nach oben

Erschienen in:

2013 | OriginalPaper | Buchkapitel

1. Laser Machining and its Associated Effects

verfasst von : C. T. Pan, H. Hocheng

Erschienen in: Advanced Analysis of Nontraditional Machining

Verlag: Springer New York

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Laser machining has a wide range of industrial applications. However, laser energy can cause thermal damage to composite materials during the shaping operation following curing. Such damage leads to poor assembly tolerances and reduces long-term performance. In this study, we investigated the laser machining-induced formation of anisotropic heat-affected zones (HAZs) in fiber-reinforced plastics (FRP). The degree of HAZ is estimated by the isotherm of the matrix char temperature. Analysis revealed that both the laser energy per unit length and the fiber orientation-dependent thermal conductivity are key factors in determining the extent of HAZ. An experimental measurement of anisotropic thermal conductivity for composite materials is developed. Heat conduction is greater along fibers than it is across a fiber section, thus laser scanning direction relative to fiber orientation affects the HAZ geometry. The study also investigated the principal-axis and nonprincipal-axis grooving of unidirectional (UD), [0/90], Mat, and MatUD laminates. An analytical model based on a moving point heat source using the Mirror Image Method and immersed heat source to model principal-axis grooving is adopted to correlate HAZ anisotropy with various process parameters. Finite difference method (FDM) with an isotherm conductivity model and eigenvalue method is applied to simulate the HAZ resulting from nonprincipal-axis grooving.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Electrical Discharge Machining

Dell’Erba M, Galantucci LM, Miglietta S (1992) An experimental study on laser drilling and cutting of composite materials for the aerospace industry using excimer and CO₂ sources. Compos Manuf 3(1):14–19CrossRef

Modest MF, Abakians H (1986) Heat conduction in a moving semi-infinite solid subjected to pulsed laser irradiation. ASME J Heat Transfer 108:597–601CrossRef

Schuocker D (1986) Dynamic phenomena in laser cutting and cut quality. J Appl Phys 40:9–14CrossRef

Schuocker D, Abel W (1983) Material removal mechanism of laser cutting. In: Proceedings of the SPIE, pp 88–95

Yilbas BS (1987) Study of affecting parameters in laser hole drilling of sheet metals. Trans ASME 109:282–285

Anon., Coherent Inc. (1988) Lasers-operation, equipment, application, and design. McGraw-Hill, New York, pp 19–30

Mello MD (1986) Laser cutting of non-metallic composites. In: Proceedings of the SPIE-laser processing: fundamentals, applications, and systems engineering, pp 288–290

Luxon JT, Parker DE (1985) Industrial lasers and their applications. Prentice-Hall, Engelwood Cliffs, NY, pp 200–242

Sturmer E, Von Allmen M (1978) Influence of laser-supported detonation waves on metal drilling with pulsed CO₂ lasers. J Appl Phys 49(11):5648–5654CrossRef

10.

Sepold G, Rothe R (1983) Laser beam cutting of thick steel. ICALEO, SPIE, pp 156–159

11.

Eberhardt G (1983) Survey of high power CO₂ industrial laser applications and latest laser developments. In: Kimmitt MF (ed) Proceedings of first international conference on lasers in manufacturing, IFS Publication, Bedford, pp 13–19

12.

Lee CS, Goel A, Osada H (1985) Parametric studies of pulsed-laser cutting of thin metal plate. J Appl Phys 58(3):1339–1343CrossRef

13.

Hamann C, Rosen H (1987) Laser machining of ceramic and silicon. In: SPIE-high power laser and their industrial applications, vol 801, pp 130–137

14.

Siekman JG (1979) Analysis of laser drilling and cutting results in Al₂O₃ and ferrites. AIP Conf Proc 50:225–231

15.

Chryssolouris G, Bredt J, Kordas S, Wilson E (1988) Theoretical aspect of a laser machine tool. ASME J Eng Industry 110:65–70CrossRef

16.

Chryssolouris G, Sheng P, Choi WC (1990) Three dimensional laser machining of composite materials. ASME J Eng Mater Technol 112:387–392CrossRef

17.

Copley S (1983) Shaping materials with lasers. Laser Mater Process 3:297–336CrossRef

18.

Henderson JB, Wiecek TE (1987) A mathematical model to predict the thermal response of decomposite expanding polymer composite. J Compos Mater 21:373–393CrossRef

19.

Tagliaferri V, Diilio A (1989) Thermal damage in laser cutting of (0/90)2s aramid/epoxy laminates. Composites 20(2):115–119CrossRef

20.

Tagliaferri V, Visconti CI, Diilio A (1987) Machining of fiber reinforced material with laser beam: cut quality evaluation. In: Proceedings of the sixth international conference on composite materials, pp 1.190–1.198

21.

Tagliaferri V, Diilio A, Visconti CI (1985) Laser cutting of fiber-reinforced polyester. Composites 16(4):317–325CrossRef

22.

Chryssolouris G, Sheng P, Anastasia N (1993) Laser grooving of composite materials with the aid of a water jet. ASME J Eng Industry 115:62–72CrossRef

23.

Lau WS, Lee WB (1990) Pulsed Nd: laser cutting of carbon fiber composite materials. Ann CIRP 39:179–182CrossRef

24.

Lienhard JH (1981) A heat transfer handbook. Prentice-Hall, Englewood Cliffs, NY

25.

Hocheng H, Pan CT (1993) HAZ in laser cutting of carbon fiber-reinforced PEEK. In: Proceedings of ASME winter annual meeting, PED, vol 66, pp 153–159

26.

Olsen O (1989) Cutting front formation in laser cutting. Ann CIRP 38:215–218CrossRef

27.

Na SJ, Yang YS (1989) Effect of shielding gas pressure in laser cutting of sheet metals. Trans ASME 111:314–318CrossRef

28.

Duley WW, Gonsalves JN (1974) CO₂ laser cutting of thin metal sheets with gas jet assist. Opt Laser Technol 6(2):78–81CrossRef

29.

Patel RS, Brewster MQ (1991) Gas-assisted laser-metal drilling: theoretical model. J Thermophys 5(1):32–39CrossRef

30.

Lee SL (1989) Weighting function scheme and its application on multidimensional conservation equations. Int J Heat Mass Transfer 32(11):2065–2073CrossRef

31.

Springer GS, Tsai SW (1967) Thermal conductivities of unidirectional materials. J Compos Mater 1:166–173CrossRef

32.

Rolfes R, Hammerschmidet U (1995) Transverse thermal conductivity of CFRP laminates: a numerical and experimental validation of approximation formulae. Compos Sci Technol 54(1):45–54CrossRef

33.

Chawla KK (1987) Composite materials science and engineering. Springer-Verlag, New York

34.

Hashin Z (1983) Analysis of composite material—a survey. J Appl Mech 50:481–505MATHCrossRef

35.

Rayleigh L (1982) On the influence of obstacles arranged in rectangular order upon the properties of a medium. Phil Mag 34:481–489

36.

Mukherjee K, Khan PAA (1990) Laser machining of graphite, kevlar and glass-reinforced composites. In: Proceedings of the American society for composite fifth technical conference, East Lansing, Michigan, pp 91–104

37.

Carslaw HS, Jaeger JC (1959) Conduction of heat in solids. Clarendon, London

38.

Rosenthal D (1946) The theory of moving sources of heat and its applications to metal treatments. Trans ASME 68:849–866

39.

Liebelt S (1992) Modeling and simulation of laser grooving and cutting for isotropic materials and fiber reinforced plastics. Diplomarbeit IWF, Berlin

40.

Hocheng H, Pan CT (1999) The effects of cryogenic surroundings on thermal induced damage in laser grooving of fiber-reinforced plastic. J Mach Sci Technol 3(1):77–90CrossRef

41.

Pan CT, Hocheng H (2001) Evaluation of anisotropic thermal conductivity for unidirectional FRP in laser machining. Compos Part A 32:1657–1667CrossRef

42.

Uhlmann E, Spur G, Hocheng H, Liebelt S, Pan CT (1999) The extent of laser-induced thermal damage of fiber Ud and cross-ply composite laminates. Int J Mach Tool Manuf 39(4):639–650CrossRef

43.

Pan CT, Hocheng H (1998) Prediction of laser-induced thermal damage of fiber mat and fiber matUD-reinforced polymers. J Mater Eng Perform 7(6):751–756CrossRef

44.

Jie BL, Yu BL (1990) Practical thermal analysis. Textile Industry, Taiwan

45.

Cowan RD (1969) Pulse method of measuring thermal diffusivity at high temperature. J Appl Phys 34:927–929

46.

Parker WJ, Jenkins RJ, Butler CP, Abbott GL (1961) A flash method of determining thermal diffusivity heat capacity, and thermal conductivity. J Appl Phys 32:1679–1684CrossRef

47.

Heber A (1994) Modell zur rheologischen auslegung faserverstärkter thermoplastischer preßbauteile, Dissertation RWTH, Aachen, Germany

48.

Carprino G, Tagliaferri V (1988) Maximum cutting speed in laser cutting of fiber reinforced plastics. Int J Mach Tools Manuf 28(4):389–398CrossRef

49.

Tyn Myint U (1973) Partial differential equation of mathematical physics. Elsevier North Holland, New York

50.

Pilling MW, Yates B, Black MA, Tattersall P (1979) The thermal conductivity of carbon fiber-reinforced composites. J Mater Sci 14:1326–1338CrossRef

51.

Spur G, Liebelt St. (1997) Modeling of laser cutting composite and comparison with experiment. In: Fourth international conference of composites engineering (ICCE/4), Big Island, pp 599–600

52.

Powell RW (1951) Thermal conductivities of metallic conductors and their estimation. In: Proceedings of general discussion heat transfer, ASME-IME, London, pp 290–295

53.

Pan CT, Hocheng H (1998) Prediction of extent of heat affected zone in laser grooving of unidirectional fiber-reinforced plastics. J Eng Mater Technol ASME 120:321–327CrossRef

54.

Pan CT, Hocheng H (1996) The anisotropic heat affected zone in laser grooving of fiber reinforced composite material. J Mater Process Technol 62:54–60CrossRef

Titel: Laser Machining and its Associated Effects
verfasst von: C. T. Pan
H. Hocheng
Verlag: Springer New York
Buch: Advanced Analysis of Nontraditional Machining
Print ISBN: 978-1-4614-4053-6

Electronic ISBN: 978-1-4614-4054-3

Copyright-Jahr: 2013
DOI: https://doi.org/10.1007/978-1-4614-4054-3_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht