Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 9/2020

Ausgabe 9/2020

Inhaltsverzeichnis ( 40 Artikel )

03.09.2020 | Original Article | Ausgabe 9/2020

Three degrees of freedom chatter stability prediction in the milling process

Dan Gu, Yuan Wei, Bin Xiong, Shulin Liu, Dongfang Zhao, Baoqiang Wang

03.09.2020 | Original Article | Ausgabe 9/2020

Analysis of coupled vibration characteristics of PMS grinding motorized spindle

Feng Gao, Mingke Cheng, Yan Li

03.09.2020 | Original Article | Ausgabe 9/2020

A design sensitivity analysis of bicycle stability and experimental validation

Sheng-peng Zhang, Tae-oh Tak

03.09.2020 | Original Article | Ausgabe 9/2020

Modeling and controlling a semi-active nonlinear single-stage vibration isolator using intelligent inverse model of an MR damper

Seiyed Hamid Mousavi

03.09.2020 | Original Article | Ausgabe 9/2020

A study on sound quality of vehicle engine sportiness using factor analysis

Jae Hyuk Park, Hansol Park, Yeon June Kang

03.09.2020 | Original Article | Ausgabe 9/2020

Nondimensional modelling of 2D beam for slope discontinuity problem in ANCF

Jiheon Kang, Jaewook Lee, Jinseok Jang, Changyoung Choi, Kunwoo Kim

03.09.2020 | Original Article | Ausgabe 9/2020

Modeling and performance analysis of a novel M-shaped piezoelectric energy harvester employing magnets

Sun Keol Lim, Hong Hee Yoo

03.09.2020 | Original Article | Ausgabe 9/2020

A novel antibody population optimization based artificial immune system for rotating equipment anomaly detection

Qinyu Jiang, Faliang Chang

03.09.2020 | Original Article | Ausgabe 9/2020

A novel modified analytical method and finite element method for vibration analysis of cable-driven parallel robots

Sy Nguyen-Van, Kwan-Woong Gwak, Duc-Hai Nguyen, Soon-Geul Lee, Byoung Hun Kang

03.09.2020 | Original Article | Ausgabe 9/2020

A numerical study on an infinite linear elastic Bernoulli-Euler beam on a viscoelastic foundation subjected to harmonic line loads

S. Syngellakis, Jinsoo Park, Dae Seung Cho, Taek Soo Jang

03.09.2020 | Original Article | Ausgabe 9/2020

Experimental study of the association between sandstone size effect and strain rate effect

Siming Kao, Guangming Zhao, Wensong Xu, Xiang Cheng, Chunliang Dong, Ruofei Zhang

03.09.2020 | Original Article | Ausgabe 9/2020

Roll profile design for shaped wire rolling with high aspect ratio

Jeong-Hun Kim, Jae-Hong Kim, Kyung-Hun Lee, Young-Hoon Moon, Dae-Cheol Ko

03.09.2020 | Original Article | Ausgabe 9/2020

A framework for structural reliability analysis based on conjugate sensitivity factor and saddlepoint approximation

Peng Huang, Hong-Zhong Huang, Tudi Huang, Hua-Ming Qian

03.09.2020 | Original Article | Ausgabe 9/2020

YSZ atmospheric plasma coating method for improved high temperature corrosion and wear resistance

Jong-Kweon Lee, Hong Gun Kim

03.09.2020 | Original Article | Ausgabe 9/2020

Effect of the magnetic field direction on the mass-imbalance of MHD flows in a multi-channel conduit with spatially non-uniform electric conductivity

Xuejiao Xiao, Shangjing Yang, Chang Nyung Kim

03.09.2020 | Original Article | Ausgabe 9/2020

Improvement of flow behavior in the spiral casing of Francis hydro turbine model by shape optimization

Ujjwal Shrestha, Young-Do Choi

03.09.2020 | Original Article | Ausgabe 9/2020

Investigation on characteristics of pressure fluctuation in a centrifugal pump with clearance flow

Lulu Zheng, Xiaoping Chen, Wei Zhang, Zuchao Zhu, Jinglei Qu, Mengmeng Wang, Xiaojie Ma, Xueli Cheng

03.09.2020 | Original Article | Ausgabe 9/2020

Numerical analysis of the formation mechanism and suppression method of the reverse flow in a semi-open centrifugal pump

Like Wang, Jinling Lu, Weili Liao, Wei Wang, Jianjun Feng, Yaping Zhao

03.09.2020 | Original Article | Ausgabe 9/2020

Experimental study on momentum of electrohydrodynamic flow induced by corona discharge in the pin to two cylinder configuration

Jae Won Lee, Dong Kee Sohn, Han Seo Ko

03.09.2020 | Original Article | Ausgabe 9/2020

Isogeometric analysis of functionally graded CNT-reinforced composite plates based on refined plate theory

Zhenyu Liu, Chuang Wang, Guifang Duan, Jianrong Tan

03.09.2020 | Original Article | Ausgabe 9/2020

Locking-free robust finite element approximation of thin shell-like structures

Hong-Woo Lee, Jin-Rae Cho, Do-Young Kim

03.09.2020 | Original Article | Ausgabe 9/2020

Delamination behavior of L-shaped composite beam with manufacturing defects

Kyeongsik Woo, Biruk F. Nega, Douglas S. Cairns, Jim Lua

03.09.2020 | Original Article | Ausgabe 9/2020

Molecular dynamics simulation on the phase change of argon molecules between two plates in a wide range of temperature variation

Youngjin Kim, Man Yeong Ha

03.09.2020 | Original Article | Ausgabe 9/2020

Impact of pinless stirring tools with different shoulder profile designs on friction stir spot welded joints

Ahmet Atak

03.09.2020 | Original Article | Ausgabe 9/2020

Accurate prediction method of initial value of high-speed ball bearing model and gyroscopic torque analysis

Lina Hao, Song Deng, Dongsheng Qian, Lin Hua

03.09.2020 | Original Article | Ausgabe 9/2020

Investigations on corrosion resistance behavior in micro-milling of Ti-6Al-4V and Ti-6Al-7Nb alloy: a comparative study

D. Avinash, S. P. Leo Kumar

03.09.2020 | Original Article | Ausgabe 9/2020

Influence of micro-textured parameters on cutting performance and chip formation of milling Ti6Al4V

Xin Tong, Song Yu

03.09.2020 | Original Article | Ausgabe 9/2020

Machining scheme of aviation bearing bracket based on additive and subtractive hybrid manufacturing

Yunpeng Xie, Jianbin Tong, Yuqiang Fu, Zhongqi Sheng

03.09.2020 | Original Article | Ausgabe 9/2020

Theoretical and experimental investigations of surface roughness, surface topography, and chip shape in ultrasonic vibration-assisted turning of Inconel 718

Yingshuai Xu, Fei Gao, Ping Zou, Qinjian Zhang, Fanglei Fan

03.09.2020 | Original Article | Ausgabe 9/2020

Investigating the micro-structures of A356 semi-solids based on electromagnetic stirring currents and crucible materials

Min Heo, Chul Kyu Jin, Joong Suk Roh, Chung Gill Kang

03.09.2020 | Original Article | Ausgabe 9/2020

Novel design of a family of legged mobile landers based on decoupled landing and walking functions

Rongfu Lin, Weizhong Guo

03.09.2020 | Original Article | Ausgabe 9/2020

Influence of hexapod robot foot shape on sinking considering multibody dynamics

Gang He, Zhaoyuan Cao, Qian Li, Denglin Zhu, Ji Aimin

03.09.2020 | Original Article | Ausgabe 9/2020

Two-stage optimization for energy-efficient bipedal walking

Jiatao Ding, Xiaohui Xiao

03.09.2020 | Original Article | Ausgabe 9/2020

Single 2D lidar based follow-me of mobile robot on hilly terrains

Jihoon Kim, Hyungjin Jeong, Donghun Lee

03.09.2020 | Original Article | Ausgabe 9/2020

Mass exchange at liquid-solid interface: a molecular simulation scheme applied to evaporation phenomena

Minsub Han

03.09.2020 | Original Article | Ausgabe 9/2020

Optimal thermo-economic design of a PAFC-ORC combined power system

Hye Rim Kim, Jae Hong Lee, Tong Seop Kim

03.09.2020 | Original Article | Ausgabe 9/2020

Numerical investigation of prediction performance of design fire curves for a tunnel fire

Dinesh Myilsamy, Chang Bo Oh, Chi Young Lee

03.09.2020 | Original Article | Ausgabe 9/2020

Fuel injection characteristic measurements under a transient injector driving condition using an injector driving algorithm

Jae Bum Kim, Choong Hoon Lee

03.09.2020 | Original Article | Ausgabe 9/2020

Experimental investigation on penetration performance of larger volume needle-free injection device

Dongping Zeng, Ni Wu, Lei Qian, Hanqing Shi, Yong Kang

03.09.2020 | Original Article | Ausgabe 9/2020

Analysis of nonlinear bioheat transfer equation in magnetic fluid hyperthermia

Zahed Zomordikhani, Mohammadmahdi Attar, Alireza Jahangiri, Farzan Barati

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise