Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 2/2021

Ausgabe 2/2021

Inhaltsverzeichnis ( 42 Artikel )

28.01.2021 | Original Article | Ausgabe 2/2021

Initial fault time estimation of rolling element bearing by backtracking strategy, improved VMD and infogram

Abdalla Babiker, Changfeng Yan, Qiang Li, Jiadong Meng, Lixiao Wu

28.01.2021 | Original Article | Ausgabe 2/2021

Neuro-fuzzy fatigue life assessment using the wavelet-based multifractality parameters

C. H. Chin, S. Abdullah, S. S. K. Singh, A. K. Ariffin, D. Schramm

28.01.2021 | Original Article | Ausgabe 2/2021

Changes of projectile attitude and its influence parameters during the process of penetration on the ship plate structure through material point method

Yinan Wang, Zhi Wang, Xiongliang Yao, Nana Yang, Zhipeng Chen

21.01.2021 | Original Article | Ausgabe 2/2021

Hybrid model for the analysis of the modal properties of a ball screw vibration system

Qin Wu, Fengshou Gu, Andrew Ball, Hua Huang

28.01.2021 | Original Article | Ausgabe 2/2021

The use of operational modal analysis in the process of modal parameters identification in a rotating machine supported by roller bearings

Gustavo Storti, Tiago Machado

28.01.2021 | Original Article | Ausgabe 2/2021

A method for identification of analyte concentration in aqueous solution by using a mistuned fluid-structure coupled vibration

Yugang Chen, Kang-Jae Park, Bomi Lee, Yong-Hwa Park

28.01.2021 | Original Article | Ausgabe 2/2021

The optimal design of the mounting rubber system for reducing vibration of the air compressor focusing on complex dynamic stiffness

Uyeup Park, Jeon Heon Lee, Kwanju Kim

28.01.2021 | Original Article | Ausgabe 2/2021

Functional data analysis for assessing the fatigue life of construction equipment attachments

Sung-Hyun Kim, Jong-Won Park, Jae-Hoon Kim

28.01.2021 | Original Article | Ausgabe 2/2021

Fatigue life and effect of sloshing according to the scale ratio of a prismatic LNG tank

Young-Jin Park, San Kim, Jong-Rae Cho, Deog-Hee Doh, Gyeong-Rae Cho

28.01.2021 | Original Article | Ausgabe 2/2021

Sensitivity analysis and parameter interval optimization for residual stress in polishing process of GH4169 blisk blade

Xiaojun Lin, Xiaopeng Xin, Rui Yang, Zhaozhao Lei, Luzhou Sun, Bao Yang, Changyou Bai, Yangwei Yan

28.01.2021 | Original Article | Ausgabe 2/2021

Measurement enhancement of TDLAS based on variable weighted cross-correlation tomography for the simultaneous reconstruction of 2D temperature and concentration

Gyong-Rae Cho, Doo-Won Choi

28.01.2021 | Original Article | Ausgabe 2/2021

Interval non-probabilistic time-dependent reliability analysis of boom crane structures

Yang Ruigang, Li Wenzhao, Zhao Guangli, Liu Yuzhen, Jing Weichen

28.01.2021 | Original Article | Ausgabe 2/2021

Design optimization of OCTG premium connection system based on the effect of stabbing flank angle

Byeongil Kim, Jie Huang, Jong-Yun Yoon

28.01.2021 | Original Article | Ausgabe 2/2021

Effect of boattail angle on near-wake flow and drag of axisymmetric models: a numerical approach

The Hung Tran, Hoang Quan Dinh, Hoang Quan Chu, Van Quang Duong, Chung Pham, Van Minh Do

28.01.2021 | Original Article | Ausgabe 2/2021

Simulation study of pressure change between cryogenic reservoir and pump

Byeung-Cheol An, Young-Bog Ham, Mojiz Abbas Trimzi, So-Nam Yun, Jung-Ho Park

28.01.2021 | Original Article | Ausgabe 2/2021

A study on the behavior of reed valves using various pressure pulses

Il Sun Hwang, Young Lim Lee

22.01.2021 | Original Article | Ausgabe 2/2021

An adaptive plate at flapping wing’s trailing edge in promoting energy extraction performance

Longfeng Hou, Pu Yang, Dongmei Du, Bing Zhu

28.01.2021 | Original Article | Ausgabe 2/2021

Performance analysis of embedded tri-screw pump based on computational fluid dynamics

Yongqiang Zhao, Bowen Zhu, Hongling Hou, Shengdun Zhao

22.01.2021 | Original Article | Ausgabe 2/2021

Effects of detailed shape of air-shaft entrance hood on tunnel pressure waves

Dong Hyeon Kim, Yong Cheol Seo, Tae Ho Kim, Heuy Dong Kim

28.01.2021 | Original Article | Ausgabe 2/2021

A coupled level set/volume of fluid method for simulation of two-phase flow on unstructured grids

Long Cu Ngo, Hyoung Gwon Choi, Kyoungsik Chang

28.01.2021 | Original Article | Ausgabe 2/2021

Analytical approach of funnel flow discharge

Ferenc Safranyik, István Oldal

28.01.2021 | Original Article | Ausgabe 2/2021

Numerical analysis of elasto-plastic adhesively single step lap joints with cohesive zone models and its experimental verification

Simay Bayramoglu, Salih Akpinar, Ahmet Çalık

28.01.2021 | Original Article | Ausgabe 2/2021

Improved strategies for the load-bearing capacity of aluminum-PVC foam sandwich floors of a high-speed train

Haifeng Chang, Lele Zhang, Weiyuan Dou, Haifeng Zhang

28.01.2021 | Original Article | Ausgabe 2/2021

Highly flexible cover window using ultra-thin glass for foldable displays

Myeong-Hun Ha, Jong-Keun Choi, Byung-Min Park, Kwan-Young Han

28.01.2021 | Original Article | Ausgabe 2/2021

Thermal-mechanical fully coupled analysis of high-speed angular contact ball bearings

Lanwen Wang, Xuanyu Sheng, Jianbin Luo

28.01.2021 | Original Article | Ausgabe 2/2021

Evaluation of air layer behavior on patterned PTFE surfaces under underwater environment conditions

Kwang Jae Yoo, In Yong Moon, Ho Won Lee, Young-Seok Oh, Se-Jong Kim, Young Hoon Moon, Seong-Hoon Kang

28.01.2021 | Original Article | Ausgabe 2/2021

Nanofluid selection used for coolant in heat exchanger by multiple attribute decision-making method

M. B. Maisuria, D. M. Sonar, M. K. Rathod

28.01.2021 | Original Article | Ausgabe 2/2021

A polymer membrane electrolysis micropump powered by a compact wireless power transmission system

Chao-Wei Dong, Le-Giang Tran, Woo-Tae Park

28.01.2021 | Original Article | Ausgabe 2/2021

An algorithm for prediction of bending deformation induced by multi-seam welding of a steel-pipe structure

Chunbiao Wu, Chao Wang, Changhoon Lee, Jae-Woong Kim

28.01.2021 | Original Article | Ausgabe 2/2021

Analysis of the PU-2UPS antenna parallel mechanism

Guoxing Zhang, Jinwei Guo, Yulei Hou, Daxing Zeng

28.01.2021 | Original Article | Ausgabe 2/2021

Identification of geometric parameters of a parallel robot by using a camera calibration technique

Mauricio Arredondo-Soto, Mario A. García-Murillo, J. Jesús Cervantes-Sánchez, Felipe J. Torres, Hector A. Moreno-Avalos

28.01.2021 | Original Article | Ausgabe 2/2021

Dynamic analysis of the center position control and design of disturbance observers during annealing and pickling

Cheol Jae Park

28.01.2021 | Original Article | Ausgabe 2/2021

Identification of stable zone via linear stability analysis of supercritical water natural circulation loop

Neetesh Singh Raghuvanshi, Goutam Dutta, Manoj Kumar Panda

28.01.2021 | Original Article | Ausgabe 2/2021

Pressure drop and flow characteristic of CO2 hydrate slurry formation in the presence of anti-agglomerant in a flow loop facility

Benedict Prah, Rin Yun

28.01.2021 | Original Article | Ausgabe 2/2021

An experiment investigation of temperature control performance for machine tool oil coolers with hot-gas bypass temperature control scheme and inverter temperature control scheme

Wei-Ming Chiang, Fu-Jen Wang, Kusnandar

28.01.2021 | Original Article | Ausgabe 2/2021

Experimental study on heat release characteristics of thermochemical heat storage considering various operating parameters

Sungkook Hong, Jae-yong Lee, Hyunhee Lee, Hyunwoo Tak

28.01.2021 | Original Article | Ausgabe 2/2021

Thermal balance performance simulation and optimization of full-ground crane cabins

Yongkang Shi, Zhenlei Chen, Haitao He, Fan Shi, Penyong Liu, Yong Wang

28.01.2021 | Original Article | Ausgabe 2/2021

Predictive model for PV power generation using RNN (LSTM)

Min Kyeong Park, Jong Man Lee, Won Hee Kang, Jong Min Choi, Kwang Ho Lee

28.01.2021 | Original Article | Ausgabe 2/2021

Effect of exhaust manifold geometry and engine parameters on flow pulsations inside the exhaust system with CCC under firing conditions

Han-Sang Kim

28.01.2021 | Original Article | Ausgabe 2/2021

Antibacterial properties of ferrimagnetic and superparamagnetic nanoparticles: a comparative study

Mohammadhossein Shahsavari Alavijeh, Milad Salimi Bani, Iman Rad, Shadie Hatamie, Mahsa Soufi Zomorod, Mohammad Haghpanahi

28.01.2021 | Original Article | Ausgabe 2/2021

High solid content 45S5 Bioglass®-based scaffolds using stereolithographic ceramic manufacturing: process, structural and mechanical properties

Zhiyong Ma, Jun Xie, Xian Zhen Shan, Jiabin Zhang, Qifan Wang

01.02.2021 | Erratum | Ausgabe 2/2021

Erratum to “Numerical study of mist film cooling on a flat plate with various numbers of deposition” [35 (1) (2021) 351~360]

Jishnu Handique

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise