D.A.P. Reis, A.A. Couto, N.I. Domingues, A.C.O. Hirschmann, S. Zepka and C. Moura Neto, Effect of Artificial Aging on the Mechanical Properties of an Aerospace Aluminum Alloy 2024, Defect Diffus Forum, 2012, 326, p 193–198. https://doi.org/10.4028/www.scientific.net/DDF.326-328.193CrossRef

S. Lipa, Ł Kaczmarek, M. Stegliński, H. Radziszewska, K. Kyzioł and D. Kottfer, Effect of Core/Shell Precipitations on Fatigue Strength of 2024-T6i6 Alloy, Int. J. Fatigue., 2019, 127, p 165–174. https://doi.org/10.1016/j.ijfatigue.2019.06.006CrossRef

G. Xiao, B. Chen, S. Li and X. Zhuo, Fatigue Life Analysis of Aero-Engine Blades for Abrasive Belt Grinding Considering Residual Stress, Eng. Fail. Anal., 2022, 131, p 105846. https://doi.org/10.1016/j.engfailanal.2021.105846CrossRef

Z.M. Liang, G.Y. Wang, Z. Bin Sun, D.L. Wang, L.W. Wang and Y.M. Liang, Rapidly Improved Tensile Strength of 6n01 Al Alloy Fsw Joints By Electropulsing and Artificial Aging Treatment, Mater. Sci. Eng. A, 2022, 841, p 143056. https://doi.org/10.1016/j.msea.2022.143056CrossRef

Y. Xie, X. Meng, F. Wang, Y. Jiang, X. Ma, L. Wan and Y. Huang, Insight on Corrosion Behavior of Friction Stir Welded Aa2219/Aa2195 Joints in Astronautical Engineering, Corros. Sci., 2021, 192, p 109800. https://doi.org/10.1016/j.corsci.2021.109800CrossRef

K.B. Demétrio, A.P.G. Nogueira, C. Menapace, T. Bendo and A. Molinari, Effect of Nanostructure on Phase Transformations during Heat Treatment of 2024 Aluminum Alloy, J. Mater. Res. Technol., 2021, 14, p 1800–1808. https://doi.org/10.1016/j.jmrt.2021.07.044CrossRef

C.K.S. Moy, M. Weiss, J. Xia, G. Sha, S.P. Ringer and G. Ranzi, Influence of Heat Treatment on the Microstructure, Texture and Formability of 2024 Aluminium Alloy, Mater. Sci. Eng. A, 2012, 552, p 48–60. https://doi.org/10.1016/j.msea.2012.04.113CrossRef

T.J. Bastow and A.J. Hill, Guinier-Preston and Guinier-Preston-Bagaryatsky Zone Reversion in Al-Cu-Mg Alloys Studied By Nmr, Mater. Sci. Forum., 2006, 519–521, p 1385–1390. https://doi.org/10.4028/www.scientific.net/msf.519-521.1385CrossRef

10.

H. Wang, J. Xie, Y. Chen, W. Liu and W. Zhong, Effect of Cocrfenimn High Entropy Alloy Interlayer on Microstructure and Mechanical Properties of Laser-Welded Niti/304 Ss Joint, J. Mater. Res. Technol., 2022, 18, p 1028–1037. https://doi.org/10.1016/j.jmrt.2022.03.022CrossRef

11.

L. Liang, M. Xu, Y. Chen, T. Zhang, W. Tong, H. Liu, H. Wang and H. Li, Effect of Welding Thermal Treatment on the Microstructure and Mechanical Properties of Nickel-Based Superalloy Fabricated By Selective Laser Melting, Mater. Sci. Eng. A, 2021, 819, p 141507. https://doi.org/10.1016/j.msea.2021.141507CrossRef

12.

S.C. Wang and M.J. Starink, Two Types of S Phase Precipitates in Al-Cu-Mg Alloys, Acta Mater., 2007, 55, p 933–941. https://doi.org/10.1016/j.actamat.2006.09.015CrossRef

13.

Y. Zhong, J. Xie, Y. Chen, L. Yin, P. He and W. Lu, Microstructure and Mechanical Properties of Micro Laser Welding NiTiNb/Ti6Al4V Dissimilar Alloys Lap Joints with Nickel Interlayer, Mater. Lett., 2022, 306, p 130896. https://doi.org/10.1016/j.matlet.2021.130896CrossRef

14.

L. Sun, Y. Guo, L. Chen and G. Zhao, Effects of Solution and Aging Treatments on the Microstructure and Mechanical Properties of Cold Rolled 2024 Al Alloy Sheet, J. Mater. Res. Technol., 2021, 12, p 1126–1142. https://doi.org/10.1016/j.jmrt.2021.03.051CrossRef

15.

Y. Zhao, Stability of Phase Boundary Between L12-Ni3Al Phases: A Phase Field Study, Intermetallics, 2022, 144, p 107528. https://doi.org/10.1016/j.intermet.2022.107528CrossRef

16.

Y. Zhao, K. Liu, H. Hou and L.-Q. Chen, Role of Interfacial Energy Anisotropy in Dendrite Orientation in Al-Zn Alloys: A phase Field Study, Mater. Des., 2022, 216, p 110555. https://doi.org/10.1016/j.matdes.2022.110555CrossRef

17.

M. Emamy, M. Oliayee and K. Tavighi, Author ’s Accepted Manuscript, Mater. Sci. Eng. A, 2014 https://doi.org/10.1016/j.msea.2014.12.023CrossRef

18.

N.D. Alexopoulos, Z. Velonaki, C.I. Stergiou and S.K. Kourkoulis, The Effect of Artificial Ageing Heat Treatments on the Corrosion-Induced Hydrogen Embrittlement of 2024 (Al-Cu) aluminium alloy, Corros. Sci., 2016, 102, p 413–424. https://doi.org/10.1016/j.corsci.2015.10.034CrossRef

19.

M.S. Nandana, K. Udaya Bhat and C.M. Manjunatha, Effect of Retrogression and Re-ageing Heat Treatment on Microstructure and Microhardness of Aluminium 7010 Alloy, MATEC Web Conf., 2018 https://doi.org/10.1051/matecconf/201714402003CrossRef

20.

R. Gürbüz, N. Akgün, Efect of retrogression and re-aging heat treatment on the corrosion fatigue crack growth behavior of AA7050 aluminum alloy. In: 11th Int. Conf. Fract. 2005, ICF11. 1 (2005) 95

21.

S.V. Emani, J. Benedyk, P. Nash and D. Chen, Double Aging and Thermomechanical Heat Treatment of AA7075 Aluminum Alloy Extrusions, J. Mater. Sci., 2009, 44, p 6384–6391. https://doi.org/10.1007/s10853-009-3879-8CrossRef

22.

X. Li, H. Wang, T. Shi, C. Zhang, X. Jiang, X. Zhou and C. Li, Efficient Preparation and Anticorrosion Mechanism of Superhydrophobic 7075 Aviation Aluminum Alloy, Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met, Mater. Eng., 2022, 51, p 6–10.

23.

Y. Xu, H. Zhang, F. Yang, L. Tong, D. Yan, Y. Yang, Y. Wang and Y. Wu, Experimental Investigation of Pneumatic Motor for transport Application, Renew. Energy, 2021, 179, p 517–527. https://doi.org/10.1016/j.renene.2021.07.072CrossRef

24.

B. Cina, (1974), https://patents.google.com/patent/US3856584A/en. Reducing the Susceptibility of Alloys, Particularly Aluminium Alloys, to Stress Corrosion Cracking

25.

J.F. Li, Z.W. Peng, C.X. Li, Z.Q. Jia, W.J. Chen and Z.Q. Zheng, Mechanical Properties, Corrosion Behaviors and Microstructures of 7075 Aluminium Alloy with Various Aging Treatments, Trans. Nonferrous Met. Soc. China, 2008, 18, p 755–762. https://doi.org/10.1016/S1003-6326(08)60130-2CrossRef

26.

Z. Wu, S. Wu, J. Bao, W. Qian, S. Karabal, W. Sun and P.J. Withers, The Effect of Defect Population on the Anisotropic Fatigue Resistance of AlSi10Mg Alloy Fabricated by Laser Powder Bed Fusion, Int. J. Fatigue., 2021, 151, p 106317. https://doi.org/10.1016/j.ijfatigue.2021.106317CrossRef

27.

X. Li, X. Yang, D. Yi, B. Liu, J. Zhu, J. Li, C. Gao and L. Wang, Effects of NbC Content on Microstructural Evolution and Mechanical Properties of Laser Cladded Fe50Mn30Co10Cr10-xNbC Composite Coatings, Intermetallics, 2021, 138, p 107309. https://doi.org/10.1016/j.intermet.2021.107309CrossRef

28.

X. Li, D. Yi, X. Wu, J. Zhang, X. Yang, Z. Zhao, Y. Feng, J. Wang, P. Bai, B. Liu and Y. Liu, Effect of Construction Angles on Microstructure and Mechanical Properties of AlSi10Mg Alloy Fabricated by Selective Laser Melting, J. Alloys Compd., 2021, 881, p 160459. https://doi.org/10.1016/j.jallcom.2021.160459CrossRef

29.

S. Pournazari, K.M. Deen, D.M. Maijer and E. Asselin, Effect of Retrogression and Re-aging (RRA) Heat Treatment on the Corrosion Behavior of B206 Aluminum-Copper Casting Alloy, Mater. Corros., 2018, 69, p 998–1015. https://doi.org/10.1002/maco.201709925CrossRef

30.

I. ASTM, ASTM E8/E8M Standard Test Methods For Tension Testing of Metallic Materials, ASTM Int, 2010 https://doi.org/10.1520/E0008CrossRef

31.

I. Standard, (2003) International Standard Metallic Materials Sheet and Strip

32.

Z.Q. Feng, Y.Q. Yang, B. Huang, M.H. Li, Y.X. Chen and J.G. Ru, Crystal Substructures of the Rotation-Twinned T (Al20Cu 2Mn3) Phase in 2024 Aluminum Alloy, J. Alloys Compd., 2014, 583, p 445–451. https://doi.org/10.1016/j.jallcom.2013.08.200CrossRef

33.

S. Krymskiy, O. Sitdikov, E. Avtokratova and M. Markushev, 2024 Aluminum Alloy Ultrahigh-Strength Sheet Due to Two-Level Nanostructuring Under Cryorolling and Heat Treatment, Trans. Nonferrous Met. Soc. China, 2020, 30, p 14–26. https://doi.org/10.1016/S1003-6326(19)65176-9CrossRef

Titel: Investigation on the Effect of Retrogression and Re-aging on Microstructure and Mechanical Properties of 2024 Aluminum Alloys
verfasst von: Enping Guo
Yanan Gao
Taoping Ye
Qianying Zhu
Baoliang Li
Publikationsdatum: 19.07.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2023
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07141-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2023

Study on Hot Corrosion Resistance of In Situ Generated TiC and TiC + TiB Reinforced TB8 Titanium Matrix Composite by Powder Metallurgy

Effect of Solution Treatment on the Microstructure and Properties of Thixotropic Back-Extruded Copper Alloy Bushings

Diffusion Welding of Ti6Al4V and 17-4 Stainless Steel Using Cu/Ni Microlayers

Isothermal Investigation and Deformation Behavior during Homogenization of 6063 Aluminum Alloy

Influence of Hydrogen on Fatigue Crack Growth in 7075 Aluminum Alloy

Application of Taguchi Method Design to Investigate Tribological Performance of Laser-Surface-Textured 316L Austenitic Stainless Steel

Premium Partner

Marktübersichten