nach oben

International Journal of Material Forming

Erschienen in:

01.01.2023 | Original Research

Laser shock micro-sheet bulk metal forming: numerical simulation and experimental validation

verfasst von: Tao Zhang, Xiao Wang, Di Zhang, Qifan Gong, Zongbao Shen, Xin Hou, Huixia Liu

Erschienen in: International Journal of Material Forming | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, a new method of laser shock micro-sheet bulk metal forming (LSMSBMF) is proposed in combination with the advantages of near-net sheet forming and laser shock forming. This method not only owns the advantages of high-speed loading, uniform material flow and die filling, but also is suitable for micro-forming. Based on a combination of experiment and numerical simulation, the influence of different laser energy loadings on the forming depth of micro-turbine is studied, and the material flow, stress wave propagation process and inertia effect during LSMSBMF forming process are further analyzed. The results reveal that micro-turbine gear tooth forming depth increases with the increase of laser energy, but the rate of increase slows down. By analyzing the material flow inside the workpiece in the forming process, it can be found that laser shock can improve the formability and material flow uniformity of the workpiece. At the same time, the smoothness of workpiece formation can be improved under the restriction of micro-die cavity. By studying the propagation of stress wave, it is found that elastic wave propagates faster than plastic wave at the beginning of this process, and the micro-turbine is formed by inertia filling the micro-die cavity.

Vorheriger Artikel Residual stresses and deformations of laser additive manufactured metal parts: a review

Nächster Artikel Simulation and experiment research on integrated casting and forging process of automobile control arm

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Merklein M, Allwood JM, Behrens BA, Brosius A, Hagenah H, Kuzman K, Mori K, Tekkaya AE, Weckenmann A (2012) Bulk forming of sheet metal. CIRP Annals Technol 61:725–745. https://doi.org/10.1016/j.cirp.2012.05.007CrossRef

Merklein M, Gröbel D, Löffler M, Schneider T, Hildenbrand P (2015) Sheet-bulk metal forming – forming of functional components from sheet metals. MATEC Web of Conf 21:01001. https://doi.org/10.1051/matecconf/20152101001CrossRef

Merklein M, Hagenah H (2016) Introduction to sheet-bulk metal forming. Prod Eng-Res Dev 10:1–3. https://doi.org/10.1007/s11740-016-0661-zCrossRef

Zhu SF, Zhuang XC, Zhu Y, Zhao Z (2018) Thickening of cup sidewall through sheet-bulk forming with controllable deformation zone. J Mater Process Technol 262:597–604. https://doi.org/10.1016/j.jmatprotec.2018.07.036CrossRef

Merklein M, Koch J, Opel S, Schneider T (2011) Fundamental investigations on the material flow at combined sheet and bulk metal forming processes. CIRP Ann-Manuf Technol 60:283–286. https://doi.org/10.1016/j.cirp.2011.03.146CrossRef

Gröbel D, Koch J, Vierzigmann HU, Engel U, Merklein M (2014) Investigations and approaches on material flow of non-uniform arranged cavities in sheet bulk metal forming processes. Procedia Eng 81:401–406. https://doi.org/10.1016/j.proeng.2014.10.013CrossRef

Chen ZH, Tang CY, Chan LC, Lee TC (1999) Simulation of the sheet metal extrusion process by the enhanced assumed strain finite element method. J Mater Process Technol 91:250–256. https://doi.org/10.1016/S0924-0136(98)00419-1CrossRef

Zhuang XC, Xiang H, Zhao Z (2010) Analysis of sheet metal extrusion process using finite element method. Int J Autom Comput 7:295–302. https://doi.org/10.1007/s11633-010-0506-8CrossRef

Xu Z, Peng L, Bao E (2018) Size effect affected springback in micro/meso scale bending process: Experiments and numerical modeling. J Mater Process Technol 252:407–420. https://doi.org/10.1016/j.jmatprotec.2017.08.040CrossRef

10.

Deng YJ, Peng LF, Lai XM, Fu MW, Lin ZQ (2017) Constitutive modeling of size effect on deformation behaviors of amorphous polymers in micro-scaled deformation. Int J Plast 89:197–222. https://doi.org/10.1016/j.ijplas.2016.11.011CrossRef

11.

Schubert A, Jahn SF, Müller B (2014) Evaluation of tribological properties of AlMg4.5Mn0.7 in massive microforming using the barrel compression test. Key Eng Mater 611–612:597–605. https://doi.org/10.4028/www.scientific.net/KEM.611-612.597CrossRef

12.

Barbier C, Thibaud S, Picart P (2008) Size effects on material behaviour in microforming. Int J Mater Form 1:439–442. https://doi.org/10.1007/s12289-008-0CrossRef

13.

Nam JS, Lee SW, Kim HS (2014) Investigations into the size effect on plastic deformation behavior of metallic materials in microcoining process. Int J Precis Eng Manuf 15:5–11. https://doi.org/10.1007/s12541-013-0300-yCrossRef

14.

Jeswiet J, Geiger M, Engel U, Kleiner M, Schikorra M, Duflou J, Neugebauer R, Bariani P, Bruschi S (2008) Metal forming progress since 2000. CIRP J Manuf Sci Technol 1:2–17. https://doi.org/10.1016/j.cirpj.2008.06.005CrossRef

15.

Lee EH, Wolf H (1951) Plastic-wave propagation effects in high-speed testing. J Appl Mech 18(4):379–386. https://doi.org/10.1115/1.4010354CrossRef

16.

Mynors DJ, Zhang B (2002) Applications and capabilities of explosive forming. J Mater Process Technol 125–126:1–25. https://doi.org/10.1016/S0924-0136(02)00413-2CrossRef

17.

Kleiner M, Brosius A (2006) Determination of flow curves at high strain rates using the electromagnetic forming process and an iterative finite element simulation scheme. CIRP Ann-Manuf Technol 55:267–270. https://doi.org/10.1016/s0007-8506(07)60413-2CrossRef

18.

Mynors DJ, Zhang B (2022) Applications and capabilities of explosive forming. J Mater Process Technol 125:1–25. https://doi.org/10.1016/S0924-0136(02)00413-2CrossRef

19.

Cao Q, Lai Z, Xiong Q, Chen Q, Li L (2016) Electromagnetic attractive forming of sheet metals by means of a dual-frequency discharge current: design and implementation. Int J Adv Manuf Tech 90:309–316. https://doi.org/10.1007/s00170-016-9329-2CrossRef

20.

Qiu L, Yu Y, Wang Z, Yang Y, Pan S (2018) Analysis of electromagnetic force and deformation behavior in electromagnetic forming with different coil systems. Int J Appl Electrom 57:337–345. https://doi.org/10.3233/JAE-170163CrossRef

21.

Kuhfuss B, Schenck C, Wilhelmi P, Langstädtler L (2014) Electromagnetic linked micro part processing. Procedia Eng 81:2135–2140. https://doi.org/10.1016/j.proeng.2014.10.298CrossRef

22.

Zhou M, Zhang YK, Cai L (2002) Laser shock forming on coated metal sheets characterized by ultrahigh-strain-rate plastic deformation. J Appl Phys 91(8):5501–5503. https://doi.org/10.1063/1.1459624CrossRef

23.

Vollertsen F, Niehoff HS, Wielage H (2009) On the acting pressure in laser deep drawing. Prod Eng Res Dev 3(1):1–8. https://doi.org/10.1007/s11740-008-0135-zCrossRef

24.

Cheng GJ, Pirzada D, Zhou M (2007) Microstructure and mechanical property characterizations of metal foil after microscale laser dynamic forming. J Appl Phys 101(6):345–360. https://doi.org/10.1063/1.2710334CrossRef

25.

Liu HX, Shen ZB, Wang X, Li P, Hu Y, Gu CX (2012) Feasibility investigations on a novel micro-embossing using laser-driven flyer. Opt Laser Technol 44(6):1987–1991. https://doi.org/10.1016/j.optlastec.2012.02.010CrossRef

26.

Wang KY, Liu HX, Ma YJ, Lu JZ, Wang X, Lu JX, Gu X, Zhang HK (2021) Laser shock micro-bulk forming: Numerical simulation and experimental research. J Manuf Processes 64:1273–1286. https://doi.org/10.1016/j.jmapro.2021.02.049CrossRef

27.

Gong QF, Wang X, Zhang T, Hou X, Shen ZB, Liu HX (2021) Warm laser shock micro-heading forming (T2 copper): numerical simulation and experimental research. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-021-08334-2CrossRef

28.

Zhang DN, Shangguan QQ, Xie CJ, Liu F (2015) A modified Johnson-Cook model of dynamic tensile behaviors for 7075–T6 aluminum alloy. J Alloys Compd 619(15):186–194. https://doi.org/10.1016/j.jallcom.2014.09.002CrossRef

29.

Hughes TJR, Liu WK, Zimmermann TK (1981) Lagrangian-Eulerian finite element formulation for incompressible viscous flows. Comput Meth Appl Mech Eng 29(3):329–349. https://doi.org/10.1016/0045-7825(81)90049-9CrossRefMATH

30.

Assadi H, Gärtner F, Stoltenhoff T, Kreye H (2003) Bonding mechanism in cold gas spraying. Acta Mater 51(15):4379–4394. https://doi.org/10.1016/s1359-6454(03)00274-xCrossRef

31.

Fabbro R, Fournier J, Ballard P, Devaux D, Virmont J (1990) Physical study of laser-produced plasma in confined geometry. J Appl Phys 68(2):775–784. https://doi.org/10.1063/1.346783CrossRef

32.

Zheng C, Sun S, Ji Z, Wang W, Liu J (2010) Numerical simulation and experimentation of micro scale laser bulge forming. Int J Mach Tool Manu 50:1048–1056. https://doi.org/10.1016/j.ijmachtools.2010.08.012CrossRef

33.

Liu HX, Gong JX, Ma YJ, Cui J, Wang X (2020) Investigation of novel laser shock hydroforming method on micro tube bulging. Opt Laser Eng 129:106073. https://doi.org/10.1016/j.optlaseng.2020.106073CrossRef

34.

Peyre P, Fabbro R (1995) Laser shock processing: a review of the physics and applications. Opt Quantum Electron 27(12):1213–1229. https://doi.org/10.1007/BF00326477CrossRef

35.

Zhu WH, Yu TX, Li ZY (2000) Laser-induced shock waves in PMMA confined foils. Int J Impact Eng 24:641–657. https://doi.org/10.1016/S0734-743X(00)00002-6CrossRef

36.

Wang CJ, Guo B, Shan DB (2011) Polycrystalline model for FE-simulation of micro forming processes. Trans Nonferrous Met Soc China 21(6):1362–1366. https://doi.org/10.1016/s1003-6326(11)60866-2CrossRef

37.

Zheng C, Tian Z, Zhao X, Tan Y, Zhang G, Zhao G, Ji Z (2020) Effect of pulsed laser parameters on deformation inhomogeneity in laser shock incremental forming of pure copper foil. Opt Laser Technol 127:106205. https://doi.org/10.1016/j.optlastec.2020.106205CrossRef

38.

Wang ZJ, Cheng LD (2008) Effect of material parameters on stress wave propagation during fast upsetting. Trans Nonferrous Met Soc China 18(5):1189–1195. https://doi.org/10.1016/S1003-6326(08)60203-4CrossRef

39.

Cheng LD (2009) Numerical simulation investigation of high speed bulk forming process, Harbin Institute of Technology (People's Republic of China), Ann Arbor

40.

Clifton RJ (1985) Stress wave experiments in plasticity. Int J Plast 1(4):289–302. https://doi.org/10.1016/0749-6419(85)90016-6CrossRef

41.

Gong YJ, Zhang G (1990) Factors affecting the inertial filling of die cavities in forging. J Mater Process Technol 25(3):297–302. https://doi.org/10.1016/0924-0136(91)90114-TCrossRef

42.

Nagarajan B, Castagne S, Wang Z, Zheng HY, Nadarajan K (2015) Influence of plastic deformation in flexible pad laser shock forming – experimental and numerical analysis. Int J Mater Form 10:109–123. https://doi.org/10.1007/s12289-015-1264-5CrossRef

43.

Liu HX, Sun XQ, Shen ZB, Li L, Sha C, Ma Y, Gau JT, Wang X (2017) Experimental and numerical simulation investigation on laser flexible shock micro-bulging. Metals 7:93–108. https://doi.org/10.3390/met7030093

Titel: Laser shock micro-sheet bulk metal forming: numerical simulation and experimental validation
verfasst von: Tao Zhang
Xiao Wang
Di Zhang
Qifan Gong
Zongbao Shen
Xin Hou
Huixia Liu
Publikationsdatum: 01.01.2023
Verlag: Springer Paris
Erschienen in: International Journal of Material Forming / Ausgabe 1/2023
Print ISSN: 1960-6206
Elektronische ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-022-01723-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Numerical analysis and experimental validation in determining optimum multi-angular twist channel extrusion die geometries

Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study

Large strain flow curve characterization considering strain rate and thermal effect for 5182-O aluminum alloy

Simulation and experiment research on integrated casting and forging process of automobile control arm

Genetic effects of dynamic recrystallization on ductile fracture at elevated temperature for AA7075 alloy with various stress states: modeling and simulation

A numerical study on the effects of DP steel microstructure on the yield locus and the stress–strain response under strain path change

Premium Partner

Marktübersichten