Ausgabe 13/1999
Inhalt (34 Artikel)
Reaction characteristics of La0.84Sr0.16CrO3 formation
A. L. Wagner, A. J. Jacobson, J. T. Richardson, D. Luss
Heat treatment investigations on the laser synthesized amorphous Si/C/N nanocomposite powders
Z. W. Pan, S. S. Xie, G. Wang, H. L. Li, L. T. Zhang
Effect of Na-diffusion on the electrical properties of SrTiO3
Seong-Ho Kim, Jae-Dong Byun, Yoonho Kim
Transcrystallization with reorientation in drawn PET/PA12 blend as revealed by WAXS from synchrotron radiation
D. Sapoundjieva, Z. Denchev, M. Evstatiev, S. Fakirov, N. Stribeck, M. Stamm
FTIRS study of porous silicon at different oxidation stages
J. D. Moreno, R. Guerrero-Lemus, R. J. Martín-Palma, J. M. Martínez-Duart, M. L. Marcos, J. González-Velasco
Synthesis of ZSM-5 zeolite composite membranes for CO2 separation
S. H. Hyun, J. K. Song, B. I. Kwak, J. H. Kim, S. A. Hong
Crystalline β-C3N4 synthesized by MPCVD
Y. S. Gu, Y. P. Zhang, Z. J. Duan, X. R. Chang, Z. Z. Tian, N. X. Chen, C. Dong, D. X. Shi, X. F. Zhang, L. Yuan
Sol-gel/co-precipitation method for the preparation and characterization of zirconia-tungsten composite powders
S. Vives, C. Guizard, L. Cot, C. Oberlin
The corrosion of tantalum in oxidizing sub- and supercritical aqueous solutions of HCl, H2SO4 and H3PO4
C. Friedrich, P. Kritzer, N. Boukis, G. Franz, E. Dinjus
A novel way of estimation of the apparent activation energy of cement hydration using microwave technique
X. Zhang, Y. Yang, C. K. Ong
X-ray diffraction analysis of 10,12-pentacosadiynoic acid Langmuir-Blodgett films during polymerization
Yu Shufang, Zhou Huilin, He Pingsheng
Effect of gas evolution at solid-liquid interface on contact angle between liquid Si and SiO2
H. Fujii, M. Yamamoto, S. Hara, K. Nogi
High-frequency dielectric behaviour of polycrystalline zinc substituted cobalt ferrites
A. V. Ramana Reddy, G. Ranga Mohan, D. Ravinder, B. S. Boyanov
Influence of the preparation conditions on the synthesis of high surface area SiC for use as a heterogeneous catalyst support
N. Keller, C. Pham-Huu, S. Roy, M. J. Ledoux, C. Estournes, J. Guille
Characterization of single and discretely-stepped electro-composite coatings of nickel-alumina
S. W. Banovic, K. Barmak, A. R. Marder
Processing parameter effects on the reaction bonding of aluminum oxide process*
E. Suvaci, G. L. Messing
Defect formation during binder removal in ethylene vinyl acetate filled system
K. E. Hrdina, J. W. Halloran, M. Kaviany, A. Oliveira
Mechanism and reversible behavior of the α′ → γ transformation in 1Cr18Ni9Ti stainless steel
Y. Zhang, X. T. Jing, B. Z. Lou, F. S. Shen, F. Z. Cui