nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Investigation on Wear Characteristics of a PLA-14% Bronze Composite Filament

verfasst von : P. Sneha, K. Balamurugan

Erschienen in: Recent Trends in Product Design and Intelligent Manufacturing Systems

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present work explains and processes the fabricated of a 3D composite filament using wear characteristics of a polylactic acid (PLA)-14% bronze composite filament to obtain a technique as pin-on-disc apparatus. The process is by varying the three parameters such as load, track diameter and speed. To optimize the wear and coefficient of friction, grey relational analysis (GRA) technique was used. The results were obtained that the performance of a load was greatly influenced on the effect of the printed end sample. Load and track diameter which are highly influenced over the mechanical properties are investigated. Track diameter is highly influenced on the effect of the mechanical properties.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Investigation and Assessment of Mechanical Properties of Al-Fly Ash

Nächstes Kapitel Tribological Properties of Metal Particulate Reinforced Polymeric Functionally Graded Materials

Almajid, A.A.: Mechanical, physical and wear properties of 3D printed polylactic acid materials. Key Eng. Mater., 118–125 (2020)

Betancourt-Dougherty, I.C., Smith, R.W.: Effects of load and sliding speed on the wear behaviour of plasma sprayed TiC-NiCrBSi coatings. Wear 147–154 (1998)

Ertane, E.G., Reisel, A.D., Baran, O., Welzel, T., Matner, V., Svoboda, S.: Processing and wear behavoir of 3D printed PLA reinforced with biogenic carbon. Adv. Tribol. 11 (2018)

Garbar, I.I.: The effect of load on the structure and wear of friction pair materials (example of low-carbon steel and copper). Wear 240–245 (1997)

Gunasekaran, K.N., Aravinth, V., Muthu Kumaran, C.B., Madhankumar, K., Pradeep Kumar, S.: Investigation of mechanical properties of PLA printed materials under varying infill density. Mater. Today Proc. (2020)

Hemalata, J., Arun Kumar, P., Mihir Kumar, P.: Study of slod particle erosion wear behaviour of bamboo fiber reinforced polymer composite with cenosphere filler. Adv. Polym. Technol., 21718–21226 (2015)

Hervan, H.Z., Altnkayanak, A., Parlar, A.: Hardness, friction and wear characteristics of 3D-printed PLA polymer. J. Eng. Tribol., 1–9 (2020)

Narendiranath Babu, T., Chauhan, M., Alam, M.I., Shah, J.: Improving wear properties of musti kusa grass fiber reinforced with aluminium oxide and silicon carbide. Mater. Today Proc., 13003–13009 (2017)

Pramendra Kumar, B., Inderdeep, S., Jitendra, M.: Tribological behavior of natural fiber reinforced PLA composites. Wear, 829–840 (2013)

10.

Singh, R., Kumar, S., Bedi, P., Hashmi, M.S.J.: On wear of 3D printed Al₂O₃ reinforced Nylon6 matrix based functional prototypes. Mater. Today Proc. 2214–7853 (2019)

11.

Singh, R.K., Telang, A., Das, S.: The influence of abrasive size and applied load on abrasive wear of Al-SiCp composite. Arbian J. Sci. Eng. (2021)

12.

Srinivasan, R., Aravind Kumar, N., Aravind Krishna, S., Aadhishwaran, S., John, G.: Influence of fused deposition modelling process parameters on wear strength of carbon fibre PLA. Mater. Today Proc. (2020)

13.

Siva Surya, M., Gugulothu, S.K.: Fabrication, Mechanical and Wear Characteristics of Silicon Carbide Reinforced Aluminium 7075 Metal Matrix Composite (2021)

14.

Thomsorn, S., Mathurosemontri, S., Nagai, S., Hamada, H.: Investigation of friction and wear behavior of polyoxymethylene/poly (lactic acid) blends. Key Eng. Mater., 229–234 (2017)

15.

El-Tayeb, N.S.M., Yousif, B.F., Yap, T.C.: An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribol. Int., 331–340 (2008)

Titel: Investigation on Wear Characteristics of a PLA-14% Bronze Composite Filament
verfasst von: P. Sneha
K. Balamurugan
Verlag: Springer Nature Singapore
Buch: Recent Trends in Product Design and Intelligent Manufacturing Systems
Print ISBN: 978-981-19-4605-9

Electronic ISBN: 978-981-19-4606-6

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-981-19-4606-6_42

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht